All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Gibson <david@gibson.dropbear.id.au>
To: peter.maydell@linaro.org
Cc: Thomas Huth <thuth@redhat.com>,
	zhaolichang <zhaolichang@huawei.com>,
	qemu-devel@nongnu.org, groug@kaod.org,
	David Edmondson <david.edmondson@oracle.com>,
	qemu-ppc@nongnu.org, David Gibson <david@gibson.dropbear.id.au>
Subject: [PULL 18/18] ppc/: fix some comment spelling errors
Date: Wed, 28 Oct 2020 01:17:35 +1100	[thread overview]
Message-ID: <20201027141735.728821-19-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20201027141735.728821-1-david@gibson.dropbear.id.au>

From: zhaolichang <zhaolichang@huawei.com>

I found that there are many spelling errors in the comments of qemu/target/ppc.
I used spellcheck to check the spelling errors and found some errors in the folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20201009064449.2336-3-zhaolichang@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
 target/ppc/cpu.h                | 6 +++---
 target/ppc/excp_helper.c        | 6 +++---
 target/ppc/fpu_helper.c         | 2 +-
 target/ppc/internal.h           | 2 +-
 target/ppc/kvm.c                | 2 +-
 target/ppc/machine.c            | 2 +-
 target/ppc/mmu-hash64.c         | 2 +-
 target/ppc/mmu_helper.c         | 4 ++--
 target/ppc/translate_init.c.inc | 2 +-
 9 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
index e8aa185d4f..2eb41a295a 100644
--- a/target/ppc/cpu.h
+++ b/target/ppc/cpu.h
@@ -615,7 +615,7 @@ enum {
 #define FPSCR_VXCVI  8  /* Floating-point invalid operation exception (int)  */
 #define FPSCR_VE     7  /* Floating-point invalid operation exception enable */
 #define FPSCR_OE     6  /* Floating-point overflow exception enable          */
-#define FPSCR_UE     5  /* Floating-point undeflow exception enable          */
+#define FPSCR_UE     5  /* Floating-point underflow exception enable          */
 #define FPSCR_ZE     4  /* Floating-point zero divide exception enable       */
 #define FPSCR_XE     3  /* Floating-point inexact exception enable           */
 #define FPSCR_NI     2  /* Floating-point non-IEEE mode                      */
@@ -2331,13 +2331,13 @@ enum {
     /* Internal hardware exception sources */
     PPC_INTERRUPT_DECR,           /* Decrementer exception                */
     PPC_INTERRUPT_HDECR,          /* Hypervisor decrementer exception     */
-    PPC_INTERRUPT_PIT,            /* Programmable inteval timer interrupt */
+    PPC_INTERRUPT_PIT,            /* Programmable interval timer interrupt */
     PPC_INTERRUPT_FIT,            /* Fixed interval timer interrupt       */
     PPC_INTERRUPT_WDT,            /* Watchdog timer interrupt             */
     PPC_INTERRUPT_CDOORBELL,      /* Critical doorbell interrupt          */
     PPC_INTERRUPT_DOORBELL,       /* Doorbell interrupt                   */
     PPC_INTERRUPT_PERFM,          /* Performance monitor interrupt        */
-    PPC_INTERRUPT_HMI,            /* Hypervisor Maintainance interrupt    */
+    PPC_INTERRUPT_HMI,            /* Hypervisor Maintenance interrupt    */
     PPC_INTERRUPT_HDOORBELL,      /* Hypervisor Doorbell interrupt        */
     PPC_INTERRUPT_HVIRT,          /* Hypervisor virtualization interrupt  */
 };
diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index a988ba15f4..d7411bcc81 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -231,7 +231,7 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
     }
 
     /*
-     * Exception targetting modifiers
+     * Exception targeting modifiers
      *
      * LPES0 is supported on POWER7/8/9
      * LPES1 is not supported (old iSeries mode)
@@ -1015,7 +1015,7 @@ static void ppc_hw_interrupt(CPUPPCState *env)
          * This means we will incorrectly execute past the power management
          * instruction instead of triggering a reset.
          *
-         * It generally means a discrepancy between the wakup conditions in the
+         * It generally means a discrepancy between the wakeup conditions in the
          * processor has_work implementation and the logic in this function.
          */
         cpu_abort(env_cpu(env),
@@ -1191,7 +1191,7 @@ void helper_rfi(CPUPPCState *env)
 void helper_rfid(CPUPPCState *env)
 {
     /*
-     * The architeture defines a number of rules for which bits can
+     * The architecture defines a number of rules for which bits can
      * change but in practice, we handle this in hreg_store_msr()
      * which will be called by do_rfi(), so there is no need to filter
      * here
diff --git a/target/ppc/fpu_helper.c b/target/ppc/fpu_helper.c
index ae43b08eb5..9b8c8b70b6 100644
--- a/target/ppc/fpu_helper.c
+++ b/target/ppc/fpu_helper.c
@@ -1804,7 +1804,7 @@ uint32_t helper_efdcmpeq(CPUPPCState *env, uint64_t op1, uint64_t op2)
 
 
 /*
- * VSX_ADD_SUB - VSX floating point add/subract
+ * VSX_ADD_SUB - VSX floating point add/subtract
  *   name  - instruction mnemonic
  *   op    - operation (add or sub)
  *   nels  - number of elements (1, 2 or 4)
diff --git a/target/ppc/internal.h b/target/ppc/internal.h
index 15d655b356..b4df127f4a 100644
--- a/target/ppc/internal.h
+++ b/target/ppc/internal.h
@@ -1,5 +1,5 @@
 /*
- *  PowerPC interal definitions for qemu.
+ *  PowerPC internal definitions for qemu.
  *
  * This library is free software; you can redistribute it and/or
  * modify it under the terms of the GNU Lesser General Public
diff --git a/target/ppc/kvm.c b/target/ppc/kvm.c
index 0223b93ea5..daf690a678 100644
--- a/target/ppc/kvm.c
+++ b/target/ppc/kvm.c
@@ -487,7 +487,7 @@ int kvm_arch_init_vcpu(CPUState *cs)
             /*
              * KVM-HV has transactional memory on POWER8 also without
              * the KVM_CAP_PPC_HTM extension, so enable it here
-             * instead as long as it's availble to userspace on the
+             * instead as long as it's available to userspace on the
              * host.
              */
             if (qemu_getauxval(AT_HWCAP2) & PPC_FEATURE2_HAS_HTM) {
diff --git a/target/ppc/machine.c b/target/ppc/machine.c
index 5e58377376..c38e7b1268 100644
--- a/target/ppc/machine.c
+++ b/target/ppc/machine.c
@@ -337,7 +337,7 @@ static int cpu_post_load(void *opaque, int version_id)
 
     /*
      * If we're operating in compat mode, we should be ok as long as
-     * the destination supports the same compatiblity mode.
+     * the destination supports the same compatibility mode.
      *
      * Otherwise, however, we require that the destination has exactly
      * the same CPU model as the source.
diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
index c31d21e6a9..977b2d1561 100644
--- a/target/ppc/mmu-hash64.c
+++ b/target/ppc/mmu-hash64.c
@@ -883,7 +883,7 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr,
     /*
      * Note on LPCR usage: 970 uses HID4, but our special variant of
      * store_spr copies relevant fields into env->spr[SPR_LPCR].
-     * Similarily we filter unimplemented bits when storing into LPCR
+     * Similarly we filter unimplemented bits when storing into LPCR
      * depending on the MMU version. This code can thus just use the
      * LPCR "as-is".
      */
diff --git a/target/ppc/mmu_helper.c b/target/ppc/mmu_helper.c
index 8972714775..50aa18a763 100644
--- a/target/ppc/mmu_helper.c
+++ b/target/ppc/mmu_helper.c
@@ -179,7 +179,7 @@ static inline int ppc6xx_tlb_pte_check(mmu_ctx_t *ctx, target_ulong pte0,
             }
             /* Compute access rights */
             access = pp_check(ctx->key, pp, ctx->nx);
-            /* Keep the matching PTE informations */
+            /* Keep the matching PTE information */
             ctx->raddr = pte1;
             ctx->prot = access;
             ret = check_prot(ctx->prot, rw, type);
@@ -2176,7 +2176,7 @@ void helper_store_sr(CPUPPCState *env, target_ulong srnum, target_ulong value)
         env->sr[srnum] = value;
         /*
          * Invalidating 256MB of virtual memory in 4kB pages is way
-         * longer than flusing the whole TLB.
+         * longer than flushing the whole TLB.
          */
 #if !defined(FLUSH_ALL_TLBS) && 0
         {
diff --git a/target/ppc/translate_init.c.inc b/target/ppc/translate_init.c.inc
index d2a8204d60..dc68da3cfd 100644
--- a/target/ppc/translate_init.c.inc
+++ b/target/ppc/translate_init.c.inc
@@ -792,7 +792,7 @@ static void gen_spr_generic(CPUPPCState *env)
                  &spr_read_xer, &spr_write_xer,
                  &spr_read_xer, &spr_write_xer,
                  0x00000000);
-    /* Branch contol */
+    /* Branch control */
     spr_register(env, SPR_LR, "LR",
                  &spr_read_lr, &spr_write_lr,
                  &spr_read_lr, &spr_write_lr,
-- 
2.26.2



  parent reply	other threads:[~2020-10-27 14:44 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-27 14:17 [PULL 00/18] ppc-for-5.2 queue 20201028 David Gibson
2020-10-27 14:17 ` [PULL 01/18] spapr: Clarify why DR connectors aren't user creatable David Gibson
2020-10-27 14:17 ` [PULL 02/18] ppc/spapr: re-assert IRQs during event-scan if there are pending David Gibson
2020-10-27 14:17 ` [PULL 03/18] hw/net: move allocation to the heap due to very large stack frame David Gibson
2020-10-27 14:17 ` [PULL 04/18] spapr: Move spapr_create_nvdimm_dr_connectors() to core machine code David Gibson
2020-10-27 14:17 ` [PULL 05/18] spapr: Fix leak of CPU machine specific data David Gibson
2020-10-27 14:17 ` [PULL 06/18] spapr: Unrealize vCPUs with qdev_unrealize() David Gibson
2020-10-27 14:17 ` [PULL 07/18] spapr: Drop spapr_delete_vcpu() unused argument David Gibson
2020-10-27 14:17 ` [PULL 08/18] spapr: Make spapr_cpu_core_unrealize() idempotent David Gibson
2020-10-27 14:17 ` [PULL 09/18] spapr: Simplify spapr_cpu_core_realize() and spapr_cpu_core_unrealize() David Gibson
2020-10-27 14:17 ` [PULL 10/18] pc-dimm: Drop @errp argument of pc_dimm_plug() David Gibson
2020-10-27 14:17 ` [PULL 11/18] spapr: Use appropriate getter for PC_DIMM_ADDR_PROP David Gibson
2020-10-27 14:17 ` [PULL 12/18] spapr: Use appropriate getter for PC_DIMM_SLOT_PROP David Gibson
2020-10-27 14:17 ` [PULL 13/18] spapr: Pass &error_abort when getting some PC DIMM properties David Gibson
2020-10-27 14:17 ` [PULL 14/18] spapr: Simplify error handling in spapr_memory_plug() David Gibson
2020-10-27 14:17 ` [PULL 15/18] spapr: Use error_append_hint() in spapr_reallocate_hpt() David Gibson
2020-10-27 14:17 ` [PULL 16/18] target/ppc: Fix kvmppc_load_htab_chunk() error reporting David Gibson
2020-10-27 14:17 ` [PULL 17/18] spapr: Improve spapr_reallocate_hpt() " David Gibson
2020-10-27 14:17 ` David Gibson [this message]
2020-10-30 11:55 ` [PULL 00/18] ppc-for-5.2 queue 20201028 Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201027141735.728821-19-david@gibson.dropbear.id.au \
    --to=david@gibson.dropbear.id.au \
    --cc=david.edmondson@oracle.com \
    --cc=groug@kaod.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    --cc=thuth@redhat.com \
    --cc=zhaolichang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.