All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH 2/3] drm/i915: Nuke lspcon_ycbcr420_config()
Date: Thu, 24 Sep 2020 21:41:55 +0300	[thread overview]
Message-ID: <20200924184156.24491-2-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20200924184156.24491-1-ville.syrjala@linux.intel.com>

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Remove the lspcon special case from intel_dp_compute_config() and
just treat it like any other DFP than can do 4:4:4->4:2:0 conversion.

The only difference between the two codepaths was that the lspcon
code tried to already halve port_clock. That was just total nonsense
as we hadn't even computed the base port_clock at that time.
All that stuff happens intel_dp_compute_link_config*() and it
already takes care of the 4:2:0 clock reduction.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c     |  8 +++-----
 drivers/gpu/drm/i915/display/intel_lspcon.c | 14 --------------
 drivers/gpu/drm/i915/display/intel_lspcon.h |  2 --
 3 files changed, 3 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 54a4b81ea3ff..f58df4994d92 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2713,7 +2713,6 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-	struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder);
 	enum port port = encoder->port;
 	struct intel_connector *intel_connector = intel_dp->attached_connector;
 	struct intel_digital_connector_state *intel_conn_state =
@@ -2727,10 +2726,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 
 	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 
-	if (lspcon->active)
-		lspcon_ycbcr420_config(&intel_connector->base, pipe_config);
-	else
-		ret = intel_dp_ycbcr420_config(pipe_config, conn_state);
+	ret = intel_dp_ycbcr420_config(pipe_config, conn_state);
 	if (ret)
 		return ret;
 
@@ -6240,7 +6236,9 @@ intel_dp_update_420(struct intel_dp *intel_dp)
 	ycbcr_420_passthrough =
 		drm_dp_downstream_420_passthrough(intel_dp->dpcd,
 						  intel_dp->downstream_ports);
+	/* on-board LSPCON always assumed to support 4:4:4->4:2:0 conversion */
 	ycbcr_444_to_420 =
+		dp_to_dig_port(intel_dp)->lspcon.active ||
 		drm_dp_downstream_444_to_420_conversion(intel_dp->dpcd,
 							intel_dp->downstream_ports);
 
diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
index 59f13aef58b5..bbe011c5f7a5 100644
--- a/drivers/gpu/drm/i915/display/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
@@ -184,20 +184,6 @@ static bool lspcon_wake_native_aux_ch(struct intel_lspcon *lspcon)
 	return true;
 }
 
-void lspcon_ycbcr420_config(struct drm_connector *connector,
-			    struct intel_crtc_state *crtc_state)
-{
-	const struct drm_display_info *info = &connector->display_info;
-	const struct drm_display_mode *adjusted_mode =
-					&crtc_state->hw.adjusted_mode;
-
-	if (drm_mode_is_420_only(info, adjusted_mode) &&
-	    connector->ycbcr_420_allowed) {
-		crtc_state->port_clock /= 2;
-		crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR444;
-	}
-}
-
 static bool lspcon_probe(struct intel_lspcon *lspcon)
 {
 	int retry;
diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.h b/drivers/gpu/drm/i915/display/intel_lspcon.h
index 1cffe8a42a08..31eebab9ed57 100644
--- a/drivers/gpu/drm/i915/display/intel_lspcon.h
+++ b/drivers/gpu/drm/i915/display/intel_lspcon.h
@@ -32,7 +32,5 @@ void lspcon_set_infoframes(struct intel_encoder *encoder,
 			   const struct drm_connector_state *conn_state);
 u32 lspcon_infoframes_enabled(struct intel_encoder *encoder,
 			      const struct intel_crtc_state *pipe_config);
-void lspcon_ycbcr420_config(struct drm_connector *connector,
-			    struct intel_crtc_state *crtc_state);
 
 #endif /* __INTEL_LSPCON_H__ */
-- 
2.26.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2020-09-24 18:42 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-24 18:41 [Intel-gfx] [PATCH 1/3] drm/i915: Nuke lspcon_downsampling Ville Syrjala
2020-09-24 18:41 ` Ville Syrjala [this message]
2020-10-15 23:28   ` [Intel-gfx] [PATCH 2/3] drm/i915: Nuke lspcon_ycbcr420_config() Shankar, Uma
2020-09-24 18:41 ` [Intel-gfx] [PATCH 3/3] drm/i915: Inline intel_dp_ycbcr420_config() Ville Syrjala
2020-10-15 23:35   ` Shankar, Uma
2020-09-24 19:07 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for series starting with [1/3] drm/i915: Nuke lspcon_downsampling Patchwork
2020-09-24 19:32 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-09-24 22:14 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-10-15 23:21 ` [Intel-gfx] [PATCH 1/3] " Shankar, Uma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200924184156.24491-2-ville.syrjala@linux.intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.