From: Michael Walle <michael@walle.cc> To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: "Linus Walleij" <linus.walleij@linaro.org>, "Bartosz Golaszewski" <bgolaszewski@baylibre.com>, "Rob Herring" <robh+dt@kernel.org>, "Jean Delvare" <jdelvare@suse.com>, "Guenter Roeck" <linux@roeck-us.net>, "Lee Jones" <lee.jones@linaro.org>, "Thierry Reding" <thierry.reding@gmail.com>, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, "Wim Van Sebroeck" <wim@linux-watchdog.org>, "Shawn Guo" <shawnguo@kernel.org>, "Li Yang" <leoyang.li@nxp.com>, "Thomas Gleixner" <tglx@linutronix.de>, "Jason Cooper" <jason@lakedaemon.net>, "Marc Zyngier" <maz@kernel.org>, "Mark Brown" <broonie@kernel.org>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, "Andy Shevchenko" <andriy.shevchenko@linux.intel.com>, "Catalin Marinas" <catalin.marinas@arm.com>, "Will Deacon" <will@kernel.org>, "Pavel Machek" <pavel@ucw.cz>, "Michael Walle" <michael@walle.cc> Subject: [PATCH v10 09/13] arm64: dts: freescale: sl28: enable sl28cpld Date: Mon, 14 Sep 2020 23:43:37 +0200 [thread overview] Message-ID: <20200914214341.14268-10-michael@walle.cc> (raw) In-Reply-To: <20200914214341.14268-1-michael@walle.cc> Add the board management controller node. Signed-off-by: Michael Walle <michael@walle.cc> --- Changes since v9: - none Changes since v8: - none Changes since v7: - none Changes since v6: - renamed "sl28cpld-r1" to "sl28cpld" - moved "reg" and "compatible" properties to the top of a node Changes since v5: - none Changes since v4: - none Changes since v3: - see cover letter .../freescale/fsl-ls1028a-kontron-sl28.dts | 102 ++++++++++++++++++ 1 file changed, 102 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 852dad8d70ab..5fdf4ec8b39f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "fsl-ls1028a.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Kontron SMARC-sAL28"; @@ -166,6 +167,107 @@ reg = <0x32>; }; + sl28cpld@4a { + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + #address-cells = <1>; + #size-cells = <0>; + + watchdog@4 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0x4>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@b { + compatible = "kontron,sl28cpld-fan"; + reg = <0xb>; + }; + + sl28cpld_pwm0: pwm@c { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xc>; + #pwm-cells = <2>; + }; + + sl28cpld_pwm1: pwm@e { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xe>; + #pwm-cells = <2>; + }; + + sl28cpld_gpio0: gpio@10 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x10>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N", + "GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N", + "GPIO4_HDA_RST_N", "GPIO5_PWM_OUT", + "GPIO6_TACHIN", "GPIO7"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio1: gpio@15 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x15>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO8", "GPIO9", "GPIO10", "GPIO11", + "", "", "", ""; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio2: gpio@1a { + compatible = "kontron,sl28cpld-gpo"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "LCD0 voltage enable", + "LCD0 backlight enable", + "eMMC reset", "LVDS bridge reset", + "LVDS bridge power-down", + "SDIO power enable", + "", ""; + }; + + sl28cpld_gpio3: gpio@1b { + compatible = "kontron,sl28cpld-gpi"; + reg = <0x1b>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "Power button", "Force recovery", "Sleep", + "Battery low", "Lid state", "Charging", + "Charger present", ""; + }; + + sl28cpld_intc: interrupt-controller@1c { + compatible = "kontron,sl28cpld-intc"; + reg = <0x1c>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + eeprom@50 { compatible = "atmel,24c32"; reg = <0x50>; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Michael Walle <michael@walle.cc> To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: "Marc Zyngier" <maz@kernel.org>, "Jean Delvare" <jdelvare@suse.com>, "Catalin Marinas" <catalin.marinas@arm.com>, "Jason Cooper" <jason@lakedaemon.net>, "Will Deacon" <will@kernel.org>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, "Shawn Guo" <shawnguo@kernel.org>, "Linus Walleij" <linus.walleij@linaro.org>, "Andy Shevchenko" <andriy.shevchenko@linux.intel.com>, "Li Yang" <leoyang.li@nxp.com>, "Bartosz Golaszewski" <bgolaszewski@baylibre.com>, "Michael Walle" <michael@walle.cc>, "Rob Herring" <robh+dt@kernel.org>, "Thierry Reding" <thierry.reding@gmail.com>, "Mark Brown" <broonie@kernel.org>, "Pavel Machek" <pavel@ucw.cz>, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, "Thomas Gleixner" <tglx@linutronix.de>, "Wim Van Sebroeck" <wim@linux-watchdog.org>, "Lee Jones" <lee.jones@linaro.org>, "Guenter Roeck" <linux@roeck-us.net> Subject: [PATCH v10 09/13] arm64: dts: freescale: sl28: enable sl28cpld Date: Mon, 14 Sep 2020 23:43:37 +0200 [thread overview] Message-ID: <20200914214341.14268-10-michael@walle.cc> (raw) In-Reply-To: <20200914214341.14268-1-michael@walle.cc> Add the board management controller node. Signed-off-by: Michael Walle <michael@walle.cc> --- Changes since v9: - none Changes since v8: - none Changes since v7: - none Changes since v6: - renamed "sl28cpld-r1" to "sl28cpld" - moved "reg" and "compatible" properties to the top of a node Changes since v5: - none Changes since v4: - none Changes since v3: - see cover letter .../freescale/fsl-ls1028a-kontron-sl28.dts | 102 ++++++++++++++++++ 1 file changed, 102 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 852dad8d70ab..5fdf4ec8b39f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "fsl-ls1028a.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Kontron SMARC-sAL28"; @@ -166,6 +167,107 @@ reg = <0x32>; }; + sl28cpld@4a { + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + #address-cells = <1>; + #size-cells = <0>; + + watchdog@4 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0x4>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@b { + compatible = "kontron,sl28cpld-fan"; + reg = <0xb>; + }; + + sl28cpld_pwm0: pwm@c { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xc>; + #pwm-cells = <2>; + }; + + sl28cpld_pwm1: pwm@e { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xe>; + #pwm-cells = <2>; + }; + + sl28cpld_gpio0: gpio@10 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x10>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N", + "GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N", + "GPIO4_HDA_RST_N", "GPIO5_PWM_OUT", + "GPIO6_TACHIN", "GPIO7"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio1: gpio@15 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x15>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO8", "GPIO9", "GPIO10", "GPIO11", + "", "", "", ""; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio2: gpio@1a { + compatible = "kontron,sl28cpld-gpo"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "LCD0 voltage enable", + "LCD0 backlight enable", + "eMMC reset", "LVDS bridge reset", + "LVDS bridge power-down", + "SDIO power enable", + "", ""; + }; + + sl28cpld_gpio3: gpio@1b { + compatible = "kontron,sl28cpld-gpi"; + reg = <0x1b>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "Power button", "Force recovery", "Sleep", + "Battery low", "Lid state", "Charging", + "Charger present", ""; + }; + + sl28cpld_intc: interrupt-controller@1c { + compatible = "kontron,sl28cpld-intc"; + reg = <0x1c>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + eeprom@50 { compatible = "atmel,24c32"; reg = <0x50>; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-14 21:44 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-14 21:43 [PATCH v10 00/13] Add support for Kontron sl28cpld Michael Walle 2020-09-14 21:43 ` Michael Walle 2020-09-14 21:43 ` [PATCH v10 01/13] mfd: add simple regmap based I2C driver Michael Walle 2020-09-14 21:43 ` Michael Walle 2020-09-14 21:43 ` [PATCH v10 02/13] dt-bindings: mfd: Add bindings for sl28cpld Michael Walle 2020-09-14 21:43 ` Michael Walle 2020-09-14 21:43 ` [PATCH v10 03/13] mfd: simple-mfd-i2c: add sl28cpld support Michael Walle 2020-09-14 21:43 ` Michael Walle 2020-09-14 21:43 ` [PATCH v10 04/13] irqchip: add sl28cpld interrupt controller support Michael Walle 2020-09-14 21:43 ` Michael Walle 2020-09-14 21:43 ` [PATCH v10 05/13] watchdog: add support for sl28cpld watchdog Michael Walle 2020-09-14 21:43 ` Michael Walle 2020-09-14 21:43 ` [PATCH v10 06/13] pwm: add support for sl28cpld PWM controller Michael Walle 2020-09-14 21:43 ` Michael Walle 2020-09-15 9:06 ` Lee Jones 2020-09-15 9:06 ` Lee Jones 2020-09-15 21:03 ` Uwe Kleine-König 2020-09-15 21:03 ` Uwe Kleine-König 2020-09-14 21:43 ` [PATCH v10 07/13] gpio: add support for the sl28cpld GPIO controller Michael Walle 2020-09-14 21:43 ` Michael Walle 2020-09-14 21:43 ` [PATCH v10 08/13] hwmon: add support for the sl28cpld hardware monitoring controller Michael Walle 2020-09-14 21:43 ` Michael Walle 2020-09-14 21:43 ` Michael Walle [this message] 2020-09-14 21:43 ` [PATCH v10 09/13] arm64: dts: freescale: sl28: enable sl28cpld Michael Walle 2020-09-14 21:43 ` [PATCH v10 10/13] arm64: dts: freescale: sl28: map GPIOs to input events Michael Walle 2020-09-14 21:43 ` Michael Walle 2020-09-14 21:43 ` [PATCH v10 11/13] arm64: dts: freescale: sl28: enable LED support Michael Walle 2020-09-14 21:43 ` Michael Walle 2020-09-22 2:59 ` Shawn Guo 2020-09-22 2:59 ` Shawn Guo 2020-09-14 21:43 ` [PATCH v10 12/13] arm64: dts: freescale: sl28: enable fan support Michael Walle 2020-09-14 21:43 ` Michael Walle 2020-09-14 21:43 ` [PATCH v10 13/13] arm64: defconfig: enable the sl28cpld board management controller Michael Walle 2020-09-14 21:43 ` Michael Walle 2020-09-14 21:50 ` [PATCH v10 00/13] Add support for Kontron sl28cpld Michael Walle 2020-09-14 21:50 ` Michael Walle 2020-09-17 19:25 ` [GIT PULL] Immutable branch between MFD, HWMON, GPIO, IRQChip, PWM and Watchdog due for the v5.10 merge window Lee Jones 2020-09-17 19:25 ` Lee Jones
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200914214341.14268-10-michael@walle.cc \ --to=michael@walle.cc \ --cc=andriy.shevchenko@linux.intel.com \ --cc=bgolaszewski@baylibre.com \ --cc=broonie@kernel.org \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=jason@lakedaemon.net \ --cc=jdelvare@suse.com \ --cc=lee.jones@linaro.org \ --cc=leoyang.li@nxp.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-hwmon@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pwm@vger.kernel.org \ --cc=linux-watchdog@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=maz@kernel.org \ --cc=pavel@ucw.cz \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ --cc=tglx@linutronix.de \ --cc=thierry.reding@gmail.com \ --cc=u.kleine-koenig@pengutronix.de \ --cc=will@kernel.org \ --cc=wim@linux-watchdog.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.