[PULL 10/10] hw/pci-host/sabre: Simplify code initializing variable once

[Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

We only need to zero-initialize 'val' once.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201012170950.3491912-4-f4bug@amsat.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/pci-host/sabre.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/hw/pci-host/sabre.c b/hw/pci-host/sabre.c
index f678a3eefc..f41a0cc301 100644
--- a/hw/pci-host/sabre.c
+++ b/hw/pci-host/sabre.c
@@ -195,32 +195,25 @@ static uint64_t sabre_config_read(void *opaque,
                                   hwaddr addr, unsigned size)
 {
     SabreState *s = opaque;
-    uint32_t val;
+    uint32_t val = 0;
 
     switch (addr) {
     case 0x30 ... 0x4f: /* DMA error registers */
-        val = 0;
         /* XXX: not implemented yet */
         break;
     case 0xc00 ... 0xc3f: /* PCI interrupt control */
         if (addr & 4) {
             val = s->pci_irq_map[(addr & 0x3f) >> 3];
-        } else {
-            val = 0;
         }
         break;
     case 0x1000 ... 0x107f: /* OBIO interrupt control */
         if (addr & 4) {
             val = s->obio_irq_map[(addr & 0xff) >> 3];
-        } else {
-            val = 0;
         }
         break;
     case 0x1080 ... 0x108f: /* PCI bus error */
         if (addr & 4) {
             val = s->pci_err_irq_map[(addr & 0xf) >> 3];
-        } else {
-            val = 0;
         }
         break;
     case 0x2000 ... 0x202f: /* PCI control */
@@ -229,8 +222,6 @@ static uint64_t sabre_config_read(void *opaque,
     case 0xf020 ... 0xf027: /* Reset control */
         if (addr & 4) {
             val = s->reset_control;
-        } else {
-            val = 0;
         }
         break;
     case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */
@@ -239,7 +230,6 @@ static uint64_t sabre_config_read(void *opaque,
     case 0xf000 ... 0xf01f: /* FFB config, memory control */
         /* we don't care */
     default:
-        val = 0;
         break;
     }
     trace_sabre_config_read(addr, val);
-- 
2.20.1