From: Ran Wang <ran.wang_1@nxp.com>
To: Li Yang <leoyang.li@nxp.com>, Shawn Guo <shawnguo@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Ran Wang <ran.wang_1@nxp.com>
Subject: [PATCH v4 2/3] arm: dts: ls1021a: fix flextimer failed to wake system
Date: Mon, 2 Nov 2020 15:26:51 +0800 [thread overview]
Message-ID: <20201102072652.34893-2-ran.wang_1@nxp.com> (raw)
In-Reply-To: <20201102072652.34893-1-ran.wang_1@nxp.com>
The data of property 'fsl,rcpm-wakeup' is not corrcet, which causing
RCPM driver incorrectly program register IPPDEXPCR1, then flextimer is
wrongly clock gated during system suspend, can't send interrupt to
wake.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
---
Change in v4:
- None
Change in v3:
- None
Change in v2:
- None
arch/arm/boot/dts/ls1021a.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 827373e..e12809d6 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -1013,7 +1013,7 @@
compatible = "fsl,ls1021a-ftm-alarm";
reg = <0x0 0x29d0000 0x0 0x10000>;
reg-names = "ftm";
- fsl,rcpm-wakeup = <&rcpm 0x20000 0x0>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
big-endian;
};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Ran Wang <ran.wang_1@nxp.com>
To: Li Yang <leoyang.li@nxp.com>, Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Ran Wang <ran.wang_1@nxp.com>
Subject: [PATCH v4 2/3] arm: dts: ls1021a: fix flextimer failed to wake system
Date: Mon, 2 Nov 2020 15:26:51 +0800 [thread overview]
Message-ID: <20201102072652.34893-2-ran.wang_1@nxp.com> (raw)
In-Reply-To: <20201102072652.34893-1-ran.wang_1@nxp.com>
The data of property 'fsl,rcpm-wakeup' is not corrcet, which causing
RCPM driver incorrectly program register IPPDEXPCR1, then flextimer is
wrongly clock gated during system suspend, can't send interrupt to
wake.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
---
Change in v4:
- None
Change in v3:
- None
Change in v2:
- None
arch/arm/boot/dts/ls1021a.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 827373e..e12809d6 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -1013,7 +1013,7 @@
compatible = "fsl,ls1021a-ftm-alarm";
reg = <0x0 0x29d0000 0x0 0x10000>;
reg-names = "ftm";
- fsl,rcpm-wakeup = <&rcpm 0x20000 0x0>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
big-endian;
};
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-02 7:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-02 7:26 [PATCH v4 1/3] soc: fsl: handle RCPM errata A-008646 on SoC LS1021A Ran Wang
2020-11-02 7:26 ` Ran Wang
2020-11-02 7:26 ` Ran Wang [this message]
2020-11-02 7:26 ` [PATCH v4 2/3] arm: dts: ls1021a: fix flextimer failed to wake system Ran Wang
2020-11-30 7:07 ` Shawn Guo
2020-11-30 7:07 ` Shawn Guo
2020-11-02 7:26 ` [PATCH v4 3/3] arm: dts: ls1021a: fix rcpm failed to claim resource Ran Wang
2020-11-02 7:26 ` Ran Wang
2020-11-30 7:08 ` Shawn Guo
2020-11-30 7:08 ` Shawn Guo
2020-11-24 1:13 ` [PATCH v4 1/3] soc: fsl: handle RCPM errata A-008646 on SoC LS1021A Li Yang
2020-11-24 1:13 ` Li Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201102072652.34893-2-ran.wang_1@nxp.com \
--to=ran.wang_1@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.