From: Krzysztof Kozlowski <krzk@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Krzysztof Opasiak <k.opasiak@samsung.com>,
Kukjin Kim <kgene@kernel.org>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-nfc@lists.01.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH v3 1/8] dt-bindings: net: nfc: s3fwrn5: Convert to dtschema
Date: Thu, 10 Sep 2020 18:12:12 +0200 [thread overview]
Message-ID: <20200910161219.6237-2-krzk@kernel.org> (raw)
In-Reply-To: <20200910161219.6237-1-krzk@kernel.org>
Convert the Samsung S3FWRN5 NCI NFC controller bindings to dtschema.
This is conversion only so it includes properties with invalid prefixes
(s3fwrn5,en-gpios) which should be addressed later.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../devicetree/bindings/net/nfc/s3fwrn5.txt | 25 --------
.../bindings/net/nfc/samsung,s3fwrn5.yaml | 61 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 62 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
create mode 100644 Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
deleted file mode 100644
index f02f6fb7f81c..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Samsung S3FWRN5 NCI NFC Controller
-
-Required properties:
-- compatible: Should be "samsung,s3fwrn5-i2c".
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
-- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
- sleep/wakeup control
-
-Example:
-
-&hsi2c_4 {
- s3fwrn5@27 {
- compatible = "samsung,s3fwrn5-i2c";
-
- reg = <0x27>;
-
- interrupt-parent = <&gpa1>;
- interrupts = <3 0 0>;
-
- s3fwrn5,en-gpios = <&gpf1 4 0>;
- s3fwrn5,fw-gpios = <&gpj0 2 0>;
- };
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
new file mode 100644
index 000000000000..f43d31a2d94b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/samsung,s3fwrn5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3FWRN5 NCI NFC Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Krzysztof Opasiak <k.opasiak@samsung.com>
+
+properties:
+ compatible:
+ const: samsung,s3fwrn5-i2c
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ s3fwrn5,en-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used for enabling/disabling the chip
+
+ s3fwrn5,fw-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used to enter firmware mode and sleep/wakeup control
+
+additionalProperties: false
+
+required:
+ - compatible
+ - interrupts
+ - reg
+ - s3fwrn5,en-gpios
+ - s3fwrn5,fw-gpios
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ s3fwrn5@27 {
+ compatible = "samsung,s3fwrn5-i2c";
+ reg = <0x27>;
+
+ interrupt-parent = <&gpa1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+
+ s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+ s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index ac79fdbdf8d0..ec4f1d9cb3dc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15273,6 +15273,7 @@ M: Robert Baldyga <r.baldyga@samsung.com>
M: Krzysztof Opasiak <k.opasiak@samsung.com>
L: linux-nfc@lists.01.org (moderated for non-subscribers)
S: Supported
+F: Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
F: drivers/nfc/s3fwrn5
SAMSUNG S5C73M3 CAMERA DRIVER
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: linux-nfc@lists.01.org
Subject: [linux-nfc] [PATCH v3 1/8] dt-bindings: net: nfc: s3fwrn5: Convert to dtschema
Date: Thu, 10 Sep 2020 18:12:12 +0200 [thread overview]
Message-ID: <20200910161219.6237-2-krzk@kernel.org> (raw)
In-Reply-To: 20200910161219.6237-1-krzk@kernel.org
[-- Attachment #1: Type: text/plain, Size: 3752 bytes --]
Convert the Samsung S3FWRN5 NCI NFC controller bindings to dtschema.
This is conversion only so it includes properties with invalid prefixes
(s3fwrn5,en-gpios) which should be addressed later.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../devicetree/bindings/net/nfc/s3fwrn5.txt | 25 --------
.../bindings/net/nfc/samsung,s3fwrn5.yaml | 61 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 62 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
create mode 100644 Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
deleted file mode 100644
index f02f6fb7f81c..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Samsung S3FWRN5 NCI NFC Controller
-
-Required properties:
-- compatible: Should be "samsung,s3fwrn5-i2c".
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
-- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
- sleep/wakeup control
-
-Example:
-
-&hsi2c_4 {
- s3fwrn5@27 {
- compatible = "samsung,s3fwrn5-i2c";
-
- reg = <0x27>;
-
- interrupt-parent = <&gpa1>;
- interrupts = <3 0 0>;
-
- s3fwrn5,en-gpios = <&gpf1 4 0>;
- s3fwrn5,fw-gpios = <&gpj0 2 0>;
- };
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
new file mode 100644
index 000000000000..f43d31a2d94b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/samsung,s3fwrn5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3FWRN5 NCI NFC Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Krzysztof Opasiak <k.opasiak@samsung.com>
+
+properties:
+ compatible:
+ const: samsung,s3fwrn5-i2c
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ s3fwrn5,en-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used for enabling/disabling the chip
+
+ s3fwrn5,fw-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used to enter firmware mode and sleep/wakeup control
+
+additionalProperties: false
+
+required:
+ - compatible
+ - interrupts
+ - reg
+ - s3fwrn5,en-gpios
+ - s3fwrn5,fw-gpios
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ s3fwrn5@27 {
+ compatible = "samsung,s3fwrn5-i2c";
+ reg = <0x27>;
+
+ interrupt-parent = <&gpa1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+
+ s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+ s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index ac79fdbdf8d0..ec4f1d9cb3dc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15273,6 +15273,7 @@ M: Robert Baldyga <r.baldyga@samsung.com>
M: Krzysztof Opasiak <k.opasiak@samsung.com>
L: linux-nfc@lists.01.org (moderated for non-subscribers)
S: Supported
+F: Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
F: drivers/nfc/s3fwrn5
SAMSUNG S5C73M3 CAMERA DRIVER
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Krzysztof Opasiak <k.opasiak@samsung.com>,
Kukjin Kim <kgene@kernel.org>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-nfc@lists.01.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH v3 1/8] dt-bindings: net: nfc: s3fwrn5: Convert to dtschema
Date: Thu, 10 Sep 2020 18:12:12 +0200 [thread overview]
Message-ID: <20200910161219.6237-2-krzk@kernel.org> (raw)
In-Reply-To: <20200910161219.6237-1-krzk@kernel.org>
Convert the Samsung S3FWRN5 NCI NFC controller bindings to dtschema.
This is conversion only so it includes properties with invalid prefixes
(s3fwrn5,en-gpios) which should be addressed later.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../devicetree/bindings/net/nfc/s3fwrn5.txt | 25 --------
.../bindings/net/nfc/samsung,s3fwrn5.yaml | 61 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 62 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
create mode 100644 Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
deleted file mode 100644
index f02f6fb7f81c..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Samsung S3FWRN5 NCI NFC Controller
-
-Required properties:
-- compatible: Should be "samsung,s3fwrn5-i2c".
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
-- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
- sleep/wakeup control
-
-Example:
-
-&hsi2c_4 {
- s3fwrn5@27 {
- compatible = "samsung,s3fwrn5-i2c";
-
- reg = <0x27>;
-
- interrupt-parent = <&gpa1>;
- interrupts = <3 0 0>;
-
- s3fwrn5,en-gpios = <&gpf1 4 0>;
- s3fwrn5,fw-gpios = <&gpj0 2 0>;
- };
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
new file mode 100644
index 000000000000..f43d31a2d94b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/samsung,s3fwrn5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3FWRN5 NCI NFC Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Krzysztof Opasiak <k.opasiak@samsung.com>
+
+properties:
+ compatible:
+ const: samsung,s3fwrn5-i2c
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ s3fwrn5,en-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used for enabling/disabling the chip
+
+ s3fwrn5,fw-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used to enter firmware mode and sleep/wakeup control
+
+additionalProperties: false
+
+required:
+ - compatible
+ - interrupts
+ - reg
+ - s3fwrn5,en-gpios
+ - s3fwrn5,fw-gpios
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ s3fwrn5@27 {
+ compatible = "samsung,s3fwrn5-i2c";
+ reg = <0x27>;
+
+ interrupt-parent = <&gpa1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+
+ s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+ s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index ac79fdbdf8d0..ec4f1d9cb3dc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15273,6 +15273,7 @@ M: Robert Baldyga <r.baldyga@samsung.com>
M: Krzysztof Opasiak <k.opasiak@samsung.com>
L: linux-nfc@lists.01.org (moderated for non-subscribers)
S: Supported
+F: Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
F: drivers/nfc/s3fwrn5
SAMSUNG S5C73M3 CAMERA DRIVER
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: linux-nfc@lists.01.org
Subject: [PATCH v3 1/8] dt-bindings: net: nfc: s3fwrn5: Convert to dtschema
Date: Thu, 10 Sep 2020 18:12:12 +0200 [thread overview]
Message-ID: <20200910161219.6237-2-krzk@kernel.org> (raw)
In-Reply-To: <20200910161219.6237-1-krzk@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 3758 bytes --]
Convert the Samsung S3FWRN5 NCI NFC controller bindings to dtschema.
This is conversion only so it includes properties with invalid prefixes
(s3fwrn5,en-gpios) which should be addressed later.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../devicetree/bindings/net/nfc/s3fwrn5.txt | 25 --------
.../bindings/net/nfc/samsung,s3fwrn5.yaml | 61 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 62 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
create mode 100644 Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
deleted file mode 100644
index f02f6fb7f81c..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Samsung S3FWRN5 NCI NFC Controller
-
-Required properties:
-- compatible: Should be "samsung,s3fwrn5-i2c".
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
-- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
- sleep/wakeup control
-
-Example:
-
-&hsi2c_4 {
- s3fwrn5(a)27 {
- compatible = "samsung,s3fwrn5-i2c";
-
- reg = <0x27>;
-
- interrupt-parent = <&gpa1>;
- interrupts = <3 0 0>;
-
- s3fwrn5,en-gpios = <&gpf1 4 0>;
- s3fwrn5,fw-gpios = <&gpj0 2 0>;
- };
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
new file mode 100644
index 000000000000..f43d31a2d94b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/samsung,s3fwrn5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3FWRN5 NCI NFC Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Krzysztof Opasiak <k.opasiak@samsung.com>
+
+properties:
+ compatible:
+ const: samsung,s3fwrn5-i2c
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ s3fwrn5,en-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used for enabling/disabling the chip
+
+ s3fwrn5,fw-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used to enter firmware mode and sleep/wakeup control
+
+additionalProperties: false
+
+required:
+ - compatible
+ - interrupts
+ - reg
+ - s3fwrn5,en-gpios
+ - s3fwrn5,fw-gpios
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ s3fwrn5(a)27 {
+ compatible = "samsung,s3fwrn5-i2c";
+ reg = <0x27>;
+
+ interrupt-parent = <&gpa1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+
+ s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+ s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index ac79fdbdf8d0..ec4f1d9cb3dc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15273,6 +15273,7 @@ M: Robert Baldyga <r.baldyga@samsung.com>
M: Krzysztof Opasiak <k.opasiak@samsung.com>
L: linux-nfc(a)lists.01.org (moderated for non-subscribers)
S: Supported
+F: Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
F: drivers/nfc/s3fwrn5
SAMSUNG S5C73M3 CAMERA DRIVER
--
2.17.1
next prev parent reply other threads:[~2020-09-10 18:47 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-10 16:12 [PATCH v3 0/8] nfc: s3fwrn5: Few cleanups Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` [linux-nfc] " Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski [this message]
2020-09-10 16:12 ` [PATCH v3 1/8] dt-bindings: net: nfc: s3fwrn5: Convert to dtschema Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` [linux-nfc] " Krzysztof Kozlowski
2020-09-10 16:12 ` [PATCH v3 2/8] dt-bindings: net: nfc: s3fwrn5: Remove wrong vendor prefix from GPIOs Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` [linux-nfc] " Krzysztof Kozlowski
2020-09-10 16:12 ` [PATCH v3 3/8] " Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` [linux-nfc] " Krzysztof Kozlowski
2020-09-10 16:12 ` [PATCH v3 4/8] nfc: s3fwrn5: Remove unneeded 'ret' variable Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` [linux-nfc] " Krzysztof Kozlowski
2020-09-10 16:12 ` [PATCH v3 5/8] nfc: s3fwrn5: Add missing CRYPTO_HASH dependency Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` [linux-nfc] " Krzysztof Kozlowski
2020-09-10 16:12 ` [PATCH v3 6/8] nfc: s3fwrn5: Constify s3fwrn5_fw_info when not modified Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` [linux-nfc] " Krzysztof Kozlowski
2020-09-10 16:12 ` [PATCH v3 7/8] MAINTAINERS: Add Krzysztof Kozlowski to Samsung S3FWRN5 and remove Robert Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` [linux-nfc] " Krzysztof Kozlowski
2020-09-10 16:12 ` [PATCH v3 8/8] arm64: dts: exynos: Use newer S3FWRN5 GPIO properties in Exynos5433 TM2 Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski
2020-09-10 16:12 ` [linux-nfc] " Krzysztof Kozlowski
2020-09-10 22:22 ` [PATCH v3 0/8] nfc: s3fwrn5: Few cleanups David Miller
2020-09-10 22:22 ` David Miller
2020-09-11 6:08 ` Krzysztof Kozlowski
2020-09-11 6:08 ` Krzysztof Kozlowski
2020-09-11 6:08 ` Krzysztof Kozlowski
2020-09-11 6:08 ` [linux-nfc] " Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200910161219.6237-2-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=k.opasiak@samsung.com \
--cc=kgene@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nfc@lists.01.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.