All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: linux-can@vger.kernel.org
Cc: kernel@pengutronix.de, Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH 23/37] can: spi: Kconfig: remove unneeded dependencies form Kconfig symbols
Date: Wed, 16 Sep 2020 00:35:13 +0200	[thread overview]
Message-ID: <20200915223527.1417033-24-mkl@pengutronix.de> (raw)
In-Reply-To: <20200915223527.1417033-1-mkl@pengutronix.de>

Since commits

    653ee35ce6d5 ("can: hi311x: remove custom DMA mapped buffer")
    Fixes: df58525df395 ("can: mcp251x: remove custom DMA mapped buffer")

both the hi3111x and the mcp251x driver don't make use of the DMA API
any more. So we can safely remove the HAS_DMA dependency.

While we're here, remove the unneeded CAN_DEV and SPI dependencies from
the CAN_HI311X symbol, as the parent menus already have these
dependencies.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/Kconfig | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/can/spi/Kconfig b/drivers/net/can/spi/Kconfig
index f780c79aac6f..a332008d8495 100644
--- a/drivers/net/can/spi/Kconfig
+++ b/drivers/net/can/spi/Kconfig
@@ -4,13 +4,11 @@ menu "CAN SPI interfaces"
 
 config CAN_HI311X
 	tristate "Holt HI311x SPI CAN controllers"
-	depends on CAN_DEV && SPI && HAS_DMA
 	help
 	  Driver for the Holt HI311x SPI CAN controllers.
 
 config CAN_MCP251X
 	tristate "Microchip MCP251x and MCP25625 SPI CAN controllers"
-	depends on HAS_DMA
 	help
 	  Driver for the Microchip MCP251x and MCP25625 SPI CAN
 	  controllers.
-- 
2.28.0


  parent reply	other threads:[~2020-09-15 22:36 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-15 22:34 [RFC]: can-next 2020-09-16 Marc Kleine-Budde
2020-09-15 22:34 ` [PATCH 01/37] can: grcan: fix spelling mistake "buss" -> "bus" Marc Kleine-Budde
2020-09-15 22:34 ` [PATCH 02/37] can: flexcan: fix spelling mistake "reserverd" -> "reserved" Marc Kleine-Budde
2020-09-15 22:34 ` [PATCH 03/37] can: include: fix spelling mistakes Marc Kleine-Budde
2020-09-15 22:34 ` [PATCH 04/37] can: net: " Marc Kleine-Budde
2020-09-15 22:34 ` [PATCH 05/37] can: drivers: " Marc Kleine-Budde
2020-09-15 22:34 ` [PATCH 06/37] can: raw: fix indention Marc Kleine-Budde
2020-09-15 22:34 ` [PATCH 07/37] can: slcan: update dead link Marc Kleine-Budde
2020-09-15 22:34 ` [PATCH 08/37] can: softing: " Marc Kleine-Budde
2020-09-15 22:34 ` [PATCH 09/37] can: remove "WITH Linux-syscall-note" from SPDX tag of C files Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 10/37] can: dev: can_put_echo_skb(): print number of echo_skb that is occupied Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 11/37] can: dev: can_put_echo_skb(): propagate error in case of errors Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 12/37] can: dev: can_change_state(): print human readable state change messages Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 13/37] can: dev: can_bus_off(): print scheduling of restart if activated Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 14/37] can: c_can: Remove unused inline function Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 15/37] can: mcba_usb: remove redundant initialization of variable err Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 16/37] can: mscan: mark expected switch fall-through Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 17/37] can: ti_hecc: convert to devm_platform_ioremap_resource_byname() Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 18/37] can: peak_usb: convert to use le32_add_cpu() Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 19/37] can: peak_canfd: Remove unused macros Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 20/37] can: pch_can: use generic power management Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 21/37] can: pcan_usb: Document the commands sent to the device Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 22/37] can: pcan_usb: add support of rxerr/txerr counters Marc Kleine-Budde
2020-09-15 22:35 ` Marc Kleine-Budde [this message]
2020-09-15 22:35 ` [PATCH 24/37] dt-bindings: can: mcp251x: change example interrupt type to IRQ_TYPE_LEVEL_LOW Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 25/37] dt-bindings: can: mcp251x: document GPIO support Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 26/37] can: mcp251x: sort include files alphabetically Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 27/37] can: mcp251x: add GPIO support Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 28/37] can: mcp251x: Use readx_poll_timeout() helper Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 29/37] can: mcp251x: add support for half duplex controllers Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 30/37] can: mscan: mpc5xxx_can: update contact email Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 31/37] can: mscan: simplify clock enable/disable Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 32/37] can: rx-offload: can_rx_offload_add_manual(): add new initialization function Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 33/37] dt-binding: can: mcp25xxfd: document device tree bindings Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 34/37] can: mcp25xxfd: add regmap infrastructure Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 35/37] can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 36/37] can: mcp25xxfd: add listen-only mode Marc Kleine-Budde
2020-09-15 22:35 ` [PATCH 37/37] MAINTAINERS: Add entry for Microchip MCP25XXFD SPI-CAN network driver Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200915223527.1417033-24-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=kernel@pengutronix.de \
    --cc=linux-can@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.