From: DENG Qingfang <dqfext@gmail.com>
To: netdev@vger.kernel.org
Cc: "Sean Wang" <sean.wang@mediatek.com>,
"Landen Chao" <landen.chao@mediatek.com>,
"Andrew Lunn" <andrew@lunn.ch>,
"Vivien Didelot" <vivien.didelot@gmail.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Vladimir Oltean" <olteanv@gmail.com>,
"David S . Miller" <davem@davemloft.net>,
"Jakub Kicinski" <kuba@kernel.org>,
"René van Dorst" <opensource@vdorst.com>,
"Chuanhong Guo" <gch981213@gmail.com>
Subject: [PATCH v3 net-next] net: dsa: mt7530: support setting MTU
Date: Tue, 3 Nov 2020 13:06:18 +0800 [thread overview]
Message-ID: <20201103050618.11419-1-dqfext@gmail.com> (raw)
MT7530/7531 has a global RX packet length register, which can be used
to set MTU.
Supported packet length values are 1522 (1518 if untagged), 1536,
1552, and multiple of 1024 (from 2048 to 15360).
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
v2 -> v3:
Fix checkpatch.pl warning
v1 -> v2:
Avoid duplication of mt7530_rmw()
Fix code wrapping
---
drivers/net/dsa/mt7530.c | 49 ++++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/mt7530.h | 12 ++++++++++
2 files changed, 61 insertions(+)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 771f58f50d61..6408402a44f5 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1021,6 +1021,53 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
mutex_unlock(&priv->reg_mutex);
}
+static int
+mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+ struct mt7530_priv *priv = ds->priv;
+ struct mii_bus *bus = priv->bus;
+ int length;
+ u32 val;
+
+ /* When a new MTU is set, DSA always set the CPU port's MTU to the
+ * largest MTU of the slave ports. Because the switch only has a global
+ * RX length register, only allowing CPU port here is enough.
+ */
+ if (!dsa_is_cpu_port(ds, port))
+ return 0;
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ val = mt7530_mii_read(priv, MT7530_GMACCR);
+ val &= ~MAX_RX_PKT_LEN_MASK;
+
+ /* RX length also includes Ethernet header, MTK tag, and FCS length */
+ length = new_mtu + ETH_HLEN + MTK_HDR_LEN + ETH_FCS_LEN;
+ if (length <= 1522) {
+ val |= MAX_RX_PKT_LEN_1522;
+ } else if (length <= 1536) {
+ val |= MAX_RX_PKT_LEN_1536;
+ } else if (length <= 1552) {
+ val |= MAX_RX_PKT_LEN_1552;
+ } else {
+ val &= ~MAX_RX_JUMBO_MASK;
+ val |= MAX_RX_JUMBO(DIV_ROUND_UP(length, 1024));
+ val |= MAX_RX_PKT_LEN_JUMBO;
+ }
+
+ mt7530_mii_write(priv, MT7530_GMACCR, val);
+
+ mutex_unlock(&bus->mdio_lock);
+
+ return 0;
+}
+
+static int
+mt7530_port_max_mtu(struct dsa_switch *ds, int port)
+{
+ return MT7530_MAX_MTU;
+}
+
static void
mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state)
{
@@ -2519,6 +2566,8 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
.get_sset_count = mt7530_get_sset_count,
.port_enable = mt7530_port_enable,
.port_disable = mt7530_port_disable,
+ .port_change_mtu = mt7530_port_change_mtu,
+ .port_max_mtu = mt7530_port_max_mtu,
.port_stp_state_set = mt7530_stp_state_set,
.port_bridge_join = mt7530_port_bridge_join,
.port_bridge_leave = mt7530_port_bridge_leave,
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 9278a8e3d04e..ee3523a7537e 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -11,6 +11,9 @@
#define MT7530_NUM_FDB_RECORDS 2048
#define MT7530_ALL_MEMBERS 0xff
+#define MTK_HDR_LEN 4
+#define MT7530_MAX_MTU (15 * 1024 - ETH_HLEN - ETH_FCS_LEN - MTK_HDR_LEN)
+
enum mt753x_id {
ID_MT7530 = 0,
ID_MT7621 = 1,
@@ -289,6 +292,15 @@ enum mt7530_vlan_port_attr {
#define MT7531_DBG_CNT(x) (0x3018 + (x) * 0x100)
#define MT7531_DIS_CLR BIT(31)
+#define MT7530_GMACCR 0x30e0
+#define MAX_RX_JUMBO(x) ((x) << 2)
+#define MAX_RX_JUMBO_MASK GENMASK(5, 2)
+#define MAX_RX_PKT_LEN_MASK GENMASK(1, 0)
+#define MAX_RX_PKT_LEN_1522 0x0
+#define MAX_RX_PKT_LEN_1536 0x1
+#define MAX_RX_PKT_LEN_1552 0x2
+#define MAX_RX_PKT_LEN_JUMBO 0x3
+
/* Register for MIB */
#define MT7530_PORT_MIB_COUNTER(x) (0x4000 + (x) * 0x100)
#define MT7530_MIB_CCR 0x4fe0
--
2.25.1
next reply other threads:[~2020-11-03 5:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-03 5:06 DENG Qingfang [this message]
2020-11-05 0:41 ` [PATCH v3 net-next] net: dsa: mt7530: support setting MTU Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201103050618.11419-1-dqfext@gmail.com \
--to=dqfext@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=gch981213@gmail.com \
--cc=kuba@kernel.org \
--cc=landen.chao@mediatek.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=opensource@vdorst.com \
--cc=sean.wang@mediatek.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.