All of lore.kernel.org
 help / color / mirror / Atom feed
From: Douglas Anderson <dianders@chromium.org>
To: jkosina@suse.cz, benjamin.tissoires@redhat.com,
	gregkh@linuxfoundation.org,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org, swboyd@chromium.org,
	andrea@borgia.bo.it, kai.heng.feng@canonical.com,
	hdegoede@redhat.com, robh+dt@kernel.org,
	Douglas Anderson <dianders@chromium.org>,
	Jiri Kosina <jikos@kernel.org>,
	Masahiro Yamada <masahiroy@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 4/4] HID: i2c-hid: Introduce goodix-i2c-hid as a subclass of i2c-hid
Date: Tue,  3 Nov 2020 17:29:29 -0800	[thread overview]
Message-ID: <20201103172824.v4.4.If41b7d621633b94d56653c6d53f5f89c5274de7b@changeid> (raw)
In-Reply-To: <20201104012929.3850691-1-dianders@chromium.org>

Goodix i2c-hid touchscreens are mostly i2c-hid compliant but have some
special power sequencing requirements, including the need to drive a
reset line during the sequencing.

Let's use the new ability of i2c-hid to have subclasses for power
sequencing to support the first Goodix i2c-hid touchscreen: GT7375P

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

Changes in v4:
- Totally redid based on the new subclass system.

Changes in v3:
- Rework to use subclassing.

 drivers/hid/i2c-hid/Kconfig             |  19 +++-
 drivers/hid/i2c-hid/Makefile            |   1 +
 drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 120 ++++++++++++++++++++++++
 3 files changed, 138 insertions(+), 2 deletions(-)
 create mode 100644 drivers/hid/i2c-hid/i2c-hid-of-goodix.c

diff --git a/drivers/hid/i2c-hid/Kconfig b/drivers/hid/i2c-hid/Kconfig
index 819b7521c182..a16c6a69680b 100644
--- a/drivers/hid/i2c-hid/Kconfig
+++ b/drivers/hid/i2c-hid/Kconfig
@@ -32,10 +32,25 @@ config I2C_HID_OF
 	  will be called i2c-hid-of.  It will also build/depend on the
 	  module i2c-hid.
 
+config I2C_HID_OF_GOODIX
+	tristate "Driver for Goodix hid-i2c based devices on OF systems"
+	default n
+	depends on I2C && INPUT && OF
+	help
+	  Say Y here if you want support for Goodix i2c devices that use
+	  the i2c-hid protocol on Open Firmware (Device Tree)-based
+	  systems.
+
+	  If unsure, say N.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-hid-of-goodix.  It will also build/depend on
+	  the module i2c-hid.
+
 endmenu
 
 config I2C_HID_CORE
 	tristate
-	default y if I2C_HID_ACPI=y || I2C_HID_OF=y
-	default m if I2C_HID_ACPI=m || I2C_HID_OF=m
+	default y if I2C_HID_ACPI=y || I2C_HID_OF=y || I2C_HID_OF_GOODIX=y
+	default m if I2C_HID_ACPI=m || I2C_HID_OF=m || I2C_HID_OF_GOODIX=m
 	select HID
diff --git a/drivers/hid/i2c-hid/Makefile b/drivers/hid/i2c-hid/Makefile
index 9b4a73446841..302545a771f3 100644
--- a/drivers/hid/i2c-hid/Makefile
+++ b/drivers/hid/i2c-hid/Makefile
@@ -10,3 +10,4 @@ i2c-hid-$(CONFIG_DMI)				+= i2c-hid-dmi-quirks.o
 
 obj-$(CONFIG_I2C_HID_ACPI)			+= i2c-hid-acpi.o
 obj-$(CONFIG_I2C_HID_OF)			+= i2c-hid-of.o
+obj-$(CONFIG_I2C_HID_OF_GOODIX)			+= i2c-hid-of-goodix.o
diff --git a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
new file mode 100644
index 000000000000..7b27fd8b7401
--- /dev/null
+++ b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Goodix touchscreens that use the i2c-hid protocol.
+ *
+ * Copyright 2020 Google LLC
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/regulator/consumer.h>
+
+#include "i2c-hid.h"
+
+struct goodix_i2c_hid_timing_data {
+	unsigned int post_gpio_reset_delay_ms;
+	unsigned int post_power_delay_ms;
+};
+
+struct i2c_hid_of_goodix {
+	struct i2chid_subclass_data subclass;
+
+	struct regulator *vdd;
+	struct gpio_desc *reset_gpio;
+	const struct goodix_i2c_hid_timing_data *timings;
+};
+
+static int goodix_i2c_hid_power_up_device(struct i2chid_subclass_data *subclass)
+{
+	struct i2c_hid_of_goodix *ihid_goodix =
+		container_of(subclass, struct i2c_hid_of_goodix, subclass);
+	int ret;
+
+	ret = regulator_enable(ihid_goodix->vdd);
+	if (ret)
+		return ret;
+
+	if (ihid_goodix->timings->post_power_delay_ms)
+		msleep(ihid_goodix->timings->post_power_delay_ms);
+
+	gpiod_set_value_cansleep(ihid_goodix->reset_gpio, 0);
+	if (ihid_goodix->timings->post_gpio_reset_delay_ms)
+		msleep(ihid_goodix->timings->post_gpio_reset_delay_ms);
+
+	return 0;
+}
+
+static void goodix_i2c_hid_power_down_device(struct i2chid_subclass_data *subclass)
+{
+	struct i2c_hid_of_goodix *ihid_goodix =
+		container_of(subclass, struct i2c_hid_of_goodix, subclass);
+
+	gpiod_set_value_cansleep(ihid_goodix->reset_gpio, 1);
+	regulator_disable(ihid_goodix->vdd);
+}
+
+static int i2c_hid_of_goodix_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct i2c_hid_of_goodix *ihid_goodix;
+
+	ihid_goodix = devm_kzalloc(&client->dev, sizeof(*ihid_goodix),
+				   GFP_KERNEL);
+	if (!ihid_goodix)
+		return -ENOMEM;
+
+	ihid_goodix->subclass.power_up_device = goodix_i2c_hid_power_up_device;
+	ihid_goodix->subclass.power_down_device = goodix_i2c_hid_power_down_device;
+
+	/* Start out with reset asserted */
+	ihid_goodix->reset_gpio =
+		devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ihid_goodix->reset_gpio))
+		return PTR_ERR(ihid_goodix->reset_gpio);
+
+	ihid_goodix->vdd = devm_regulator_get(&client->dev, "vdd");
+	if (IS_ERR(ihid_goodix->vdd))
+		return PTR_ERR(ihid_goodix->vdd);
+
+	ihid_goodix->timings = device_get_match_data(&client->dev);
+
+	return i2c_hid_core_probe(client, &ihid_goodix->subclass, 0x0001);
+}
+
+static const struct goodix_i2c_hid_timing_data goodix_gt7375p_timing_data = {
+	.post_power_delay_ms = 10,
+	.post_gpio_reset_delay_ms = 120,
+};
+
+static const struct of_device_id goodix_i2c_hid_of_match[] = {
+	{ .compatible = "goodix,gt7375p", .data = &goodix_gt7375p_timing_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, goodix_i2c_hid_of_match);
+
+static const struct dev_pm_ops goodix_i2c_hid_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(i2c_hid_core_suspend, i2c_hid_core_resume)
+};
+
+static struct i2c_driver goodix_i2c_hid_ts_driver = {
+	.driver = {
+		.name	= "i2c_hid_of_goodix",
+		.pm	= &goodix_i2c_hid_pm,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.of_match_table = of_match_ptr(goodix_i2c_hid_of_match),
+	},
+	.probe		= i2c_hid_of_goodix_probe,
+	.remove		= i2c_hid_core_remove,
+	.shutdown	= i2c_hid_core_shutdown,
+};
+module_i2c_driver(goodix_i2c_hid_ts_driver);
+
+MODULE_AUTHOR("Douglas Anderson <dianders@chromium.org>");
+MODULE_DESCRIPTION("Goodix i2c-hid touchscreen driver");
+MODULE_LICENSE("GPL v2");
-- 
2.29.1.341.ge80a0c044ae-goog


  parent reply	other threads:[~2020-11-04  1:30 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-04  1:29 [PATCH v4 0/4] HID: i2c-hid: Reorganize to allow supporting goodix,gt7375p Douglas Anderson
2020-11-04  1:29 ` [PATCH v4 0/4] HID: i2c-hid: Reorganize to allow supporting goodix, gt7375p Douglas Anderson
2020-11-04  1:29 ` [PATCH v4 1/4] HID: i2c-hid: Reorganize so ACPI and OF are subclasses Douglas Anderson
2020-11-04 12:07   ` Hans de Goede
2020-11-04 16:06     ` Doug Anderson
2020-11-09 11:24       ` Hans de Goede
2020-11-09 14:29         ` Benjamin Tissoires
2020-11-09 14:44           ` Hans de Goede
2020-11-09 21:38             ` Doug Anderson
2020-11-04  1:29 ` [PATCH v4 2/4] arm64: defconfig: Update config names for i2c-hid rejigger Douglas Anderson
2020-11-04  1:29   ` Douglas Anderson
2020-11-04  1:29 ` [PATCH v4 3/4] dt-bindings: HID: i2c-hid: Introduce bindings for the Goodix GT7375P Douglas Anderson
2020-11-05 22:34   ` Rob Herring
2020-11-04  1:29 ` Douglas Anderson [this message]
2020-11-04 12:09   ` [PATCH v4 4/4] HID: i2c-hid: Introduce goodix-i2c-hid as a subclass of i2c-hid Hans de Goede
2020-11-04 16:10     ` Doug Anderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201103172824.v4.4.If41b7d621633b94d56653c6d53f5f89c5274de7b@changeid \
    --to=dianders@chromium.org \
    --cc=andrea@borgia.bo.it \
    --cc=benjamin.tissoires@redhat.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=jikos@kernel.org \
    --cc=jkosina@suse.cz \
    --cc=kai.heng.feng@canonical.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=masahiroy@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.