All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: "Pavel Machek" <pavel@ucw.cz>, "Dan Murphy" <dmurphy@ti.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Andy Gross" <agross@kernel.org>,
	"Bjorn Andersson" <bjorn.andersson@linaro.org>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Lee Jones" <lee.jones@linaro.org>,
	"Martin Botka" <martin.botka1@gmail.com>
Cc: linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-pwm@vger.kernel.org
Subject: [PATCH v5 3/4] arm64: dts: qcom: pm(i)8994: Add mpp and lpg blocks
Date: Fri, 16 Oct 2020 22:20:56 -0700	[thread overview]
Message-ID: <20201017052057.2698588-4-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20201017052057.2698588-1-bjorn.andersson@linaro.org>

The pm8994 contains a 6 LPG channels and the pmi8994 contains 4 MPP
channels and a 4 channel LPG, with TRILED and LUT blocks.

Add nodes for these blocks.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v4:
- Replaced msm8996 with pm(i)8994 in subject

 arch/arm64/boot/dts/qcom/pm8994.dtsi  |  9 +++++++++
 arch/arm64/boot/dts/qcom/pmi8994.dtsi | 20 ++++++++++++++++++++
 2 files changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index 7e4f777746cb..b5bef687aa3c 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -86,6 +86,15 @@ pmic@1 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8994_lpg: lpg {
+			compatible = "qcom,pm8994-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		pm8994_spmi_regulators: regulators {
 			compatible = "qcom,pm8994-regulators";
 		};
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index e5ed28ab9b2d..23f41328d191 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -19,6 +19,17 @@ pmi8994_gpios: gpios@c000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		pmi8994_mpps: mpps@a000 {
+			compatible = "qcom,pm8994-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>;
+		};
 	};
 
 	pmic@3 {
@@ -27,6 +38,15 @@ pmic@3 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmi8994_lpg: lpg@b100 {
+			compatible = "qcom,pmi8994-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		pmi8994_spmi_regulators: regulators {
 			compatible = "qcom,pmi8994-regulators";
 			#address-cells = <1>;
-- 
2.28.0


  parent reply	other threads:[~2020-10-17  5:29 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-17  5:20 [PATCH v5 0/4] Qualcomm Light Pulse Generator Bjorn Andersson
2020-10-17  5:20 ` [PATCH v5 1/4] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding Bjorn Andersson
2020-10-17  5:20 ` [PATCH v5 2/4] leds: Add driver for Qualcomm LPG Bjorn Andersson
2020-10-17 15:37   ` Martin Botka
2020-10-26  8:27     ` Pavel Machek
2020-10-26  9:02       ` Martin Botka
2020-10-26 15:11         ` Pavel Machek
2020-10-26 15:19           ` Martin Botka
2020-10-18 20:12   ` Andy Shevchenko
2020-10-20  4:24     ` Bjorn Andersson
2020-10-29 12:14       ` Andy Shevchenko
2020-10-17  5:20 ` Bjorn Andersson [this message]
2020-10-17  5:20 ` [PATCH v5 4/4] arm64: dts: qcom: Add user LEDs on db820c Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201017052057.2698588-4-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=martin.botka1@gmail.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.