From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <nm@ti.com>, <t-kristo@ti.com>, <ssantosh@kernel.org>,
<lokeshvutla@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <grygorii.strashko@ti.com>
Subject: [PATCH 02/11] firmware: ti_sci: Use struct ti_sci_resource_desc in get_range ops
Date: Mon, 28 Sep 2020 11:34:20 +0300 [thread overview]
Message-ID: <20200928083429.17390-3-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20200928083429.17390-1-peter.ujfalusi@ti.com>
Use the ti_sci_resource_desc directly and update it's start and num members
directly instead of requiring individual parameters for them.
This will allow easy extension of the RM parameters without changing API.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
drivers/firmware/ti_sci.c | 32 ++++++++++++--------------
include/linux/soc/ti/ti_sci_protocol.h | 32 +++++++++++++-------------
2 files changed, 31 insertions(+), 33 deletions(-)
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 65a8c2e82093..7a777e91ce3e 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -1703,14 +1703,14 @@ static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle)
* @subtype: Resource assignment subtype that is being requested
* from the given device.
* @s_host: Host processor ID to which the resources are allocated
- * @range_start: Start index of the resource range
- * @range_num: Number of resources in the range
+ * @desc: Pointer to ti_sci_resource_desc to be updated with the
+ * resource range start index and number of resources
*
* Return: 0 if all went fine, else return appropriate error.
*/
static int ti_sci_get_resource_range(const struct ti_sci_handle *handle,
u32 dev_id, u8 subtype, u8 s_host,
- u16 *range_start, u16 *range_num)
+ struct ti_sci_resource_desc *desc)
{
struct ti_sci_msg_resp_get_resource_range *resp;
struct ti_sci_msg_req_get_resource_range *req;
@@ -1721,7 +1721,7 @@ static int ti_sci_get_resource_range(const struct ti_sci_handle *handle,
if (IS_ERR(handle))
return PTR_ERR(handle);
- if (!handle)
+ if (!handle || !desc)
return -EINVAL;
info = handle_to_ti_sci_info(handle);
@@ -1754,8 +1754,8 @@ static int ti_sci_get_resource_range(const struct ti_sci_handle *handle,
} else if (!resp->range_start && !resp->range_num) {
ret = -ENODEV;
} else {
- *range_start = resp->range_start;
- *range_num = resp->range_num;
+ desc->start = resp->range_start;
+ desc->num = resp->range_num;
};
fail:
@@ -1771,18 +1771,18 @@ static int ti_sci_get_resource_range(const struct ti_sci_handle *handle,
* @dev_id: TISCI device ID.
* @subtype: Resource assignment subtype that is being requested
* from the given device.
- * @range_start: Start index of the resource range
- * @range_num: Number of resources in the range
+ * @desc: Pointer to ti_sci_resource_desc to be updated with the
+ * resource range start index and number of resources
*
* Return: 0 if all went fine, else return appropriate error.
*/
static int ti_sci_cmd_get_resource_range(const struct ti_sci_handle *handle,
u32 dev_id, u8 subtype,
- u16 *range_start, u16 *range_num)
+ struct ti_sci_resource_desc *desc)
{
return ti_sci_get_resource_range(handle, dev_id, subtype,
TI_SCI_IRQ_SECONDARY_HOST_INVALID,
- range_start, range_num);
+ desc);
}
/**
@@ -1793,18 +1793,17 @@ static int ti_sci_cmd_get_resource_range(const struct ti_sci_handle *handle,
* @subtype: Resource assignment subtype that is being requested
* from the given device.
* @s_host: Host processor ID to which the resources are allocated
- * @range_start: Start index of the resource range
- * @range_num: Number of resources in the range
+ * @desc: Pointer to ti_sci_resource_desc to be updated with the
+ * resource range start index and number of resources
*
* Return: 0 if all went fine, else return appropriate error.
*/
static
int ti_sci_cmd_get_resource_range_from_shost(const struct ti_sci_handle *handle,
u32 dev_id, u8 subtype, u8 s_host,
- u16 *range_start, u16 *range_num)
+ struct ti_sci_resource_desc *desc)
{
- return ti_sci_get_resource_range(handle, dev_id, subtype, s_host,
- range_start, range_num);
+ return ti_sci_get_resource_range(handle, dev_id, subtype, s_host, desc);
}
/**
@@ -3243,8 +3242,7 @@ devm_ti_sci_get_resource_sets(const struct ti_sci_handle *handle,
for (i = 0; i < res->sets; i++) {
ret = handle->ops.rm_core_ops.get_range(handle, dev_id,
sub_types[i],
- &res->desc[i].start,
- &res->desc[i].num);
+ &res->desc[i]);
if (ret) {
dev_dbg(dev, "dev = %d subtype %d not allocated for this host\n",
dev_id, sub_types[i]);
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
index d254d99fd45b..6cd537db4d33 100644
--- a/include/linux/soc/ti/ti_sci_protocol.h
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -195,6 +195,18 @@ struct ti_sci_clk_ops {
u64 *current_freq);
};
+/**
+ * struct ti_sci_resource_desc - Description of TI SCI resource instance range.
+ * @start: Start index of the resource.
+ * @num: Number of resources.
+ * @res_map: Bitmap to manage the allocation of these resources.
+ */
+struct ti_sci_resource_desc {
+ u16 start;
+ u16 num;
+ unsigned long *res_map;
+};
+
/**
* struct ti_sci_rm_core_ops - Resource management core operations
* @get_range: Get a range of resources belonging to ti sci host.
@@ -209,15 +221,15 @@ struct ti_sci_clk_ops {
* - dev_id: TISCI device ID.
* - subtype: Resource assignment subtype that is being requested
* from the given device.
- * - range_start: Start index of the resource range
- * - range_end: Number of resources in the range
+ * - desc: Pointer to ti_sci_resource_desc to be updated with the resource
+ * range start index and number of resources
*/
struct ti_sci_rm_core_ops {
int (*get_range)(const struct ti_sci_handle *handle, u32 dev_id,
- u8 subtype, u16 *range_start, u16 *range_num);
+ u8 subtype, struct ti_sci_resource_desc *desc);
int (*get_range_from_shost)(const struct ti_sci_handle *handle,
u32 dev_id, u8 subtype, u8 s_host,
- u16 *range_start, u16 *range_num);
+ struct ti_sci_resource_desc *desc);
};
#define TI_SCI_RESASG_SUBTYPE_IR_OUTPUT 0
@@ -522,18 +534,6 @@ struct ti_sci_handle {
#define TI_SCI_RESOURCE_NULL 0xffff
-/**
- * struct ti_sci_resource_desc - Description of TI SCI resource instance range.
- * @start: Start index of the resource.
- * @num: Number of resources.
- * @res_map: Bitmap to manage the allocation of these resources.
- */
-struct ti_sci_resource_desc {
- u16 start;
- u16 num;
- unsigned long *res_map;
-};
-
/**
* struct ti_sci_resource - Structure representing a resource assigned
* to a device.
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <nm@ti.com>, <t-kristo@ti.com>, <ssantosh@kernel.org>,
<lokeshvutla@ti.com>
Cc: grygorii.strashko@ti.com, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/11] firmware: ti_sci: Use struct ti_sci_resource_desc in get_range ops
Date: Mon, 28 Sep 2020 11:34:20 +0300 [thread overview]
Message-ID: <20200928083429.17390-3-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20200928083429.17390-1-peter.ujfalusi@ti.com>
Use the ti_sci_resource_desc directly and update it's start and num members
directly instead of requiring individual parameters for them.
This will allow easy extension of the RM parameters without changing API.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
drivers/firmware/ti_sci.c | 32 ++++++++++++--------------
include/linux/soc/ti/ti_sci_protocol.h | 32 +++++++++++++-------------
2 files changed, 31 insertions(+), 33 deletions(-)
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 65a8c2e82093..7a777e91ce3e 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -1703,14 +1703,14 @@ static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle)
* @subtype: Resource assignment subtype that is being requested
* from the given device.
* @s_host: Host processor ID to which the resources are allocated
- * @range_start: Start index of the resource range
- * @range_num: Number of resources in the range
+ * @desc: Pointer to ti_sci_resource_desc to be updated with the
+ * resource range start index and number of resources
*
* Return: 0 if all went fine, else return appropriate error.
*/
static int ti_sci_get_resource_range(const struct ti_sci_handle *handle,
u32 dev_id, u8 subtype, u8 s_host,
- u16 *range_start, u16 *range_num)
+ struct ti_sci_resource_desc *desc)
{
struct ti_sci_msg_resp_get_resource_range *resp;
struct ti_sci_msg_req_get_resource_range *req;
@@ -1721,7 +1721,7 @@ static int ti_sci_get_resource_range(const struct ti_sci_handle *handle,
if (IS_ERR(handle))
return PTR_ERR(handle);
- if (!handle)
+ if (!handle || !desc)
return -EINVAL;
info = handle_to_ti_sci_info(handle);
@@ -1754,8 +1754,8 @@ static int ti_sci_get_resource_range(const struct ti_sci_handle *handle,
} else if (!resp->range_start && !resp->range_num) {
ret = -ENODEV;
} else {
- *range_start = resp->range_start;
- *range_num = resp->range_num;
+ desc->start = resp->range_start;
+ desc->num = resp->range_num;
};
fail:
@@ -1771,18 +1771,18 @@ static int ti_sci_get_resource_range(const struct ti_sci_handle *handle,
* @dev_id: TISCI device ID.
* @subtype: Resource assignment subtype that is being requested
* from the given device.
- * @range_start: Start index of the resource range
- * @range_num: Number of resources in the range
+ * @desc: Pointer to ti_sci_resource_desc to be updated with the
+ * resource range start index and number of resources
*
* Return: 0 if all went fine, else return appropriate error.
*/
static int ti_sci_cmd_get_resource_range(const struct ti_sci_handle *handle,
u32 dev_id, u8 subtype,
- u16 *range_start, u16 *range_num)
+ struct ti_sci_resource_desc *desc)
{
return ti_sci_get_resource_range(handle, dev_id, subtype,
TI_SCI_IRQ_SECONDARY_HOST_INVALID,
- range_start, range_num);
+ desc);
}
/**
@@ -1793,18 +1793,17 @@ static int ti_sci_cmd_get_resource_range(const struct ti_sci_handle *handle,
* @subtype: Resource assignment subtype that is being requested
* from the given device.
* @s_host: Host processor ID to which the resources are allocated
- * @range_start: Start index of the resource range
- * @range_num: Number of resources in the range
+ * @desc: Pointer to ti_sci_resource_desc to be updated with the
+ * resource range start index and number of resources
*
* Return: 0 if all went fine, else return appropriate error.
*/
static
int ti_sci_cmd_get_resource_range_from_shost(const struct ti_sci_handle *handle,
u32 dev_id, u8 subtype, u8 s_host,
- u16 *range_start, u16 *range_num)
+ struct ti_sci_resource_desc *desc)
{
- return ti_sci_get_resource_range(handle, dev_id, subtype, s_host,
- range_start, range_num);
+ return ti_sci_get_resource_range(handle, dev_id, subtype, s_host, desc);
}
/**
@@ -3243,8 +3242,7 @@ devm_ti_sci_get_resource_sets(const struct ti_sci_handle *handle,
for (i = 0; i < res->sets; i++) {
ret = handle->ops.rm_core_ops.get_range(handle, dev_id,
sub_types[i],
- &res->desc[i].start,
- &res->desc[i].num);
+ &res->desc[i]);
if (ret) {
dev_dbg(dev, "dev = %d subtype %d not allocated for this host\n",
dev_id, sub_types[i]);
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
index d254d99fd45b..6cd537db4d33 100644
--- a/include/linux/soc/ti/ti_sci_protocol.h
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -195,6 +195,18 @@ struct ti_sci_clk_ops {
u64 *current_freq);
};
+/**
+ * struct ti_sci_resource_desc - Description of TI SCI resource instance range.
+ * @start: Start index of the resource.
+ * @num: Number of resources.
+ * @res_map: Bitmap to manage the allocation of these resources.
+ */
+struct ti_sci_resource_desc {
+ u16 start;
+ u16 num;
+ unsigned long *res_map;
+};
+
/**
* struct ti_sci_rm_core_ops - Resource management core operations
* @get_range: Get a range of resources belonging to ti sci host.
@@ -209,15 +221,15 @@ struct ti_sci_clk_ops {
* - dev_id: TISCI device ID.
* - subtype: Resource assignment subtype that is being requested
* from the given device.
- * - range_start: Start index of the resource range
- * - range_end: Number of resources in the range
+ * - desc: Pointer to ti_sci_resource_desc to be updated with the resource
+ * range start index and number of resources
*/
struct ti_sci_rm_core_ops {
int (*get_range)(const struct ti_sci_handle *handle, u32 dev_id,
- u8 subtype, u16 *range_start, u16 *range_num);
+ u8 subtype, struct ti_sci_resource_desc *desc);
int (*get_range_from_shost)(const struct ti_sci_handle *handle,
u32 dev_id, u8 subtype, u8 s_host,
- u16 *range_start, u16 *range_num);
+ struct ti_sci_resource_desc *desc);
};
#define TI_SCI_RESASG_SUBTYPE_IR_OUTPUT 0
@@ -522,18 +534,6 @@ struct ti_sci_handle {
#define TI_SCI_RESOURCE_NULL 0xffff
-/**
- * struct ti_sci_resource_desc - Description of TI SCI resource instance range.
- * @start: Start index of the resource.
- * @num: Number of resources.
- * @res_map: Bitmap to manage the allocation of these resources.
- */
-struct ti_sci_resource_desc {
- u16 start;
- u16 num;
- unsigned long *res_map;
-};
-
/**
* struct ti_sci_resource - Structure representing a resource assigned
* to a device.
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-28 8:34 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-28 8:34 [PATCH 00/11] firmware/soc: ti_sci, ringacc/inta: Preparation for AM64 DMA support Peter Ujfalusi
2020-09-28 8:34 ` Peter Ujfalusi
2020-09-28 8:34 ` [PATCH 01/11] firmware: ti_sci: rm: Add support for tx_tdtype parameter for tx channel Peter Ujfalusi
2020-09-28 8:34 ` Peter Ujfalusi
2020-09-28 8:34 ` Peter Ujfalusi [this message]
2020-09-28 8:34 ` [PATCH 02/11] firmware: ti_sci: Use struct ti_sci_resource_desc in get_range ops Peter Ujfalusi
2020-09-28 8:34 ` [PATCH 03/11] firmware: ti_sci: rm: Add support for second resource range Peter Ujfalusi
2020-09-28 8:34 ` Peter Ujfalusi
2020-09-28 8:34 ` [PATCH 04/11] soc: ti: ti_sci_inta_msi: Add support for second range in resource ranges Peter Ujfalusi
2020-09-28 8:34 ` Peter Ujfalusi
2020-09-28 8:34 ` [PATCH 05/11] firmware: ti_sci: rm: Add support for extended_ch_type for tx channel Peter Ujfalusi
2020-09-28 8:34 ` Peter Ujfalusi
2020-09-28 8:34 ` [PATCH 06/11] firmware: ti_sci: rm: Remove ring_get_config support Peter Ujfalusi
2020-09-28 8:34 ` Peter Ujfalusi
2020-09-30 11:14 ` Grygorii Strashko
2020-09-30 11:14 ` Grygorii Strashko
2020-09-28 8:34 ` [PATCH 07/11] firmware: ti_sci: rm: Add new ops for ring configuration Peter Ujfalusi
2020-09-28 8:34 ` Peter Ujfalusi
2020-09-30 13:54 ` Grygorii Strashko
2020-09-30 13:54 ` Grygorii Strashko
2020-09-28 8:34 ` [PATCH 08/11] soc: ti: k3-ringacc: Use the ti_sci set_cfg callback " Peter Ujfalusi
2020-09-28 8:34 ` Peter Ujfalusi
2020-09-30 13:55 ` Grygorii Strashko
2020-09-30 13:55 ` Grygorii Strashko
2020-09-28 8:34 ` [PATCH 09/11] firmware: ti_sci: rm: Remove unused config() from ti_sci_rm_ringacc_ops Peter Ujfalusi
2020-09-28 8:34 ` Peter Ujfalusi
2020-09-30 13:55 ` Grygorii Strashko
2020-09-30 13:55 ` Grygorii Strashko
2020-09-28 8:34 ` [PATCH 10/11] soc: ti: k3-ringacc: Use correct device for allocation in RING mode Peter Ujfalusi
2020-09-28 8:34 ` Peter Ujfalusi
2020-09-30 13:58 ` Grygorii Strashko
2020-09-30 13:58 ` Grygorii Strashko
2020-09-28 8:34 ` [PATCH 11/11] soc: ti: k3-socinfo: Add entry for AM64 SoC family Peter Ujfalusi
2020-09-28 8:34 ` Peter Ujfalusi
2020-09-30 13:56 ` Grygorii Strashko
2020-09-30 13:56 ` Grygorii Strashko
2020-10-01 6:42 ` Peter Ujfalusi
2020-10-01 6:42 ` Peter Ujfalusi
2020-10-01 7:07 ` Vignesh Raghavendra
2020-10-01 7:07 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200928083429.17390-3-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=grygorii.strashko@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=nm@ti.com \
--cc=ssantosh@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.