From: Tony Lindgren <tony@atomide.com> To: linux-omap@vger.kernel.org Cc: "Andrew F . Davis" <afd@ti.com>, Dave Gerlach <d-gerlach@ti.com>, Faiz Abbas <faiz_abbas@ti.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Grygorii Strashko <grygorii.strashko@ti.com>, Keerthy <j-keerthy@ti.com>, Nishanth Menon <nm@ti.com>, Peter Ujfalusi <peter.ujfalusi@ti.com>, Roger Quadros <rogerq@ti.com>, Suman Anna <s-anna@ti.com>, Tero Kristo <t-kristo@ti.com>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 4/4] bus: ti-sysc: Fix bogus resetdone warning for cpsw Date: Mon, 26 Oct 2020 12:58:12 +0200 [thread overview] Message-ID: <20201026105812.38418-5-tony@atomide.com> (raw) In-Reply-To: <20201026105812.38418-1-tony@atomide.com> The cpsw SOFT_RESET register is cleard when out of reset so let's add SYSS_QUIRK_RESETDONE_INVERTED flag for cpsw. Otherwise we will get bogus "OCP softreset timed out" warnings on boot. Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") Signed-off-by: Tony Lindgren <tony@atomide.com> --- drivers/bus/ti-sysc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1364,6 +1364,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { /* Quirks that need to be set based on detected module */ SYSC_QUIRK("aess", 0, 0, 0x10, -ENODEV, 0x40000000, 0xffffffff, SYSC_MODULE_QUIRK_AESS), + SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902, + 0xffff00f0, SYSS_QUIRK_RESETDONE_INVERTED), SYSC_QUIRK("dcan", 0x48480000, 0x20, -ENODEV, -ENODEV, 0xa3170504, 0xffffffff, SYSC_QUIRK_CLKDM_NOAUTO), SYSC_QUIRK("dss", 0x4832a000, 0, 0x10, 0x14, 0x00000020, 0xffffffff, @@ -1423,8 +1425,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK("atl", 0, 0, -ENODEV, -ENODEV, 0x0a070100, 0xffffffff, 0), SYSC_QUIRK("cm", 0, 0, -ENODEV, -ENODEV, 0x40000301, 0xffffffff, 0), SYSC_QUIRK("control", 0, 0, 0x10, -ENODEV, 0x40000900, 0xffffffff, 0), - SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902, - 0xffff00f0, 0), SYSC_QUIRK("dcan", 0, 0x20, -ENODEV, -ENODEV, 0xa3170504, 0xffffffff, 0), SYSC_QUIRK("dcan", 0, 0x20, -ENODEV, -ENODEV, 0x4edb1902, 0xffffffff, 0), SYSC_QUIRK("dispc", 0x4832a400, 0, 0x10, 0x14, 0x00000030, 0xffffffff, 0), -- 2.29.1
WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com> To: linux-omap@vger.kernel.org Cc: Nishanth Menon <nm@ti.com>, Tero Kristo <t-kristo@ti.com>, Grygorii Strashko <grygorii.strashko@ti.com>, Dave Gerlach <d-gerlach@ti.com>, Keerthy <j-keerthy@ti.com>, linux-kernel@vger.kernel.org, "Andrew F . Davis" <afd@ti.com>, Peter Ujfalusi <peter.ujfalusi@ti.com>, Faiz Abbas <faiz_abbas@ti.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, linux-arm-kernel@lists.infradead.org, Roger Quadros <rogerq@ti.com> Subject: [PATCH 4/4] bus: ti-sysc: Fix bogus resetdone warning for cpsw Date: Mon, 26 Oct 2020 12:58:12 +0200 [thread overview] Message-ID: <20201026105812.38418-5-tony@atomide.com> (raw) In-Reply-To: <20201026105812.38418-1-tony@atomide.com> The cpsw SOFT_RESET register is cleard when out of reset so let's add SYSS_QUIRK_RESETDONE_INVERTED flag for cpsw. Otherwise we will get bogus "OCP softreset timed out" warnings on boot. Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") Signed-off-by: Tony Lindgren <tony@atomide.com> --- drivers/bus/ti-sysc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1364,6 +1364,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { /* Quirks that need to be set based on detected module */ SYSC_QUIRK("aess", 0, 0, 0x10, -ENODEV, 0x40000000, 0xffffffff, SYSC_MODULE_QUIRK_AESS), + SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902, + 0xffff00f0, SYSS_QUIRK_RESETDONE_INVERTED), SYSC_QUIRK("dcan", 0x48480000, 0x20, -ENODEV, -ENODEV, 0xa3170504, 0xffffffff, SYSC_QUIRK_CLKDM_NOAUTO), SYSC_QUIRK("dss", 0x4832a000, 0, 0x10, 0x14, 0x00000020, 0xffffffff, @@ -1423,8 +1425,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK("atl", 0, 0, -ENODEV, -ENODEV, 0x0a070100, 0xffffffff, 0), SYSC_QUIRK("cm", 0, 0, -ENODEV, -ENODEV, 0x40000301, 0xffffffff, 0), SYSC_QUIRK("control", 0, 0, 0x10, -ENODEV, 0x40000900, 0xffffffff, 0), - SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902, - 0xffff00f0, 0), SYSC_QUIRK("dcan", 0, 0x20, -ENODEV, -ENODEV, 0xa3170504, 0xffffffff, 0), SYSC_QUIRK("dcan", 0, 0x20, -ENODEV, -ENODEV, 0x4edb1902, 0xffffffff, 0), SYSC_QUIRK("dispc", 0x4832a400, 0, 0x10, 0x14, 0x00000030, 0xffffffff, 0), -- 2.29.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-10-26 11:00 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-26 10:58 [PATCH 0/4] Few ti-sysc related fixes Tony Lindgren 2020-10-26 10:58 ` Tony Lindgren 2020-10-26 10:58 ` [PATCH 1/4] ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS Tony Lindgren 2020-10-26 10:58 ` Tony Lindgren 2020-10-26 10:58 ` [PATCH 2/4] ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF Tony Lindgren 2020-10-26 10:58 ` Tony Lindgren 2020-10-26 10:58 ` [PATCH 3/4] bus: ti-sysc: Fix reset status check for modules with quirks Tony Lindgren 2020-10-26 10:58 ` Tony Lindgren 2020-10-26 10:58 ` Tony Lindgren [this message] 2020-10-26 10:58 ` [PATCH 4/4] bus: ti-sysc: Fix bogus resetdone warning for cpsw Tony Lindgren 2020-10-30 18:15 ` Grygorii Strashko 2020-10-30 18:15 ` Grygorii Strashko 2020-10-31 7:11 ` Tony Lindgren 2020-10-31 7:11 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201026105812.38418-5-tony@atomide.com \ --to=tony@atomide.com \ --cc=afd@ti.com \ --cc=d-gerlach@ti.com \ --cc=faiz_abbas@ti.com \ --cc=gregkh@linuxfoundation.org \ --cc=grygorii.strashko@ti.com \ --cc=j-keerthy@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=nm@ti.com \ --cc=peter.ujfalusi@ti.com \ --cc=rogerq@ti.com \ --cc=s-anna@ti.com \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.