From: Jim Quinlan <james.quinlan@broadcom.com> To: linux-pci@vger.kernel.org, Nicolas Saenz Julienne <nsaenzjulienne@suse.de>, Christoph Hellwig <hch@lst.de>, Robin Murphy <robin.murphy@arm.com>, bcm-kernel-feedback-list@broadcom.com, james.quinlan@broadcom.com Cc: Jim Quinlan <jquinlan@broadcom.com>, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>, Rob Herring <robh@kernel.org>, Bjorn Helgaas <bhelgaas@google.com>, Florian Fainelli <f.fainelli@gmail.com>, Philipp Zabel <p.zabel@pengutronix.de>, linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE), linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v12 05/10] PCI: brcmstb: Add bcm7278 PERST# support Date: Fri, 11 Sep 2020 13:52:25 -0400 [thread overview] Message-ID: <20200911175232.19016-6-james.quinlan@broadcom.com> (raw) In-Reply-To: <20200911175232.19016-1-james.quinlan@broadcom.com> [-- Attachment #1: Type: text/plain, Size: 8302 bytes --] From: Jim Quinlan <jquinlan@broadcom.com> The PERST# bit was moved to a different register in 7278-type STB chips. In addition, the polarity of the bit was also changed; for other chips writing a 1 specified assert; for 7278-type chips, writing a 0 specifies assert. Of course, PERST# is a PCIe asserted-low signal. While we are here, also change the bridge_sw_init_set() functions so like the perst_set() functions they are chip specific and we no longer rely on data wrt chip specific field mask and shift values. Signed-off-by: Jim Quinlan <jquinlan@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/pci/controller/pcie-brcmstb.c | 97 +++++++++++++++++++-------- 1 file changed, 69 insertions(+), 28 deletions(-) diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 7f5e7848df47..947cf3115eb0 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -83,6 +83,7 @@ #define PCIE_MISC_PCIE_CTRL 0x4064 #define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1 +#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK 0x4 #define PCIE_MISC_PCIE_STATUS 0x4068 #define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80 @@ -125,6 +126,11 @@ #define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1 #define PCIE_RGR1_SW_INIT_1_PERST_SHIFT 0x0 +#define RGR1_SW_INIT_1_INIT_GENERIC_MASK 0x2 +#define RGR1_SW_INIT_1_INIT_GENERIC_SHIFT 0x1 +#define RGR1_SW_INIT_1_INIT_7278_MASK 0x1 +#define RGR1_SW_INIT_1_INIT_7278_SHIFT 0x0 + /* PCIe parameters */ #define BRCM_NUM_PCIE_OUT_WINS 0x4 #define BRCM_INT_PCI_MSI_NR 32 @@ -157,6 +163,23 @@ #define DATA_ADDR(pcie) (pcie->reg_offsets[EXT_CFG_DATA]) #define PCIE_RGR1_SW_INIT_1(pcie) (pcie->reg_offsets[RGR1_SW_INIT_1]) +/* Rescal registers */ +#define PCIE_DVT_PMU_PCIE_PHY_CTRL 0xc700 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS 0x3 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK 0x4 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT 0x2 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK 0x2 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT 0x1 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK 0x1 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT 0x0 + +/* Forward declarations */ +struct brcm_pcie; +static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val); +static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val); +static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val); +static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val); + enum { RGR1_SW_INIT_1, EXT_CFG_INDEX, @@ -175,19 +198,10 @@ enum pcie_type { }; struct pcie_cfg_data { - const int *reg_field_info; const int *offsets; const enum pcie_type type; -}; - -static const int pcie_reg_field_info[] = { - [RGR1_SW_INIT_1_INIT_MASK] = 0x2, - [RGR1_SW_INIT_1_INIT_SHIFT] = 0x1, -}; - -static const int pcie_reg_field_info_bcm7278[] = { - [RGR1_SW_INIT_1_INIT_MASK] = 0x1, - [RGR1_SW_INIT_1_INIT_SHIFT] = 0x0, + void (*perst_set)(struct brcm_pcie *pcie, u32 val); + void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val); }; static const int pcie_offsets[] = { @@ -197,9 +211,10 @@ static const int pcie_offsets[] = { }; static const struct pcie_cfg_data generic_cfg = { - .reg_field_info = pcie_reg_field_info, .offsets = pcie_offsets, .type = GENERIC, + .perst_set = brcm_pcie_perst_set_generic, + .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, }; static const int pcie_offset_bcm7278[] = { @@ -209,15 +224,17 @@ static const int pcie_offset_bcm7278[] = { }; static const struct pcie_cfg_data bcm7278_cfg = { - .reg_field_info = pcie_reg_field_info_bcm7278, .offsets = pcie_offset_bcm7278, .type = BCM7278, + .perst_set = brcm_pcie_perst_set_7278, + .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278, }; static const struct pcie_cfg_data bcm2711_cfg = { - .reg_field_info = pcie_reg_field_info, .offsets = pcie_offsets, .type = BCM2711, + .perst_set = brcm_pcie_perst_set_generic, + .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, }; struct brcm_msi { @@ -244,8 +261,13 @@ struct brcm_pcie { u64 msi_target_addr; struct brcm_msi *msi; const int *reg_offsets; - const int *reg_field_info; enum pcie_type type; + struct reset_control *rescal; + int num_memc; + u64 memc_size[PCIE_BRCM_MAX_MEMC]; + u32 hw_rev; + void (*perst_set)(struct brcm_pcie *pcie, u32 val); + void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val); }; /* @@ -670,17 +692,37 @@ static struct pci_ops brcm_pcie_ops = { .write = pci_generic_config_write, }; -static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, u32 val) +static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val) { - u32 tmp, mask = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_MASK]; - u32 shift = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_SHIFT]; + u32 tmp, mask = RGR1_SW_INIT_1_INIT_GENERIC_MASK; + u32 shift = RGR1_SW_INIT_1_INIT_GENERIC_SHIFT; tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); tmp = (tmp & ~mask) | ((val << shift) & mask); writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); } -static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, u32 val) +static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val) +{ + u32 tmp, mask = RGR1_SW_INIT_1_INIT_7278_MASK; + u32 shift = RGR1_SW_INIT_1_INIT_7278_SHIFT; + + tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); + tmp = (tmp & ~mask) | ((val << shift) & mask); + writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); +} + +static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val) +{ + u32 tmp; + + /* Perst bit has moved and assert value is 0 */ + tmp = readl(pcie->base + PCIE_MISC_PCIE_CTRL); + u32p_replace_bits(&tmp, !val, PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK); + writel(tmp, pcie->base + PCIE_MISC_PCIE_CTRL); +} + +static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val) { u32 tmp; @@ -770,13 +812,11 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) u32 tmp, aspm_support; /* Reset the bridge */ - brcm_pcie_bridge_sw_init_set(pcie, 1); - brcm_pcie_perst_set(pcie, 1); - + pcie->bridge_sw_init_set(pcie, 1); usleep_range(100, 200); /* Take the bridge out of reset */ - brcm_pcie_bridge_sw_init_set(pcie, 0); + pcie->bridge_sw_init_set(pcie, 0); tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK; @@ -842,7 +882,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) brcm_pcie_set_gen(pcie, pcie->gen); /* Unassert the fundamental reset */ - brcm_pcie_perst_set(pcie, 0); + pcie->perst_set(pcie, 0); /* * Give the RC/EP time to wake up, before trying to configure RC. @@ -962,7 +1002,7 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie) if (brcm_pcie_link_up(pcie)) brcm_pcie_enter_l23(pcie); /* Assert fundamental reset */ - brcm_pcie_perst_set(pcie, 1); + pcie->perst_set(pcie, 1); /* Deassert request for L23 in case it was asserted */ tmp = readl(base + PCIE_MISC_PCIE_CTRL); @@ -975,7 +1015,7 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie) writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); /* Shutdown PCIe bridge */ - brcm_pcie_bridge_sw_init_set(pcie, 1); + pcie->bridge_sw_init_set(pcie, 1); } static int brcm_pcie_suspend(struct device *dev) @@ -999,7 +1039,7 @@ static int brcm_pcie_resume(struct device *dev) clk_prepare_enable(pcie->clk); /* Take bridge out of reset so we can access the SERDES reg */ - brcm_pcie_bridge_sw_init_set(pcie, 0); + pcie->bridge_sw_init_set(pcie, 0); /* SERDES_IDDQ = 0 */ tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); @@ -1080,8 +1120,9 @@ static int brcm_pcie_probe(struct platform_device *pdev) pcie->dev = &pdev->dev; pcie->np = np; pcie->reg_offsets = data->offsets; - pcie->reg_field_info = data->reg_field_info; pcie->type = data->type; + pcie->perst_set = data->perst_set; + pcie->bridge_sw_init_set = data->bridge_sw_init_set; pcie->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(pcie->base)) -- 2.17.1 [-- Attachment #2: S/MIME Cryptographic Signature --] [-- Type: application/pkcs7-signature, Size: 4167 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Jim Quinlan <james.quinlan@broadcom.com> To: linux-pci@vger.kernel.org, Nicolas Saenz Julienne <nsaenzjulienne@suse.de>, Christoph Hellwig <hch@lst.de>, Robin Murphy <robin.murphy@arm.com>, bcm-kernel-feedback-list@broadcom.com, james.quinlan@broadcom.com Cc: Rob Herring <robh@kernel.org>, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>, open list <linux-kernel@vger.kernel.org>, Florian Fainelli <f.fainelli@gmail.com>, "moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" <linux-rpi-kernel@lists.infradead.org>, Philipp Zabel <p.zabel@pengutronix.de>, Bjorn Helgaas <bhelgaas@google.com>, Jim Quinlan <jquinlan@broadcom.com>, "moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" <linux-arm-kernel@lists.infradead.org> Subject: [PATCH v12 05/10] PCI: brcmstb: Add bcm7278 PERST# support Date: Fri, 11 Sep 2020 13:52:25 -0400 [thread overview] Message-ID: <20200911175232.19016-6-james.quinlan@broadcom.com> (raw) In-Reply-To: <20200911175232.19016-1-james.quinlan@broadcom.com> [-- Attachment #1.1: Type: text/plain, Size: 8302 bytes --] From: Jim Quinlan <jquinlan@broadcom.com> The PERST# bit was moved to a different register in 7278-type STB chips. In addition, the polarity of the bit was also changed; for other chips writing a 1 specified assert; for 7278-type chips, writing a 0 specifies assert. Of course, PERST# is a PCIe asserted-low signal. While we are here, also change the bridge_sw_init_set() functions so like the perst_set() functions they are chip specific and we no longer rely on data wrt chip specific field mask and shift values. Signed-off-by: Jim Quinlan <jquinlan@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/pci/controller/pcie-brcmstb.c | 97 +++++++++++++++++++-------- 1 file changed, 69 insertions(+), 28 deletions(-) diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 7f5e7848df47..947cf3115eb0 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -83,6 +83,7 @@ #define PCIE_MISC_PCIE_CTRL 0x4064 #define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1 +#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK 0x4 #define PCIE_MISC_PCIE_STATUS 0x4068 #define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80 @@ -125,6 +126,11 @@ #define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1 #define PCIE_RGR1_SW_INIT_1_PERST_SHIFT 0x0 +#define RGR1_SW_INIT_1_INIT_GENERIC_MASK 0x2 +#define RGR1_SW_INIT_1_INIT_GENERIC_SHIFT 0x1 +#define RGR1_SW_INIT_1_INIT_7278_MASK 0x1 +#define RGR1_SW_INIT_1_INIT_7278_SHIFT 0x0 + /* PCIe parameters */ #define BRCM_NUM_PCIE_OUT_WINS 0x4 #define BRCM_INT_PCI_MSI_NR 32 @@ -157,6 +163,23 @@ #define DATA_ADDR(pcie) (pcie->reg_offsets[EXT_CFG_DATA]) #define PCIE_RGR1_SW_INIT_1(pcie) (pcie->reg_offsets[RGR1_SW_INIT_1]) +/* Rescal registers */ +#define PCIE_DVT_PMU_PCIE_PHY_CTRL 0xc700 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS 0x3 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK 0x4 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT 0x2 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK 0x2 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT 0x1 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK 0x1 +#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT 0x0 + +/* Forward declarations */ +struct brcm_pcie; +static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val); +static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val); +static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val); +static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val); + enum { RGR1_SW_INIT_1, EXT_CFG_INDEX, @@ -175,19 +198,10 @@ enum pcie_type { }; struct pcie_cfg_data { - const int *reg_field_info; const int *offsets; const enum pcie_type type; -}; - -static const int pcie_reg_field_info[] = { - [RGR1_SW_INIT_1_INIT_MASK] = 0x2, - [RGR1_SW_INIT_1_INIT_SHIFT] = 0x1, -}; - -static const int pcie_reg_field_info_bcm7278[] = { - [RGR1_SW_INIT_1_INIT_MASK] = 0x1, - [RGR1_SW_INIT_1_INIT_SHIFT] = 0x0, + void (*perst_set)(struct brcm_pcie *pcie, u32 val); + void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val); }; static const int pcie_offsets[] = { @@ -197,9 +211,10 @@ static const int pcie_offsets[] = { }; static const struct pcie_cfg_data generic_cfg = { - .reg_field_info = pcie_reg_field_info, .offsets = pcie_offsets, .type = GENERIC, + .perst_set = brcm_pcie_perst_set_generic, + .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, }; static const int pcie_offset_bcm7278[] = { @@ -209,15 +224,17 @@ static const int pcie_offset_bcm7278[] = { }; static const struct pcie_cfg_data bcm7278_cfg = { - .reg_field_info = pcie_reg_field_info_bcm7278, .offsets = pcie_offset_bcm7278, .type = BCM7278, + .perst_set = brcm_pcie_perst_set_7278, + .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278, }; static const struct pcie_cfg_data bcm2711_cfg = { - .reg_field_info = pcie_reg_field_info, .offsets = pcie_offsets, .type = BCM2711, + .perst_set = brcm_pcie_perst_set_generic, + .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, }; struct brcm_msi { @@ -244,8 +261,13 @@ struct brcm_pcie { u64 msi_target_addr; struct brcm_msi *msi; const int *reg_offsets; - const int *reg_field_info; enum pcie_type type; + struct reset_control *rescal; + int num_memc; + u64 memc_size[PCIE_BRCM_MAX_MEMC]; + u32 hw_rev; + void (*perst_set)(struct brcm_pcie *pcie, u32 val); + void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val); }; /* @@ -670,17 +692,37 @@ static struct pci_ops brcm_pcie_ops = { .write = pci_generic_config_write, }; -static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, u32 val) +static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val) { - u32 tmp, mask = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_MASK]; - u32 shift = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_SHIFT]; + u32 tmp, mask = RGR1_SW_INIT_1_INIT_GENERIC_MASK; + u32 shift = RGR1_SW_INIT_1_INIT_GENERIC_SHIFT; tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); tmp = (tmp & ~mask) | ((val << shift) & mask); writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); } -static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, u32 val) +static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val) +{ + u32 tmp, mask = RGR1_SW_INIT_1_INIT_7278_MASK; + u32 shift = RGR1_SW_INIT_1_INIT_7278_SHIFT; + + tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); + tmp = (tmp & ~mask) | ((val << shift) & mask); + writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); +} + +static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val) +{ + u32 tmp; + + /* Perst bit has moved and assert value is 0 */ + tmp = readl(pcie->base + PCIE_MISC_PCIE_CTRL); + u32p_replace_bits(&tmp, !val, PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK); + writel(tmp, pcie->base + PCIE_MISC_PCIE_CTRL); +} + +static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val) { u32 tmp; @@ -770,13 +812,11 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) u32 tmp, aspm_support; /* Reset the bridge */ - brcm_pcie_bridge_sw_init_set(pcie, 1); - brcm_pcie_perst_set(pcie, 1); - + pcie->bridge_sw_init_set(pcie, 1); usleep_range(100, 200); /* Take the bridge out of reset */ - brcm_pcie_bridge_sw_init_set(pcie, 0); + pcie->bridge_sw_init_set(pcie, 0); tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK; @@ -842,7 +882,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) brcm_pcie_set_gen(pcie, pcie->gen); /* Unassert the fundamental reset */ - brcm_pcie_perst_set(pcie, 0); + pcie->perst_set(pcie, 0); /* * Give the RC/EP time to wake up, before trying to configure RC. @@ -962,7 +1002,7 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie) if (brcm_pcie_link_up(pcie)) brcm_pcie_enter_l23(pcie); /* Assert fundamental reset */ - brcm_pcie_perst_set(pcie, 1); + pcie->perst_set(pcie, 1); /* Deassert request for L23 in case it was asserted */ tmp = readl(base + PCIE_MISC_PCIE_CTRL); @@ -975,7 +1015,7 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie) writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); /* Shutdown PCIe bridge */ - brcm_pcie_bridge_sw_init_set(pcie, 1); + pcie->bridge_sw_init_set(pcie, 1); } static int brcm_pcie_suspend(struct device *dev) @@ -999,7 +1039,7 @@ static int brcm_pcie_resume(struct device *dev) clk_prepare_enable(pcie->clk); /* Take bridge out of reset so we can access the SERDES reg */ - brcm_pcie_bridge_sw_init_set(pcie, 0); + pcie->bridge_sw_init_set(pcie, 0); /* SERDES_IDDQ = 0 */ tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); @@ -1080,8 +1120,9 @@ static int brcm_pcie_probe(struct platform_device *pdev) pcie->dev = &pdev->dev; pcie->np = np; pcie->reg_offsets = data->offsets; - pcie->reg_field_info = data->reg_field_info; pcie->type = data->type; + pcie->perst_set = data->perst_set; + pcie->bridge_sw_init_set = data->bridge_sw_init_set; pcie->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(pcie->base)) -- 2.17.1 [-- Attachment #1.2: S/MIME Cryptographic Signature --] [-- Type: application/pkcs7-signature, Size: 4167 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-11 17:53 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-11 17:52 [PATCH v12 00/10] PCI: brcmstb: enable PCIe for STB chips Jim Quinlan 2020-09-11 17:52 ` Jim Quinlan 2020-09-11 17:52 ` Jim Quinlan 2020-09-11 17:52 ` [PATCH v12 01/10] PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB Jim Quinlan 2020-09-11 17:52 ` [PATCH v12 02/10] dt-bindings: PCI: Add bindings for more Brcmstb chips Jim Quinlan 2020-09-11 17:52 ` Jim Quinlan 2020-09-11 17:52 ` [PATCH v12 03/10] PCI: brcmstb: Add bcm7278 register info Jim Quinlan 2020-09-11 17:52 ` Jim Quinlan 2020-09-11 17:52 ` [PATCH v12 04/10] PCI: brcmstb: Add suspend and resume pm_ops Jim Quinlan 2020-09-11 17:52 ` Jim Quinlan 2020-09-16 15:24 ` Rob Herring 2020-09-16 15:24 ` Rob Herring 2020-09-11 17:52 ` Jim Quinlan [this message] 2020-09-11 17:52 ` [PATCH v12 05/10] PCI: brcmstb: Add bcm7278 PERST# support Jim Quinlan 2020-09-16 15:24 ` Rob Herring 2020-09-16 15:24 ` Rob Herring 2020-09-11 17:52 ` [PATCH v12 06/10] PCI: brcmstb: Add control of rescal reset Jim Quinlan 2020-09-11 17:52 ` Jim Quinlan 2020-09-16 15:26 ` Rob Herring 2020-09-16 15:26 ` Rob Herring 2020-09-11 17:52 ` [PATCH v12 07/10] PCI: brcmstb: Set additional internal memory DMA viewport sizes Jim Quinlan 2020-09-11 17:52 ` Jim Quinlan 2020-09-11 17:52 ` [PATCH v12 08/10] PCI: brcmstb: Accommodate MSI for older chips Jim Quinlan 2020-09-11 17:52 ` Jim Quinlan 2020-09-11 17:52 ` [PATCH v12 09/10] PCI: brcmstb: Set bus max burst size by chip type Jim Quinlan 2020-09-11 17:52 ` Jim Quinlan 2020-09-11 17:52 ` [PATCH v12 10/10] PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list Jim Quinlan 2020-09-11 17:52 ` Jim Quinlan 2020-09-17 12:08 ` [PATCH v12 00/10] PCI: brcmstb: enable PCIe for STB chips Lorenzo Pieralisi 2020-09-17 12:08 ` Lorenzo Pieralisi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200911175232.19016-6-james.quinlan@broadcom.com \ --to=james.quinlan@broadcom.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=bhelgaas@google.com \ --cc=f.fainelli@gmail.com \ --cc=hch@lst.de \ --cc=jquinlan@broadcom.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=lorenzo.pieralisi@arm.com \ --cc=nsaenzjulienne@suse.de \ --cc=p.zabel@pengutronix.de \ --cc=robh@kernel.org \ --cc=robin.murphy@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.