From: Grygorii Strashko <grygorii.strashko@ti.com> To: Tero Kristo <t-kristo@ti.com>, Rob Herring <robh+dt@kernel.org>, Nishanth Menon <nm@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>, Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, Vignesh Raghavendra <vigneshr@ti.com>, Suman Anna <s-anna@ti.com>, Kishon Vijay Abraham I <kishon@ti.com>, Grygorii Strashko <grygorii.strashko@ti.com> Subject: [PATCH v4 2/4] arm64: dts: ti: k3-j7200-main: add main navss cpts node Date: Thu, 24 Sep 2020 01:09:36 +0300 [thread overview] Message-ID: <20200923220938.30788-3-grygorii.strashko@ti.com> (raw) In-Reply-To: <20200923220938.30788-1-grygorii.strashko@ti.com> Add DT node for Main NAVSS CPTS module. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index a44c3388c1a8..c2a986affb0e 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -129,6 +129,18 @@ <0x0c>; /* RX_UHCHAN */ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ }; + + cpts@310d0000 { + compatible = "ti,j721e-cpts"; + reg = <0x00 0x310d0000 0x00 0x400>; + reg-names = "cpts"; + clocks = <&k3_clks 201 1>; + clock-names = "cpts"; + interrupts-extended = <&main_navss_intr 391>; + interrupt-names = "cpts"; + ti,cpts-periodic-outputs = <6>; + ti,cpts-ext-ts-inputs = <8>; + }; }; main_pmx0: pinctrl@11c000 { -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Grygorii Strashko <grygorii.strashko@ti.com> To: Tero Kristo <t-kristo@ti.com>, Rob Herring <robh+dt@kernel.org>, Nishanth Menon <nm@ti.com> Cc: devicetree@vger.kernel.org, Grygorii Strashko <grygorii.strashko@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Sekhar Nori <nsekhar@ti.com>, linux-kernel@vger.kernel.org, Kishon Vijay Abraham I <kishon@ti.com>, Peter Ujfalusi <peter.ujfalusi@ti.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 2/4] arm64: dts: ti: k3-j7200-main: add main navss cpts node Date: Thu, 24 Sep 2020 01:09:36 +0300 [thread overview] Message-ID: <20200923220938.30788-3-grygorii.strashko@ti.com> (raw) In-Reply-To: <20200923220938.30788-1-grygorii.strashko@ti.com> Add DT node for Main NAVSS CPTS module. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index a44c3388c1a8..c2a986affb0e 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -129,6 +129,18 @@ <0x0c>; /* RX_UHCHAN */ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ }; + + cpts@310d0000 { + compatible = "ti,j721e-cpts"; + reg = <0x00 0x310d0000 0x00 0x400>; + reg-names = "cpts"; + clocks = <&k3_clks 201 1>; + clock-names = "cpts"; + interrupts-extended = <&main_navss_intr 391>; + interrupt-names = "cpts"; + ti,cpts-periodic-outputs = <6>; + ti,cpts-ext-ts-inputs = <8>; + }; }; main_pmx0: pinctrl@11c000 { -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-23 22:10 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-23 22:09 [PATCH v4 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw Grygorii Strashko 2020-09-23 22:09 ` Grygorii Strashko 2020-09-23 22:09 ` [PATCH v4 1/4] arm64: dts: ti: k3-j7200: add DMA support Grygorii Strashko 2020-09-23 22:09 ` Grygorii Strashko 2020-09-23 22:09 ` Grygorii Strashko [this message] 2020-09-23 22:09 ` [PATCH v4 2/4] arm64: dts: ti: k3-j7200-main: add main navss cpts node Grygorii Strashko 2020-09-23 22:09 ` [PATCH v4 3/4] arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node Grygorii Strashko 2020-09-23 22:09 ` Grygorii Strashko 2020-09-23 22:09 ` [PATCH v4 4/4] arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs Grygorii Strashko 2020-09-23 22:09 ` Grygorii Strashko 2020-09-24 1:04 ` [PATCH v4 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw Suman Anna 2020-09-24 1:04 ` Suman Anna 2020-09-24 10:58 ` Nishanth Menon 2020-09-24 10:58 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200923220938.30788-3-grygorii.strashko@ti.com \ --to=grygorii.strashko@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=nsekhar@ti.com \ --cc=peter.ujfalusi@ti.com \ --cc=robh+dt@kernel.org \ --cc=s-anna@ti.com \ --cc=t-kristo@ti.com \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.