All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kai Vehmanen <kai.vehmanen@linux.intel.com>
To: alsa-devel@alsa-project.org, tiwai@suse.de
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>,
	Kailang Yang <kailang@realtek.com>,
	Kai Vehmanen <kai.vehmanen@linux.intel.com>
Subject: [PATCH 1/1] ALSA: hda: fix jack detection with Realtek codecs when in D3
Date: Fri,  9 Oct 2020 17:02:27 +0300	[thread overview]
Message-ID: <20201009140227.691140-1-kai.vehmanen@linux.intel.com> (raw)

In case HDA controller is active, but codec is runtime suspended, jack
detection is not successful and no interrupt is raised. This has been
observed with multiple Realtek codecs and HDA controllers from different
vendors. Bug does not occur if both codec and controller are active,
or both are in suspend. Bug can be easily hit on desktop systems with
no built-in speaker.

The problem can be fixed by powering up the codec once after every
controller runtime resume. Even if codec goes back to suspend, the jack
detection will now work. Add a flag to 'hda_codec' to describe codecs
that require this flow from the controller driver. Mark all Realtek
codecs with this flag.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209379
Cc: Kailang Yang <kailang@realtek.com>
Co-developed-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
---
 include/sound/hda_codec.h     | 1 +
 sound/pci/hda/hda_intel.c     | 8 ++++++--
 sound/pci/hda/patch_realtek.c | 6 ++++++
 3 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h
index 0fea49bfc5e8..73827b7d17e0 100644
--- a/include/sound/hda_codec.h
+++ b/include/sound/hda_codec.h
@@ -253,6 +253,7 @@ struct hda_codec {
 	unsigned int force_pin_prefix:1; /* Add location prefix */
 	unsigned int link_down_at_suspend:1; /* link down at runtime suspend */
 	unsigned int relaxed_resume:1;	/* don't resume forcibly for jack */
+	unsigned int forced_resume:1; /* forced resume for jack */
 	unsigned int mst_no_extra_pcms:1; /* no backup PCMs for DP-MST */
 
 #ifdef CONFIG_PM
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 61e495187b1a..cfc073c992e7 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1002,12 +1002,16 @@ static void __azx_runtime_resume(struct azx *chip, bool from_rt)
 	azx_init_pci(chip);
 	hda_intel_init_chip(chip, true);
 
-	if (status && from_rt) {
-		list_for_each_codec(codec, &chip->bus)
+	if (from_rt) {
+		list_for_each_codec(codec, &chip->bus) {
+			if (codec->forced_resume && pm_runtime_suspended(hda_codec_dev(codec)))
+				pm_request_resume(hda_codec_dev(codec));
+
 			if (!codec->relaxed_resume &&
 			    (status & (1 << codec->addr)))
 				schedule_delayed_work(&codec->jackpoll_work,
 						      codec->jackpoll_interval);
+		}
 	}
 
 	/* power down again for link-controlled chips */
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index f89506dffd5b..e4ab483db72f 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -849,6 +849,12 @@ static int alc_build_controls(struct hda_codec *codec)
 static void alc_pre_init(struct hda_codec *codec)
 {
 	alc_fill_eapd_coef(codec);
+
+	/*
+	 * if controller is resumed from suspend, while codec remains in D3, codec
+	 * needs to be woken up once or otherwise jack detection does not work
+	 */
+	codec->forced_resume = 1;
 }
 
 #define is_s3_resume(codec) \
-- 
2.28.0


             reply	other threads:[~2020-10-09 14:06 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-09 14:02 Kai Vehmanen [this message]
2020-10-09 14:35 ` [PATCH 1/1] ALSA: hda: fix jack detection with Realtek codecs when in D3 Takashi Iwai
2020-10-09 15:24   ` Kai Vehmanen
2020-10-09 14:38 ` Pierre-Louis Bossart
2020-10-09 14:44   ` Takashi Iwai
2020-10-09 15:00     ` Pierre-Louis Bossart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201009140227.691140-1-kai.vehmanen@linux.intel.com \
    --to=kai.vehmanen@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=kai.heng.feng@canonical.com \
    --cc=kailang@realtek.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.