From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<linus.walleij@linaro.org>, <bgolaszewski@baylibre.com>,
<linux-gpio@vger.kernel.org>, <openbmc@lists.ozlabs.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [PATCH 1/3] Arm: dts: aspeed-g6: Fix the register range of gpio
Date: Mon, 12 Oct 2020 11:31:48 +0800 [thread overview]
Message-ID: <20201012033150.21056-2-billy_tsai@aspeedtech.com> (raw)
In-Reply-To: <20201012033150.21056-1-billy_tsai@aspeedtech.com>
This patch is used to fix the memory range of gpio0
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 97ca743363d7..ad19dce038ea 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -357,7 +357,7 @@
#gpio-cells = <2>;
gpio-controller;
compatible = "aspeed,ast2600-gpio";
- reg = <0x1e780000 0x800>;
+ reg = <0x1e780000 0x400>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 0 208>;
ngpios = <208>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<linus.walleij@linaro.org>, <bgolaszewski@baylibre.com>,
<linux-gpio@vger.kernel.org>, <openbmc@lists.ozlabs.org>
Cc: BMC-SW@aspeedtech.com
Subject: [PATCH 1/3] Arm: dts: aspeed-g6: Fix the register range of gpio
Date: Mon, 12 Oct 2020 11:31:48 +0800 [thread overview]
Message-ID: <20201012033150.21056-2-billy_tsai@aspeedtech.com> (raw)
In-Reply-To: <20201012033150.21056-1-billy_tsai@aspeedtech.com>
This patch is used to fix the memory range of gpio0
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 97ca743363d7..ad19dce038ea 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -357,7 +357,7 @@
#gpio-cells = <2>;
gpio-controller;
compatible = "aspeed,ast2600-gpio";
- reg = <0x1e780000 0x800>;
+ reg = <0x1e780000 0x400>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 0 208>;
ngpios = <208>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<linus.walleij@linaro.org>, <bgolaszewski@baylibre.com>,
<linux-gpio@vger.kernel.org>, <openbmc@lists.ozlabs.org>
Cc: BMC-SW@aspeedtech.com
Subject: [PATCH 1/3] Arm: dts: aspeed-g6: Fix the register range of gpio
Date: Mon, 12 Oct 2020 11:31:48 +0800 [thread overview]
Message-ID: <20201012033150.21056-2-billy_tsai@aspeedtech.com> (raw)
In-Reply-To: <20201012033150.21056-1-billy_tsai@aspeedtech.com>
This patch is used to fix the memory range of gpio0
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 97ca743363d7..ad19dce038ea 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -357,7 +357,7 @@
#gpio-cells = <2>;
gpio-controller;
compatible = "aspeed,ast2600-gpio";
- reg = <0x1e780000 0x800>;
+ reg = <0x1e780000 0x400>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 0 208>;
ngpios = <208>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-10-12 4:03 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-12 3:31 [V2 PATCH 0/3] Fix the memory layout and add sgpio node for aspeed g6 Billy Tsai
2020-10-12 3:31 ` Billy Tsai
2020-10-12 3:31 ` Billy Tsai
2020-10-12 3:31 ` Billy Tsai [this message]
2020-10-12 3:31 ` [PATCH 1/3] Arm: dts: aspeed-g6: Fix the register range of gpio Billy Tsai
2020-10-12 3:31 ` Billy Tsai
2020-10-12 4:30 ` Joel Stanley
2020-10-12 4:30 ` Joel Stanley
2020-10-12 4:30 ` Joel Stanley
2020-10-26 1:05 ` Andrew Jeffery
2020-10-26 1:05 ` Andrew Jeffery
2020-10-28 5:12 ` Joel Stanley
2020-10-28 5:12 ` Joel Stanley
2020-10-28 5:12 ` Joel Stanley
2020-10-12 3:31 ` [PATCH 2/3] Arm: dts: aspeed-g6: Add sgpio node Billy Tsai
2020-10-12 3:31 ` Billy Tsai
2020-10-12 3:31 ` Billy Tsai
2020-10-12 4:35 ` Joel Stanley
2020-10-12 4:35 ` Joel Stanley
2020-10-12 4:35 ` Joel Stanley
2020-10-12 4:53 ` Billy Tsai
2020-10-12 4:53 ` Billy Tsai
2020-10-12 4:53 ` Billy Tsai
2020-10-28 5:10 ` Joel Stanley
2020-10-28 5:10 ` Joel Stanley
2020-10-28 5:10 ` Joel Stanley
2020-10-26 1:33 ` Andrew Jeffery
2020-10-26 1:33 ` Andrew Jeffery
2020-10-26 1:33 ` Andrew Jeffery
2020-10-12 3:31 ` [PATCH 3/3] pinctrl: aspeed-g6: Add sgpiom2 pinctrl setting Billy Tsai
2020-10-12 3:31 ` Billy Tsai
2020-10-12 3:31 ` Billy Tsai
2020-10-12 4:36 ` Joel Stanley
2020-10-12 4:36 ` Joel Stanley
2020-10-12 4:36 ` Joel Stanley
2020-10-26 1:26 ` Andrew Jeffery
2020-10-26 1:26 ` Andrew Jeffery
2020-10-26 2:03 ` Billy Tsai
2020-10-26 2:03 ` Billy Tsai
2020-10-26 2:03 ` Billy Tsai
2020-10-26 2:20 ` Andrew Jeffery
2020-10-26 2:20 ` Andrew Jeffery
2020-10-26 2:20 ` Andrew Jeffery
2020-10-26 2:56 ` Billy Tsai
2020-10-26 2:56 ` Billy Tsai
2020-10-26 2:56 ` Billy Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201012033150.21056-2-billy_tsai@aspeedtech.com \
--to=billy_tsai@aspeedtech.com \
--cc=BMC-SW@aspeedtech.com \
--cc=andrew@aj.id.au \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.