From: Kai-Heng Feng <kai.heng.feng@canonical.com> To: tiwai@suse.com Cc: perex@perex.cz, hui.wang@canonical.com, kai.vehmanen@linux.intel.com, mwolf@adiumentum.com, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Kai-Heng Feng <kai.heng.feng@canonical.com> Subject: [PATCH v3 1/3] ALSA: hda: Refactor codec PM to use direct-complete optimization Date: Tue, 27 Oct 2020 21:00:36 +0800 [thread overview] Message-ID: <20201027130038.16463-2-kai.heng.feng@canonical.com> (raw) In-Reply-To: <20201027130038.16463-1-kai.heng.feng@canonical.com> Upon system resume, hda_codec_pm_resume() uses hda_codec_force_resume() to resume the codec. However, pm_runtime_force_resume() won't really resume the codec because of pm_runtime_need_not_resume() check. Hence, hda_codec_force_resume() schedules a jackpoll work, which is to really power up the codec. Instead of doing that, we can use direct-complete to make the PM flow more straightforward, and keep codec always suspended through system PM flow if conditions are met. On system suspend, PM core will decide what to do based on hda_codec_pm_prepare(): - If codec is not runtime-suspended, PM core will suspend and resume the device as normal. - If codec is runtime-suspended, PM core will try to keep it suspended. If it's still suspended after system resume, we use hda_codec_pm_complete() to resume codec if it's needed. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> --- v3: - No change v2: - Also resume when codec->jackpoll_interval is set sound/pci/hda/hda_codec.c | 45 +++++++++++++++++++++++++-------------- 1 file changed, 29 insertions(+), 16 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index a356c21edb90..4bb58e8b08a8 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2934,7 +2934,7 @@ static void hda_call_codec_resume(struct hda_codec *codec) snd_hdac_leave_pm(&codec->core); } -static int hda_codec_runtime_suspend(struct device *dev) +static int hda_codec_suspend(struct device *dev) { struct hda_codec *codec = dev_to_hda_codec(dev); unsigned int state; @@ -2953,7 +2953,7 @@ static int hda_codec_runtime_suspend(struct device *dev) return 0; } -static int hda_codec_runtime_resume(struct device *dev) +static int hda_codec_resume(struct device *dev) { struct hda_codec *codec = dev_to_hda_codec(dev); @@ -2967,57 +2967,70 @@ static int hda_codec_runtime_resume(struct device *dev) pm_runtime_mark_last_busy(dev); return 0; } + +static int hda_codec_runtime_suspend(struct device *dev) +{ + return hda_codec_suspend(dev); +} + +static int hda_codec_runtime_resume(struct device *dev) +{ + return hda_codec_resume(dev); +} + #endif /* CONFIG_PM */ #ifdef CONFIG_PM_SLEEP -static int hda_codec_force_resume(struct device *dev) +static int hda_codec_pm_prepare(struct device *dev) +{ + return pm_runtime_suspended(dev); +} + +static void hda_codec_pm_complete(struct device *dev) { struct hda_codec *codec = dev_to_hda_codec(dev); - int ret; - ret = pm_runtime_force_resume(dev); - /* schedule jackpoll work for jack detection update */ - if (codec->jackpoll_interval || - (pm_runtime_suspended(dev) && hda_codec_need_resume(codec))) - schedule_delayed_work(&codec->jackpoll_work, - codec->jackpoll_interval); - return ret; + if (pm_runtime_suspended(dev) && (codec->jackpoll_interval || + hda_codec_need_resume(codec) || codec->forced_resume)) + pm_request_resume(dev); } static int hda_codec_pm_suspend(struct device *dev) { dev->power.power_state = PMSG_SUSPEND; - return pm_runtime_force_suspend(dev); + return hda_codec_suspend(dev); } static int hda_codec_pm_resume(struct device *dev) { dev->power.power_state = PMSG_RESUME; - return hda_codec_force_resume(dev); + return hda_codec_resume(dev); } static int hda_codec_pm_freeze(struct device *dev) { dev->power.power_state = PMSG_FREEZE; - return pm_runtime_force_suspend(dev); + return hda_codec_suspend(dev); } static int hda_codec_pm_thaw(struct device *dev) { dev->power.power_state = PMSG_THAW; - return hda_codec_force_resume(dev); + return hda_codec_resume(dev); } static int hda_codec_pm_restore(struct device *dev) { dev->power.power_state = PMSG_RESTORE; - return hda_codec_force_resume(dev); + return hda_codec_resume(dev); } #endif /* CONFIG_PM_SLEEP */ /* referred in hda_bind.c */ const struct dev_pm_ops hda_codec_driver_pm = { #ifdef CONFIG_PM_SLEEP + .prepare = hda_codec_pm_prepare, + .complete = hda_codec_pm_complete, .suspend = hda_codec_pm_suspend, .resume = hda_codec_pm_resume, .freeze = hda_codec_pm_freeze, -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Kai-Heng Feng <kai.heng.feng@canonical.com> To: tiwai@suse.com Cc: alsa-devel@alsa-project.org, mwolf@adiumentum.com, kai.vehmanen@linux.intel.com, linux-kernel@vger.kernel.org, hui.wang@canonical.com, Kai-Heng Feng <kai.heng.feng@canonical.com> Subject: [PATCH v3 1/3] ALSA: hda: Refactor codec PM to use direct-complete optimization Date: Tue, 27 Oct 2020 21:00:36 +0800 [thread overview] Message-ID: <20201027130038.16463-2-kai.heng.feng@canonical.com> (raw) In-Reply-To: <20201027130038.16463-1-kai.heng.feng@canonical.com> Upon system resume, hda_codec_pm_resume() uses hda_codec_force_resume() to resume the codec. However, pm_runtime_force_resume() won't really resume the codec because of pm_runtime_need_not_resume() check. Hence, hda_codec_force_resume() schedules a jackpoll work, which is to really power up the codec. Instead of doing that, we can use direct-complete to make the PM flow more straightforward, and keep codec always suspended through system PM flow if conditions are met. On system suspend, PM core will decide what to do based on hda_codec_pm_prepare(): - If codec is not runtime-suspended, PM core will suspend and resume the device as normal. - If codec is runtime-suspended, PM core will try to keep it suspended. If it's still suspended after system resume, we use hda_codec_pm_complete() to resume codec if it's needed. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> --- v3: - No change v2: - Also resume when codec->jackpoll_interval is set sound/pci/hda/hda_codec.c | 45 +++++++++++++++++++++++++-------------- 1 file changed, 29 insertions(+), 16 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index a356c21edb90..4bb58e8b08a8 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2934,7 +2934,7 @@ static void hda_call_codec_resume(struct hda_codec *codec) snd_hdac_leave_pm(&codec->core); } -static int hda_codec_runtime_suspend(struct device *dev) +static int hda_codec_suspend(struct device *dev) { struct hda_codec *codec = dev_to_hda_codec(dev); unsigned int state; @@ -2953,7 +2953,7 @@ static int hda_codec_runtime_suspend(struct device *dev) return 0; } -static int hda_codec_runtime_resume(struct device *dev) +static int hda_codec_resume(struct device *dev) { struct hda_codec *codec = dev_to_hda_codec(dev); @@ -2967,57 +2967,70 @@ static int hda_codec_runtime_resume(struct device *dev) pm_runtime_mark_last_busy(dev); return 0; } + +static int hda_codec_runtime_suspend(struct device *dev) +{ + return hda_codec_suspend(dev); +} + +static int hda_codec_runtime_resume(struct device *dev) +{ + return hda_codec_resume(dev); +} + #endif /* CONFIG_PM */ #ifdef CONFIG_PM_SLEEP -static int hda_codec_force_resume(struct device *dev) +static int hda_codec_pm_prepare(struct device *dev) +{ + return pm_runtime_suspended(dev); +} + +static void hda_codec_pm_complete(struct device *dev) { struct hda_codec *codec = dev_to_hda_codec(dev); - int ret; - ret = pm_runtime_force_resume(dev); - /* schedule jackpoll work for jack detection update */ - if (codec->jackpoll_interval || - (pm_runtime_suspended(dev) && hda_codec_need_resume(codec))) - schedule_delayed_work(&codec->jackpoll_work, - codec->jackpoll_interval); - return ret; + if (pm_runtime_suspended(dev) && (codec->jackpoll_interval || + hda_codec_need_resume(codec) || codec->forced_resume)) + pm_request_resume(dev); } static int hda_codec_pm_suspend(struct device *dev) { dev->power.power_state = PMSG_SUSPEND; - return pm_runtime_force_suspend(dev); + return hda_codec_suspend(dev); } static int hda_codec_pm_resume(struct device *dev) { dev->power.power_state = PMSG_RESUME; - return hda_codec_force_resume(dev); + return hda_codec_resume(dev); } static int hda_codec_pm_freeze(struct device *dev) { dev->power.power_state = PMSG_FREEZE; - return pm_runtime_force_suspend(dev); + return hda_codec_suspend(dev); } static int hda_codec_pm_thaw(struct device *dev) { dev->power.power_state = PMSG_THAW; - return hda_codec_force_resume(dev); + return hda_codec_resume(dev); } static int hda_codec_pm_restore(struct device *dev) { dev->power.power_state = PMSG_RESTORE; - return hda_codec_force_resume(dev); + return hda_codec_resume(dev); } #endif /* CONFIG_PM_SLEEP */ /* referred in hda_bind.c */ const struct dev_pm_ops hda_codec_driver_pm = { #ifdef CONFIG_PM_SLEEP + .prepare = hda_codec_pm_prepare, + .complete = hda_codec_pm_complete, .suspend = hda_codec_pm_suspend, .resume = hda_codec_pm_resume, .freeze = hda_codec_pm_freeze, -- 2.17.1
next prev parent reply other threads:[~2020-10-27 13:00 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-27 13:00 [PATCH v3 0/3] HDA controller PM and codec PM cleanups Kai-Heng Feng 2020-10-27 13:00 ` Kai-Heng Feng 2020-10-27 13:00 ` Kai-Heng Feng [this message] 2020-10-27 13:00 ` [PATCH v3 1/3] ALSA: hda: Refactor codec PM to use direct-complete optimization Kai-Heng Feng 2020-10-27 13:00 ` [PATCH v3 2/3] ALSA: hda: Separate runtime and system suspend Kai-Heng Feng 2020-10-27 13:00 ` Kai-Heng Feng 2020-10-27 13:00 ` [PATCH v3 3/3] ALSA: hda: Reinstate runtime_allow() for all hda controllers Kai-Heng Feng 2020-10-27 13:00 ` Kai-Heng Feng 2020-10-28 19:38 ` [PATCH v3 0/3] HDA controller PM and codec PM cleanups Takashi Iwai 2020-10-28 19:38 ` Takashi Iwai
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201027130038.16463-2-kai.heng.feng@canonical.com \ --to=kai.heng.feng@canonical.com \ --cc=alsa-devel@alsa-project.org \ --cc=hui.wang@canonical.com \ --cc=kai.vehmanen@linux.intel.com \ --cc=linux-kernel@vger.kernel.org \ --cc=mwolf@adiumentum.com \ --cc=perex@perex.cz \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.