From: Grygorii Strashko <grygorii.strashko@ti.com> To: Peter Ujfalusi <peter.ujfalusi@ti.com>, Tero Kristo <t-kristo@ti.com>, Rob Herring <robh+dt@kernel.org>, Nishanth Menon <nm@ti.com>, Kishon Vijay Abraham I <kishon@ti.com> Cc: Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, Vignesh Raghavendra <vigneshr@ti.com>, Suman Anna <s-anna@ti.com>, Grygorii Strashko <grygorii.strashko@ti.com> Subject: [PATCH v2 2/4] arm64: dts: ti: k3-j7200-main: add main navss cpts node Date: Tue, 8 Sep 2020 19:59:40 +0300 [thread overview] Message-ID: <20200908165942.32368-3-grygorii.strashko@ti.com> (raw) In-Reply-To: <20200908165942.32368-1-grygorii.strashko@ti.com> Add DT node for Main NAVSS CPTS module. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index cc4ff380a7bc..822c062e25c8 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -117,6 +117,18 @@ <0x0c>; /* RX_UHCHAN */ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ }; + + cpts@310d0000 { + compatible = "ti,j721e-cpts"; + reg = <0x0 0x310d0000 0x0 0x400>; + reg-names = "cpts"; + clocks = <&k3_clks 201 1>; + clock-names = "cpts"; + interrupts-extended = <&main_navss_intr 391>; + interrupt-names = "cpts"; + ti,cpts-periodic-outputs = <6>; + ti,cpts-ext-ts-inputs = <8>; + }; }; main_pmx0: pinmux@11c000 { -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Grygorii Strashko <grygorii.strashko@ti.com> To: Peter Ujfalusi <peter.ujfalusi@ti.com>, Tero Kristo <t-kristo@ti.com>, Rob Herring <robh+dt@kernel.org>, Nishanth Menon <nm@ti.com>, Kishon Vijay Abraham I <kishon@ti.com> Cc: devicetree@vger.kernel.org, Grygorii Strashko <grygorii.strashko@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Sekhar Nori <nsekhar@ti.com>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 2/4] arm64: dts: ti: k3-j7200-main: add main navss cpts node Date: Tue, 8 Sep 2020 19:59:40 +0300 [thread overview] Message-ID: <20200908165942.32368-3-grygorii.strashko@ti.com> (raw) In-Reply-To: <20200908165942.32368-1-grygorii.strashko@ti.com> Add DT node for Main NAVSS CPTS module. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index cc4ff380a7bc..822c062e25c8 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -117,6 +117,18 @@ <0x0c>; /* RX_UHCHAN */ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ }; + + cpts@310d0000 { + compatible = "ti,j721e-cpts"; + reg = <0x0 0x310d0000 0x0 0x400>; + reg-names = "cpts"; + clocks = <&k3_clks 201 1>; + clock-names = "cpts"; + interrupts-extended = <&main_navss_intr 391>; + interrupt-names = "cpts"; + ti,cpts-periodic-outputs = <6>; + ti,cpts-ext-ts-inputs = <8>; + }; }; main_pmx0: pinmux@11c000 { -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-08 17:00 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-08 16:59 [PATCH v2 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw Grygorii Strashko 2020-09-08 16:59 ` Grygorii Strashko 2020-09-08 16:59 ` [PATCH v2 1/4] arm64: dts: ti: k3-j7200: add DMA support Grygorii Strashko 2020-09-08 16:59 ` Grygorii Strashko 2020-09-08 16:59 ` Grygorii Strashko [this message] 2020-09-08 16:59 ` [PATCH v2 2/4] arm64: dts: ti: k3-j7200-main: add main navss cpts node Grygorii Strashko 2020-09-08 16:59 ` [PATCH v2 3/4] arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node Grygorii Strashko 2020-09-08 16:59 ` Grygorii Strashko 2020-09-08 16:59 ` [PATCH v2 4/4] arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs Grygorii Strashko 2020-09-08 16:59 ` Grygorii Strashko 2020-09-10 7:38 ` [PATCH v2 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw Kishon Vijay Abraham I 2020-09-10 7:38 ` Kishon Vijay Abraham I
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200908165942.32368-3-grygorii.strashko@ti.com \ --to=grygorii.strashko@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=nsekhar@ti.com \ --cc=peter.ujfalusi@ti.com \ --cc=robh+dt@kernel.org \ --cc=s-anna@ti.com \ --cc=t-kristo@ti.com \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.