All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Subject: [PULL 1/3] ipxe: update submodule
Date: Tue,  8 Sep 2020 08:10:44 +0200	[thread overview]
Message-ID: <20200908061046.10871-2-kraxel@redhat.com> (raw)
In-Reply-To: <20200908061046.10871-1-kraxel@redhat.com>

master snapshot, most recent commit from Aug 23th

shortlog
========

Andrew Grasso (1):
      [intel] Add INTEL_NO_PHY_RST for I218LM

Ben Bleything (1):
      [intel] Set INTEL_NO_PHY_RST on i218v

Bobby Lockwood (1):
      [libgcc] Change __divmoddi4 from int64 [unknown] to int64_t

Bruce Rogers (1):
      [build] Be explicit about -fcommon compiler directive

Christian Nilsson (1):
      [intel] Add PCI ID for I219-V and -LM 6 to 9

Daniel Johnson (1):
      [deflate] Fix typo in comment describing length codes

David Decotigny (2):
      [pcbios] Fix "out of memory" detection when expanding bottom area
      [pcbios] Take alignment into account when checking for available space

Dentcho Ludmilov Bankov (1):
      [comboot] Fix stack pointer retrieval after COM32 binary returns

Ignat Korchagin (3):
      [snp] Try promiscuous multicast receive filter if the regular one fails
      [snp] Set EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit as per UEFI spec
      [efi] Check the status code from AllocatePool()

Joe Groocock (1):
      [cmdline] Add "--timeout" parameter to "ifconf" command

Joseph Wong (1):
      [bnxt] Add driver support for Broadcom NetXtreme-E Adapters

LaDerrick H (1):
      [sfc] Add PCI ID for Solarflare SFC9120 and Solarflare SFC9140

Michael Brown (105):
      [init] Show startup and shutdown function names in debug messages
      [efi] Blacklist the Dell Ip4ConfigDxe driver
      [tls] Support stateful session resumption
      [tls] Fix incorrectly duplicated error number
      [tls] Support stateless session resumption
      [crypto] Use x509_name() in validator debug messages
      [tls] Display cross-certificate and OCSP status messages
      [tls] Display validator messages only while validation is in progress
      [tcp] Display "connecting" status until connection is established
      [ocsp] Accept response certID with missing hashAlgorithm parameters
      [pci] Add support for PCI MSI-X interrupts
      [vlan] Provide vlan_netdev_rx() and vlan_netdev_rx_err()
      [intelxl] Use VLAN tag in receive descriptor if present
      [intelxl] Allow for virtual function admin queue register maps
      [intelxl] Use one admin queue buffer per admin queue descriptor
      [intelxl] Allow admin queues to be reinitialised
      [intelxl] Allow admin cookie to hold extended opcode and return code
      [intelxl] Provide a mechanism for handling "send to VF" events
      [intelxl] Use 32-byte receive descriptors
      [intelxl] Allow for arbitrary placement of ring tail registers
      [intelxl] Split out ring creation from context programming
      [intelxl] Allow for arbitrary placement of interrupt control register
      [intelxl] Expose functions required by virtual function driver
      [intelxl] Choose to operate in non-PXE mode
      [intelxl] Add driver for Intel 40 Gigabit Ethernet NIC virtual functions
      [build] Fix use of inline assembly on GCC 8 ARM64 builds
      [arm] Provide dummy implementations for {in,out}[s]{b,w,l}
      [efi] Return only registered EFI devices from efidev_parent()
      [fdt] Add ability to parse a MAC address from a flattened device tree
      [efi] Register a device tree if provided by the platform firmware
      [smsc95xx] Fetch MAC from device tree for Raspberry Pi
      [build] Add named configuration for Raspberry Pi
      [smscusb] Fetch MAC from device tree for Raspberry Pi Model B+
      [build] Do not apply WORKAROUND_CFLAGS for host compiler
      [build] Move predefined all-drivers build shortcut to Makefile
      [build] Add predefined shortcut for Raspberry Pi builds
      [process] Add PROC_INIT() for initialising static processes
      [peerdist] Start block download timers from within opener methods
      [peerdist] Limit number of concurrent raw block downloads
      [tls] Add missing call to tls_tx_resume() when restarting negotiation
      [crypto] Drag in configured digestInfo prefixes for any use of RSA
      [crypto] Profile the various stages of modular multiplication
      [coverity] Override assumptions about wcrtomb() and hmac_init()
      [ethernet] Avoid false positive Coverity warning
      [golan] Fix address-of-pointer bug for multicast attach/detach
      [efi] Report failed control transfers as expected by the USB core
      [efi] Do not attempt EFI_USB_IO_PROTOCOL transfers during shutdown
      [lan78xx] Always enable automatic speed and duplex detection
      [peerdist] Allow PeerDist to be globally enabled or disabled
      [peerdist] Allow for the use of a hosted cache server
      [build] Construct full version number automatically from git revision
      [travis] Ensure that most recent tag is always available
      [tftp] Eliminate unnecessary variable-length stack allocation
      [infiniband] Eliminate variable-length stack allocation
      [slam] Eliminate variable-length stack allocation
      [slam] Allow for the possibility of IPv6 multicast addresses
      [settings] Eliminate variable-length stack allocation
      [iscsi] Eliminate variable-length stack allocations in CHAP handlers
      [iscsi] Eliminate variable-length stack allocation in URI parsing
      [bios] Define macros for constructing partition table entries
      [int13con] Create log partition only when CONSOLE_INT13 is enabled
      [efi] Disambiguate errors returned by ConnectController
      [png] Fix potential integer overflow
      [efi] Work around UEFI specification bug in LoadImage
      [efi] Work around UEFI specification bug in LoadImage for SAN boot
      [uri] Avoid appearing to access final byte of a potentially empty string
      [efi] Attempt to connect our driver directly if ConnectController fails
      [tls] Allow a minimum TLS protocol version to be specified
      [tls] Default to supporting only TLSv1.1 or above
      [crypto] Allow algorithms to be included without being OID-identifiable
      [crypto] Ensure that test code drags in required ASN.1 object identifiers
      [crypto] Disable MD5 as an OID-identifiable algorithm by default
      [snp] Retry initialisation if link is reported as down
      [util] Treat empty integer strings as invalid
      [parseopt] Treat empty integer strings in user input as invalid
      [efi] Enable stack protection where possible
      [ocsp] Accept SHA1 certID responses even if SHA1 is not enabled
      [intel] Avoid spurious compiler warning on GCC 10
      [golan] Add explicit type casts for nodnic_queue_pair_type
      [build] Disable position-independent code for ARM64 EFI builds
      [efi] Detect and disable seriously broken EFI_RNG_PROTOCOL implementations
      [efi] Raise TPL during driver entry point
      [axge] Handle non-gigabit link speeds
      [usb] Clear device endpoint halt before resetting host endpoint
      [usb] Add missing usb_recycle() for completed hub interrupt transfers
      [usb] Do not attempt to disable USB3 hub ports
      [xhci] Set link state to RxDetect after disabling USB3 root hub port
      [usb] Avoid unnecessary calls to usb_hub_set_drvdata()
      [xhci] Increase link state settling delay to 100ms
      [axge] Reapply USB device configuration when opening network device
      [usb] Leave port enabled after a failed device registration
      [crypto] Avoid temporarily setting direction flag in bigint_is_geq()
      [libc] Provide an unoptimised generic_memcpy_reverse()
      [efi] Avoid setting direction flag on EFI platforms
      [libc] Add bit-rotation functions for unsigned long values
      [efi] Distribute available entropy within stack cookie
      [efi] Ensure NUL byte is at lowest address within stack cookie
      [efi] Claim SNP devices early in efi_download_start()
      [xfer] Remove address family from definition of a socket opener
      [dns] Use all configured DNS servers
      [wpa] Fix erroneous debug message in wpa_derive_ptk
      [efi] Match EDK2 numbering for USB ports
      [efi] Use device path to locate filesystem from which we were loaded
      [efi] Attempt NII initialisation both with and without cable detection
      [build] Fix building on older versions of gcc

Michael J. Bazzinotti (1):
      [libc] Fix memcmp() to return proper values

Mohammed (1):
      [golan] Add various new PCI device IDs

Rob Taglang (1):
      [intelx] Added PCI_ROM entry for Intel x553/x557-AT and x553 (SFP+) NICs

Tobias Kortkamp (1):
      [build] Fix a GNUism that FreeBSD's sed(1) cannot deal with

Valentine Barshak (2):
      [build] Fix "'%s' directive argument is null" error
      [build] Workaround compilation error with gcc 9.1

bit (1):
      [build] Fix default target in sdsk image

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 roms/ipxe | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/roms/ipxe b/roms/ipxe
index de4565cbe76e..4bd064de239d 160000
--- a/roms/ipxe
+++ b/roms/ipxe
@@ -1 +1 @@
-Subproject commit de4565cbe76ea9f7913a01f331be3ee901bb6e17
+Subproject commit 4bd064de239dab2426b31c9789a1f4d78087dc63
-- 
2.27.0



  reply	other threads:[~2020-09-08  6:13 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-08  6:10 [PULL 0/3] Sirius/ipxe 20200908 patches Gerd Hoffmann
2020-09-08  6:10 ` Gerd Hoffmann [this message]
2020-09-08  6:10 ` [PULL 2/3] ipxe: drop ia32 efi roms Gerd Hoffmann
2020-09-08  6:10 ` [PULL 3/3] ipxe: update binaries Gerd Hoffmann
2020-09-08  9:56 ` [PULL 0/3] Sirius/ipxe 20200908 patches Laszlo Ersek
2020-09-08 22:48 ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200908061046.10871-2-kraxel@redhat.com \
    --to=kraxel@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.