From: Ian Abbott <abbotti@mev.co.uk> To: devel@driverdev.osuosl.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Ian Abbott <abbotti@mev.co.uk>, H Hartley Sweeten <hsweeten@visionengravers.com>, stable@vger.kernel.org Subject: [PATCH] staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdevice Date: Wed, 21 Oct 2020 13:21:42 +0100 [thread overview] Message-ID: <20201021122142.81628-1-abbotti@mev.co.uk> (raw) The "cb_pcidas" driver supports asynchronous commands on the analog output (AO) subdevice for those boards that have an AO FIFO. The code (in `cb_pcidas_ao_check_chanlist()` and `cb_pcidas_ao_cmd()`) to validate and set up the command supports output to a single channel or to two channels simultaneously (the boards have two AO channels). However, the code in `cb_pcidas_auto_attach()` that initializes the subdevices neglects to initialize the AO subdevice's `len_chanlist` member, leaving it set to 0, but the Comedi core will "correct" it to 1 if the driver neglected to set it. This limits commands to use a single channel (either channel 0 or 1), but the limit should be two channels. Set the AO subdevice's `len_chanlist` member to be the same value as the `n_chan` member, which will be 2. Cc: <stable@vger.kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> --- drivers/staging/comedi/drivers/cb_pcidas.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c index 48ec2ee953dc..d740c4782775 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas.c +++ b/drivers/staging/comedi/drivers/cb_pcidas.c @@ -1342,6 +1342,7 @@ static int cb_pcidas_auto_attach(struct comedi_device *dev, if (dev->irq && board->has_ao_fifo) { dev->write_subdev = s; s->subdev_flags |= SDF_CMD_WRITE; + s->len_chanlist = s->n_chan; s->do_cmdtest = cb_pcidas_ao_cmdtest; s->do_cmd = cb_pcidas_ao_cmd; s->cancel = cb_pcidas_ao_cancel; -- 2.28.0
WARNING: multiple messages have this Message-ID (diff)
From: Ian Abbott <abbotti@mev.co.uk> To: devel@driverdev.osuosl.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Ian Abbott <abbotti@mev.co.uk>, stable@vger.kernel.org Subject: [PATCH] staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdevice Date: Wed, 21 Oct 2020 13:21:42 +0100 [thread overview] Message-ID: <20201021122142.81628-1-abbotti@mev.co.uk> (raw) The "cb_pcidas" driver supports asynchronous commands on the analog output (AO) subdevice for those boards that have an AO FIFO. The code (in `cb_pcidas_ao_check_chanlist()` and `cb_pcidas_ao_cmd()`) to validate and set up the command supports output to a single channel or to two channels simultaneously (the boards have two AO channels). However, the code in `cb_pcidas_auto_attach()` that initializes the subdevices neglects to initialize the AO subdevice's `len_chanlist` member, leaving it set to 0, but the Comedi core will "correct" it to 1 if the driver neglected to set it. This limits commands to use a single channel (either channel 0 or 1), but the limit should be two channels. Set the AO subdevice's `len_chanlist` member to be the same value as the `n_chan` member, which will be 2. Cc: <stable@vger.kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> --- drivers/staging/comedi/drivers/cb_pcidas.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c index 48ec2ee953dc..d740c4782775 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas.c +++ b/drivers/staging/comedi/drivers/cb_pcidas.c @@ -1342,6 +1342,7 @@ static int cb_pcidas_auto_attach(struct comedi_device *dev, if (dev->irq && board->has_ao_fifo) { dev->write_subdev = s; s->subdev_flags |= SDF_CMD_WRITE; + s->len_chanlist = s->n_chan; s->do_cmdtest = cb_pcidas_ao_cmdtest; s->do_cmd = cb_pcidas_ao_cmd; s->cancel = cb_pcidas_ao_cancel; -- 2.28.0 _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next reply other threads:[~2020-10-21 12:31 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-21 12:21 Ian Abbott [this message] 2020-10-21 12:21 ` [PATCH] staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdevice Ian Abbott
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201021122142.81628-1-abbotti@mev.co.uk \ --to=abbotti@mev.co.uk \ --cc=devel@driverdev.osuosl.org \ --cc=gregkh@linuxfoundation.org \ --cc=hsweeten@visionengravers.com \ --cc=stable@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.