All of lore.kernel.org
 help / color / mirror / Atom feed
From: Viswas G <Viswas.G@microchip.com.com>
To: <linux-scsi@vger.kernel.org>
Cc: <Vasanthalakshmi.Tharmarajan@microchip.com>,
	<Viswas.G@microchip.com>, <Ruksar.devadi@microchip.com>,
	<martin.petersen@oracle.com>, <yuuzheng@google.com>,
	<vishakhavc@google.com>, <radha@google.com>,
	<akshatzen@google.com>, <jinpu.wang@cloud.ionos.com>
Subject: [PATCH V3 2/4] pm80xx: make running_req atomic.
Date: Mon, 2 Nov 2020 22:25:26 +0530	[thread overview]
Message-ID: <20201102165528.26510-3-Viswas.G@microchip.com.com> (raw)
In-Reply-To: <20201102165528.26510-1-Viswas.G@microchip.com.com>

From: Viswas G <Viswas.G@microchip.com>

Incorrect value of the running_req was causing the driver unload
to be stuck during the sas lldd_dev_gone notification handling.
During sata IO completion, for some of the error status, driver
is scheduling event handler and running_req is decremented from that.
But there are some other error status (like IO_DS_IN_RECOVERY,
IO_XFER_ERR_LAST_PIO_DATAIN_CRC_ERR) where the IO have been completed
by fw/driver, but running_req is not decremented.

Also During NCQ error handling, driver itself will initiate
READ_LOG_EXT and ABORT_ALL. When libsas/libata initiate READ_LOG_EXT
(0x2F), driver increments the running_req. But this will be completed
by the driver in pm80xx_chip_sata_req(), but running_req was not
decremented.

Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
---
 drivers/scsi/pm8001/pm8001_hwi.c  |  58 +++++++++++++++++-----
 drivers/scsi/pm8001/pm8001_init.c |   2 +-
 drivers/scsi/pm8001/pm8001_sas.c  |  11 +++--
 drivers/scsi/pm8001/pm8001_sas.h  |   2 +-
 drivers/scsi/pm8001/pm80xx_hwi.c  | 101 ++++++++++++++++++++++++++++++++++----
 5 files changed, 147 insertions(+), 27 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 597d7a096a97..9e9a546da959 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1587,7 +1587,7 @@ void pm8001_work_fn(struct work_struct *work)
 		ts->stat = SAS_QUEUE_FULL;
 		pm8001_dev = ccb->device;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		spin_lock_irqsave(&t->task_state_lock, flags1);
 		t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
 		t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
@@ -1942,7 +1942,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 			sas_ssp_task_response(pm8001_ha->dev, t, iu);
 		}
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_ABORTED:
 		PM8001_IO_DBG(pm8001_ha,
@@ -1958,7 +1958,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->stat = SAS_DATA_UNDERRUN;
 		ts->residual = param;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_NO_DEVICE:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2172,7 +2172,7 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->stat = SAS_DATA_OVERRUN;
 		ts->residual = 0;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_BREAK:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2487,7 +2487,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 					pm8001_printk("response to large\n"));
 		}
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_ABORTED:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2495,7 +2495,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_ABORTED_TASK;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 		/* following cases are to do cases */
 	case IO_UNDERFLOW:
@@ -2506,19 +2506,23 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->stat = SAS_DATA_UNDERRUN;
 		ts->residual =  param;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_NO_DEVICE:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_NO_DEVICE\n"));
 		ts->resp = SAS_TASK_UNDELIVERED;
 		ts->stat = SAS_PHY_DOWN;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_BREAK:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_BREAK\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_INTERRUPTED;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_PHY_NOT_READY:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2526,6 +2530,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2534,6 +2540,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_EPROTO;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2541,6 +2549,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_BREAK:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2548,6 +2558,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2587,6 +2599,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2610,48 +2624,64 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_NAK_RECEIVED:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_NAK_R_ERR;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_NAK_R_ERR;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_DMA:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_DMA\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_ABORTED_TASK;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
 		ts->resp = SAS_TASK_UNDELIVERED;
 		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_REJECTED_NCQ_MODE:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_DATA_UNDERRUN;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_OPEN_RETRY_TIMEOUT:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_TO;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_PORT_IN_RESET:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_PORT_IN_RESET\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_DS_NON_OPERATIONAL:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2672,6 +2702,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 			pm8001_printk("  IO_DS_IN_RECOVERY\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_DS_IN_ERROR:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2693,6 +2725,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	default:
 		PM8001_DEVIO_DBG(pm8001_ha,
@@ -2700,6 +2734,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		/* not allowed case. Therefore, return failed status */
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	}
 	spin_lock_irqsave(&t->task_state_lock, flags);
@@ -2776,7 +2812,7 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->stat = SAS_DATA_OVERRUN;
 		ts->residual = 0;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_BREAK:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2976,7 +3012,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAM_STAT_GOOD;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_ABORTED:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2984,7 +3020,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_ABORTED_TASK;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OVERFLOW:
 		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
@@ -2992,7 +3028,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->stat = SAS_DATA_OVERRUN;
 		ts->residual = 0;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_NO_DEVICE:
 		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 3cf3e58b6979..fb471ad3720a 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -412,7 +412,7 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
 		pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
 		pm8001_ha->devices[i].id = i;
 		pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
-		pm8001_ha->devices[i].running_req = 0;
+		atomic_set(&pm8001_ha->devices[i].running_req, 0);
 	}
 	pm8001_ha->flags = PM8001F_INIT_TIME;
 	/* Initialize tags */
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 9889bab7d31c..d6e0bc588698 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -456,9 +456,11 @@ static int pm8001_task_exec(struct sas_task *task,
 		ccb->device = pm8001_dev;
 		switch (task_proto) {
 		case SAS_PROTOCOL_SMP:
+			atomic_inc(&pm8001_dev->running_req);
 			rc = pm8001_task_prep_smp(pm8001_ha, ccb);
 			break;
 		case SAS_PROTOCOL_SSP:
+			atomic_inc(&pm8001_dev->running_req);
 			if (is_tmf)
 				rc = pm8001_task_prep_ssp_tm(pm8001_ha,
 					ccb, tmf);
@@ -467,6 +469,7 @@ static int pm8001_task_exec(struct sas_task *task,
 			break;
 		case SAS_PROTOCOL_SATA:
 		case SAS_PROTOCOL_STP:
+			atomic_inc(&pm8001_dev->running_req);
 			rc = pm8001_task_prep_ata(pm8001_ha, ccb);
 			break;
 		default:
@@ -479,13 +482,13 @@ static int pm8001_task_exec(struct sas_task *task,
 		if (rc) {
 			PM8001_IO_DBG(pm8001_ha,
 				pm8001_printk("rc is %x\n", rc));
+			atomic_dec(&pm8001_dev->running_req);
 			goto err_out_tag;
 		}
 		/* TODO: select normal or high priority */
 		spin_lock(&t->task_state_lock);
 		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
 		spin_unlock(&t->task_state_lock);
-		pm8001_dev->running_req++;
 	} while (0);
 	rc = 0;
 	goto out_done;
@@ -886,11 +889,11 @@ static void pm8001_dev_gone_notify(struct domain_device *dev)
 		PM8001_DISC_DBG(pm8001_ha,
 			pm8001_printk("found dev[%d:%x] is gone.\n",
 			pm8001_dev->device_id, pm8001_dev->dev_type));
-		if (pm8001_dev->running_req) {
+		if (atomic_read(&pm8001_dev->running_req)) {
 			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 			pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 				dev, 1, 0);
-			while (pm8001_dev->running_req)
+			while (atomic_read(&pm8001_dev->running_req))
 				msleep(20);
 			spin_lock_irqsave(&pm8001_ha->lock, flags);
 		}
@@ -968,7 +971,7 @@ void pm8001_open_reject_retry(
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		spin_lock_irqsave(&task->task_state_lock, flags1);
 		task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
 		task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 95663e138083..091574721ea1 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -293,7 +293,7 @@ struct pm8001_device {
 	struct completion	*dcompletion;
 	struct completion	*setds_completion;
 	u32			device_id;
-	u32			running_req;
+	atomic_t		running_req;
 };
 
 struct pm8001_prd_imt {
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 5fe50e0effcd..1ba93fb76093 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1960,13 +1960,15 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 			sas_ssp_task_response(pm8001_ha->dev, t, iu);
 		}
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_ABORTED:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_ABORTED IOMB Tag\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_ABORTED_TASK;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_UNDERFLOW:
 		/* SSP Completion with error */
@@ -1977,13 +1979,15 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->stat = SAS_DATA_UNDERRUN;
 		ts->residual = param;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_NO_DEVICE:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_NO_DEVICE\n"));
 		ts->resp = SAS_TASK_UNDELIVERED;
 		ts->stat = SAS_PHY_DOWN;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_BREAK:
 		PM8001_IO_DBG(pm8001_ha,
@@ -1992,6 +1996,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->stat = SAS_OPEN_REJECT;
 		/* Force the midlayer to retry */
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_PHY_NOT_READY:
 		PM8001_IO_DBG(pm8001_ha,
@@ -1999,6 +2005,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_INVALID_SSP_RSP_FRAME:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2006,6 +2014,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2013,6 +2023,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_EPROTO;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2020,6 +2032,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_BREAK:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2027,6 +2041,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
 	case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
@@ -2050,6 +2066,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
 		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
@@ -2057,6 +2075,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2064,6 +2084,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->resp = SAS_TASK_UNDELIVERED;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_NAK_RECEIVED:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2071,18 +2093,24 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_NAK_R_ERR;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_DMA:
 		PM8001_IO_DBG(pm8001_ha,
 		pm8001_printk("IO_XFER_ERROR_DMA\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_OPEN_RETRY_TIMEOUT:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2090,18 +2118,24 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_OFFSET_MISMATCH:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_PORT_IN_RESET:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_PORT_IN_RESET\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_DS_NON_OPERATIONAL:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2118,18 +2152,24 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 			pm8001_printk("IO_DS_IN_RECOVERY\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_TM_TAG_NOT_FOUND:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_TM_TAG_NOT_FOUND\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2137,6 +2177,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	default:
 		PM8001_DEVIO_DBG(pm8001_ha,
@@ -2144,6 +2186,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		/* not allowed case. Therefore, return failed status */
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	}
 	PM8001_IO_DBG(pm8001_ha,
@@ -2203,7 +2247,7 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->stat = SAS_DATA_OVERRUN;
 		ts->residual = 0;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_BREAK:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2528,7 +2572,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 					pm8001_printk("response too large\n"));
 		}
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_ABORTED:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2536,7 +2580,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_ABORTED_TASK;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 		/* following cases are to do cases */
 	case IO_UNDERFLOW:
@@ -2547,19 +2591,23 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->stat = SAS_DATA_UNDERRUN;
 		ts->residual = param;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_NO_DEVICE:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_NO_DEVICE\n"));
 		ts->resp = SAS_TASK_UNDELIVERED;
 		ts->stat = SAS_PHY_DOWN;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_BREAK:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_BREAK\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_INTERRUPTED;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_PHY_NOT_READY:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2567,6 +2615,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
 		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
@@ -2574,6 +2624,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_EPROTO;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2581,6 +2633,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_BREAK:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2588,6 +2642,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
 	case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
@@ -2631,6 +2687,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
 		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
@@ -2653,48 +2711,64 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_NAK_RECEIVED:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_NAK_R_ERR;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_NAK_R_ERR;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_DMA:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_DMA\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_ABORTED_TASK;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
 		ts->resp = SAS_TASK_UNDELIVERED;
 		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_REJECTED_NCQ_MODE:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_DATA_UNDERRUN;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_OPEN_RETRY_TIMEOUT:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_TO;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_PORT_IN_RESET:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("IO_PORT_IN_RESET\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_DS_NON_OPERATIONAL:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2715,6 +2789,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 			pm8001_printk("IO_DS_IN_RECOVERY\n"));
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_DS_IN_ERROR:
 		PM8001_IO_DBG(pm8001_ha,
@@ -2736,6 +2812,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	default:
 		PM8001_DEVIO_DBG(pm8001_ha,
@@ -2743,6 +2821,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		/* not allowed case. Therefore, return failed status */
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (pm8001_dev)
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	}
 	spin_lock_irqsave(&t->task_state_lock, flags);
@@ -2820,7 +2900,7 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->stat = SAS_DATA_OVERRUN;
 		ts->residual = 0;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_BREAK:
 		PM8001_IO_DBG(pm8001_ha,
@@ -3040,7 +3120,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAM_STAT_GOOD;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
 			PM8001_IO_DBG(pm8001_ha,
 				pm8001_printk("DIRECT RESPONSE Length:%d\n",
@@ -3063,7 +3143,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_ABORTED_TASK;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_OVERFLOW:
 		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
@@ -3071,7 +3151,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->stat = SAS_DATA_OVERRUN;
 		ts->residual = 0;
 		if (pm8001_dev)
-			pm8001_dev->running_req--;
+			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_NO_DEVICE:
 		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
@@ -4809,6 +4889,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 							flags);
 				pm8001_ccb_task_free_done(pm8001_ha, task,
 								ccb, tag);
+				atomic_dec(&pm8001_ha_dev->running_req);
 				return 0;
 			}
 		}
-- 
2.16.3


  parent reply	other threads:[~2020-11-02 16:45 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-02 16:55 [PATCH V3 0/4] pm80xx updates Viswas G
2020-11-02 16:55 ` [PATCH V3 1/4] pm80xx: make mpi_build_cmd locking consistent Viswas G
2020-11-02 16:55 ` Viswas G [this message]
2020-11-02 16:55 ` [PATCH V3 3/4] pm80xx: Avoid busywait in FW ready check Viswas G
2020-11-02 16:55 ` [PATCH V3 4/4] pm80xx: make pm8001_mpi_get_nvmd_resp free of race condition Viswas G
2020-11-05  3:56 ` [PATCH V3 0/4] pm80xx updates Martin K. Petersen
2020-11-11  2:58 ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201102165528.26510-3-Viswas.G@microchip.com.com \
    --to=viswas.g@microchip.com.com \
    --cc=Ruksar.devadi@microchip.com \
    --cc=Vasanthalakshmi.Tharmarajan@microchip.com \
    --cc=Viswas.G@microchip.com \
    --cc=akshatzen@google.com \
    --cc=jinpu.wang@cloud.ionos.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=radha@google.com \
    --cc=vishakhavc@google.com \
    --cc=yuuzheng@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.