From: Roger Quadros <rogerq@ti.com> To: <nm@ti.com> Cc: <t-kristo@ti.com>, <nsekhar@ti.com>, <kishon@ti.com>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Roger Quadros <rogerq@ti.com> Subject: [PATCH v5 4/6] arm64: dts: ti: k3-j7200-main: Add USB controller Date: Wed, 30 Sep 2020 15:20:30 +0300 [thread overview] Message-ID: <20200930122032.23481-5-rogerq@ti.com> (raw) In-Reply-To: <20200930122032.23481-1-rogerq@ti.com> j7200 has on USB controller instance. Add that. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 30 +++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index c638c3d8c0f2..72d6496e88dd 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -416,4 +416,34 @@ no-1-8-v; dma-coherent; }; + + usbss0: cdns-usb@4104000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x4104000 0x00 0x100>; + dma-coherent; + power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 288 12>, <&k3_clks 288 3>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 288 12>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 288 13>; /* HFOSC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + + usb0: usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6000000 0x00 0x10000>, + <0x00 0x6010000 0x00 0x10000>, + <0x00 0x6020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; }; -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com> To: <nm@ti.com> Cc: devicetree@vger.kernel.org, nsekhar@ti.com, linux-kernel@vger.kernel.org, kishon@ti.com, t-kristo@ti.com, linux-arm-kernel@lists.infradead.org, Roger Quadros <rogerq@ti.com> Subject: [PATCH v5 4/6] arm64: dts: ti: k3-j7200-main: Add USB controller Date: Wed, 30 Sep 2020 15:20:30 +0300 [thread overview] Message-ID: <20200930122032.23481-5-rogerq@ti.com> (raw) In-Reply-To: <20200930122032.23481-1-rogerq@ti.com> j7200 has on USB controller instance. Add that. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 30 +++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index c638c3d8c0f2..72d6496e88dd 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -416,4 +416,34 @@ no-1-8-v; dma-coherent; }; + + usbss0: cdns-usb@4104000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x4104000 0x00 0x100>; + dma-coherent; + power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 288 12>, <&k3_clks 288 3>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 288 12>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 288 13>; /* HFOSC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + + usb0: usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6000000 0x00 0x10000>, + <0x00 0x6010000 0x00 0x10000>, + <0x00 0x6020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; }; -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-30 12:21 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-30 12:20 [PATCH v5 0/6] arm64: dts: ti: Add USB support for J7200 EVM Roger Quadros 2020-09-30 12:20 ` Roger Quadros 2020-09-30 12:20 ` [PATCH v5 1/6] dt-bindings: ti-serdes-mux: Add defines for J7200 SoC Roger Quadros 2020-09-30 12:20 ` Roger Quadros 2020-09-30 12:20 ` [PATCH v5 2/6] arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux Roger Quadros 2020-09-30 12:20 ` Roger Quadros 2020-09-30 12:20 ` [PATCH v5 3/6] arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX Roger Quadros 2020-09-30 12:20 ` Roger Quadros 2020-09-30 12:20 ` Roger Quadros [this message] 2020-09-30 12:20 ` [PATCH v5 4/6] arm64: dts: ti: k3-j7200-main: Add USB controller Roger Quadros 2020-09-30 12:20 ` [PATCH v5 5/6] arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function Roger Quadros 2020-09-30 12:20 ` Roger Quadros 2020-09-30 12:20 ` [PATCH v5 6/6] arm64: dts: ti: k3-j7200-common-proc-board: Add USB support Roger Quadros 2020-09-30 12:20 ` Roger Quadros 2020-09-30 13:18 ` [PATCH v5 0/6] arm64: dts: ti: Add USB support for J7200 EVM Nishanth Menon 2020-09-30 13:18 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200930122032.23481-5-rogerq@ti.com \ --to=rogerq@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=nsekhar@ti.com \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.