All of lore.kernel.org
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com, martin.blumenstingl@googlemail.com,
	devicetree@vger.kernel.org
Cc: linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Neil Armstrong <narmstrong@baylibre.com>,
	linux-usb@vger.kernel.org
Subject: [PATCH 2/5] dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: add the Amlogic AXG Families USB Glue Bindings
Date: Wed,  9 Sep 2020 18:04:06 +0200	[thread overview]
Message-ID: <20200909160409.8678-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20200909160409.8678-1-narmstrong@baylibre.com>

The Amlogic AXG is close from the GXL Glue but with a single OTG PHY.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../usb/amlogic,meson-g12a-usb-ctrl.yaml      | 22 ++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
index 5b04a7dfa018..c0058332b967 100644
--- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
+++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
@@ -25,13 +25,14 @@ description: |
   The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in
   host-only mode.
 
-  The Amlogic GXL & GXM SoCs doesn't embed an USB3 PHY.
+  The Amlogic GXL, GXM & AXG SoCs doesn't embed an USB3 PHY.
 
 properties:
   compatible:
     enum:
       - amlogic,meson-gxl-usb-ctrl
       - amlogic,meson-gxm-usb-ctrl
+      - amlogic,meson-axg-usb-ctrl
       - amlogic,meson-g12a-usb-ctrl
       - amlogic,meson-a1-usb-ctrl
 
@@ -151,6 +152,25 @@ allOf:
 
       required:
         - clock-names
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-usb-ctrl
+
+    then:
+      properties:
+        phy-names:
+          items:
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: ddr
+      required:
+        - clock-names
   - if:
       properties:
         compatible:
-- 
2.22.0


WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com, martin.blumenstingl@googlemail.com,
	devicetree@vger.kernel.org
Cc: linux-amlogic@lists.infradead.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 2/5] dt-bindings: usb: amlogic, meson-g12a-usb-ctrl: add the Amlogic AXG Families USB Glue Bindings
Date: Wed,  9 Sep 2020 18:04:06 +0200	[thread overview]
Message-ID: <20200909160409.8678-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20200909160409.8678-1-narmstrong@baylibre.com>

The Amlogic AXG is close from the GXL Glue but with a single OTG PHY.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../usb/amlogic,meson-g12a-usb-ctrl.yaml      | 22 ++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
index 5b04a7dfa018..c0058332b967 100644
--- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
+++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
@@ -25,13 +25,14 @@ description: |
   The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in
   host-only mode.
 
-  The Amlogic GXL & GXM SoCs doesn't embed an USB3 PHY.
+  The Amlogic GXL, GXM & AXG SoCs doesn't embed an USB3 PHY.
 
 properties:
   compatible:
     enum:
       - amlogic,meson-gxl-usb-ctrl
       - amlogic,meson-gxm-usb-ctrl
+      - amlogic,meson-axg-usb-ctrl
       - amlogic,meson-g12a-usb-ctrl
       - amlogic,meson-a1-usb-ctrl
 
@@ -151,6 +152,25 @@ allOf:
 
       required:
         - clock-names
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-usb-ctrl
+
+    then:
+      properties:
+        phy-names:
+          items:
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: ddr
+      required:
+        - clock-names
   - if:
       properties:
         compatible:
-- 
2.22.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com, martin.blumenstingl@googlemail.com,
	devicetree@vger.kernel.org
Cc: linux-amlogic@lists.infradead.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 2/5] dt-bindings: usb: amlogic, meson-g12a-usb-ctrl: add the Amlogic AXG Families USB Glue Bindings
Date: Wed,  9 Sep 2020 18:04:06 +0200	[thread overview]
Message-ID: <20200909160409.8678-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20200909160409.8678-1-narmstrong@baylibre.com>

The Amlogic AXG is close from the GXL Glue but with a single OTG PHY.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../usb/amlogic,meson-g12a-usb-ctrl.yaml      | 22 ++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
index 5b04a7dfa018..c0058332b967 100644
--- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
+++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
@@ -25,13 +25,14 @@ description: |
   The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in
   host-only mode.
 
-  The Amlogic GXL & GXM SoCs doesn't embed an USB3 PHY.
+  The Amlogic GXL, GXM & AXG SoCs doesn't embed an USB3 PHY.
 
 properties:
   compatible:
     enum:
       - amlogic,meson-gxl-usb-ctrl
       - amlogic,meson-gxm-usb-ctrl
+      - amlogic,meson-axg-usb-ctrl
       - amlogic,meson-g12a-usb-ctrl
       - amlogic,meson-a1-usb-ctrl
 
@@ -151,6 +152,25 @@ allOf:
 
       required:
         - clock-names
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-usb-ctrl
+
+    then:
+      properties:
+        phy-names:
+          items:
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: ddr
+      required:
+        - clock-names
   - if:
       properties:
         compatible:
-- 
2.22.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2020-09-09 16:07 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-09 16:04 [PATCH 0/5] usb: dwc-meson-g12a: Add support for USB on S400 board Neil Armstrong
2020-09-09 16:04 ` Neil Armstrong
2020-09-09 16:04 ` Neil Armstrong
2020-09-09 16:04 ` [PATCH 1/5] phy: amlogic: phy-meson-gxl-usb2: keep ID pull-up even in Host mode Neil Armstrong
2020-09-09 16:04   ` Neil Armstrong
2020-09-09 16:04   ` Neil Armstrong
2020-09-15 19:53   ` Martin Blumenstingl
2020-09-15 19:53     ` Martin Blumenstingl
2020-09-15 19:53     ` Martin Blumenstingl
2020-09-09 16:04 ` Neil Armstrong [this message]
2020-09-09 16:04   ` [PATCH 2/5] dt-bindings: usb: amlogic, meson-g12a-usb-ctrl: add the Amlogic AXG Families USB Glue Bindings Neil Armstrong
2020-09-09 16:04   ` Neil Armstrong
2020-09-15 17:32   ` Rob Herring
2020-09-15 17:32     ` Rob Herring
2020-09-15 17:32     ` Rob Herring
2020-09-15 19:56   ` [PATCH 2/5] dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: " Martin Blumenstingl
2020-09-15 19:56     ` Martin Blumenstingl
2020-09-15 19:56     ` Martin Blumenstingl
2020-09-09 16:04 ` [PATCH 3/5] usb: dwc-meson-g12a: Add support for USB on AXG SoCs Neil Armstrong
2020-09-09 16:04   ` Neil Armstrong
2020-09-09 16:04   ` Neil Armstrong
2020-09-15 19:59   ` Martin Blumenstingl
2020-09-15 19:59     ` Martin Blumenstingl
2020-09-15 19:59     ` Martin Blumenstingl
2020-09-16  7:11     ` Neil Armstrong
2020-09-16  7:11       ` Neil Armstrong
2020-09-16  7:11       ` Neil Armstrong
2020-09-09 16:04 ` [PATCH 4/5] arm64: dts: meson-axg: add USB nodes Neil Armstrong
2020-09-09 16:04   ` Neil Armstrong
2020-09-09 16:04   ` Neil Armstrong
2020-09-15 20:04   ` Martin Blumenstingl
2020-09-15 20:04     ` Martin Blumenstingl
2020-09-15 20:04     ` Martin Blumenstingl
2020-09-16  7:10     ` Neil Armstrong
2020-09-16  7:10       ` Neil Armstrong
2020-09-16  7:10       ` Neil Armstrong
2020-09-09 16:04 ` [PATCH 5/5] arm64: dts: meson-axg-s400: enable USB OTG Neil Armstrong
2020-09-09 16:04   ` Neil Armstrong
2020-09-09 16:04   ` Neil Armstrong
2020-09-15 20:05   ` Martin Blumenstingl
2020-09-15 20:05     ` Martin Blumenstingl
2020-09-15 20:05     ` Martin Blumenstingl
2020-09-16  7:09     ` Neil Armstrong
2020-09-16  7:09       ` Neil Armstrong
2020-09-16  7:09       ` Neil Armstrong
2020-09-14 17:57 ` [PATCH 0/5] usb: dwc-meson-g12a: Add support for USB on S400 board Kevin Hilman
2020-09-14 17:57   ` Kevin Hilman
2020-09-14 17:57   ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200909160409.8678-3-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.