All of lore.kernel.org
 help / color / mirror / Atom feed
From: Icenowy Zheng <icenowy@aosc.io>
To: Rob Herring <robh+dt@kernel.org>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH 3/7] ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node
Date: Wed, 23 Sep 2020 08:58:54 +0800	[thread overview]
Message-ID: <20200923005858.148261-2-icenowy@aosc.io> (raw)
In-Reply-To: <20200923005858.148261-1-icenowy@aosc.io>

The CSI1 controller of V3/V3s/S3/S3L chips is used for parallel CSI.

Add the device tree node of it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 4cfdf193cf88..3e079973672d 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -488,6 +488,18 @@ spi0: spi@1c68000 {
 			#size-cells = <0>;
 		};
 
+		csi1: camera@1cb4000 {
+			compatible = "allwinner,sun8i-v3s-csi";
+			reg = <0x01cb4000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI1_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
-- 
2.27.0

WARNING: multiple messages have this Message-ID (diff)
From: Icenowy Zheng <icenowy@aosc.io>
To: Rob Herring <robh+dt@kernel.org>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>
Cc: devicetree@vger.kernel.org, linux-sunxi@googlegroups.com,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH 3/7] ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node
Date: Wed, 23 Sep 2020 08:58:54 +0800	[thread overview]
Message-ID: <20200923005858.148261-2-icenowy@aosc.io> (raw)
In-Reply-To: <20200923005858.148261-1-icenowy@aosc.io>

The CSI1 controller of V3/V3s/S3/S3L chips is used for parallel CSI.

Add the device tree node of it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 4cfdf193cf88..3e079973672d 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -488,6 +488,18 @@ spi0: spi@1c68000 {
 			#size-cells = <0>;
 		};
 
+		csi1: camera@1cb4000 {
+			compatible = "allwinner,sun8i-v3s-csi";
+			reg = <0x01cb4000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI1_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
-- 
2.27.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-09-23  0:59 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-23  0:57 [PATCH 0/7] Pine64 PineCube support Icenowy Zheng
2020-09-23  0:57 ` Icenowy Zheng
2020-09-23  0:57 ` [PATCH 1/7] ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support Icenowy Zheng
2020-09-23  0:57   ` Icenowy Zheng
2020-09-23  0:58 ` [PATCH 2/7] ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX Icenowy Zheng
2020-09-23  0:58   ` Icenowy Zheng
2020-09-23  0:58   ` Icenowy Zheng [this message]
2020-09-23  0:58     ` [PATCH 3/7] ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node Icenowy Zheng
2020-09-23  1:00 ` [PATCH 4/7] ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI Icenowy Zheng
2020-09-23  1:00   ` Icenowy Zheng
2020-09-23  1:00   ` [PATCH 5/7] ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank Icenowy Zheng
2020-09-23  1:00     ` Icenowy Zheng
2020-09-23  1:01 ` [PATCH 4/7] ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI Icenowy Zheng
2020-09-23  1:01   ` Icenowy Zheng
2020-09-23  1:02 ` [PATCH 6/7] dt-bindings: arm: sunxi: add Pine64 PineCube binding Icenowy Zheng
2020-09-23  1:02   ` Icenowy Zheng
2020-09-23  1:02   ` [PATCH 7/7] ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera Icenowy Zheng
2020-09-23  1:02     ` Icenowy Zheng
2020-09-25 15:12 ` [PATCH 0/7] Pine64 PineCube support Maxime Ripard
2020-09-25 15:12   ` Maxime Ripard
2020-10-03 10:28   ` [linux-sunxi] " Clément Péron
2020-10-03 10:28     ` Clément Péron
2020-10-03 10:31     ` Clément Péron
2020-10-03 10:31       ` Clément Péron
2020-10-03 10:39     ` Icenowy Zheng
2020-10-03 10:39       ` Icenowy Zheng
2020-10-03 13:37       ` Clément Péron
2020-10-03 13:37         ` Clément Péron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200923005858.148261-2-icenowy@aosc.io \
    --to=icenowy@aosc.io \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.