From: Wong Vee Khee <vee.khee.wong@intel.com> To: Giuseppe Cavallaro <peppe.cavallaro@st.com>, Alexandre Torgue <alexandre.torgue@st.com>, Jose Abreu <joabreu@synopsys.com>, "David S . Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Ong Boon Leong <boon.leong.ong@intel.com>, Voon Wei Feng <weifeng.voon@intel.com>, Wong Vee Khee <vee.khee.wong@intel.com> Subject: [PATCH net-next 1/1] stmmac: intel: change all EHL/TGL to auto detect phy addr Date: Fri, 6 Nov 2020 17:43:41 +0800 [thread overview] Message-ID: <20201106094341.4241-1-vee.khee.wong@intel.com> (raw) From: Voon Weifeng <weifeng.voon@intel.com> Set all EHL/TGL phy_addr to -1 so that the driver will automatically detect it at run-time by probing all the possible 32 addresses. Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com> --- drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c index b6e5e3e36b63..7c1353f37247 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c @@ -236,6 +236,7 @@ static int intel_mgbe_common_data(struct pci_dev *pdev, int ret; int i; + plat->phy_addr = -1; plat->clk_csr = 5; plat->has_gmac = 0; plat->has_gmac4 = 1; @@ -345,7 +346,6 @@ static int ehl_sgmii_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 1; - plat->phy_addr = 0; plat->phy_interface = PHY_INTERFACE_MODE_SGMII; plat->serdes_powerup = intel_serdes_powerup; @@ -362,7 +362,6 @@ static int ehl_rgmii_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 1; - plat->phy_addr = 0; plat->phy_interface = PHY_INTERFACE_MODE_RGMII; return ehl_common_data(pdev, plat); @@ -376,7 +375,6 @@ static int ehl_pse0_common_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 2; - plat->phy_addr = 1; return ehl_common_data(pdev, plat); } @@ -408,7 +406,6 @@ static int ehl_pse1_common_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 3; - plat->phy_addr = 1; return ehl_common_data(pdev, plat); } @@ -450,7 +447,6 @@ static int tgl_sgmii_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 1; - plat->phy_addr = 0; plat->phy_interface = PHY_INTERFACE_MODE_SGMII; plat->serdes_powerup = intel_serdes_powerup; plat->serdes_powerdown = intel_serdes_powerdown; -- 2.17.0
WARNING: multiple messages have this Message-ID (diff)
From: Wong Vee Khee <vee.khee.wong@intel.com> To: Giuseppe Cavallaro <peppe.cavallaro@st.com>, Alexandre Torgue <alexandre.torgue@st.com>, Jose Abreu <joabreu@synopsys.com>, "David S . Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Voon Wei Feng <weifeng.voon@intel.com>, Wong Vee Khee <vee.khee.wong@intel.com>, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Ong Boon Leong <boon.leong.ong@intel.com>, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH net-next 1/1] stmmac: intel: change all EHL/TGL to auto detect phy addr Date: Fri, 6 Nov 2020 17:43:41 +0800 [thread overview] Message-ID: <20201106094341.4241-1-vee.khee.wong@intel.com> (raw) From: Voon Weifeng <weifeng.voon@intel.com> Set all EHL/TGL phy_addr to -1 so that the driver will automatically detect it at run-time by probing all the possible 32 addresses. Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com> --- drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c index b6e5e3e36b63..7c1353f37247 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c @@ -236,6 +236,7 @@ static int intel_mgbe_common_data(struct pci_dev *pdev, int ret; int i; + plat->phy_addr = -1; plat->clk_csr = 5; plat->has_gmac = 0; plat->has_gmac4 = 1; @@ -345,7 +346,6 @@ static int ehl_sgmii_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 1; - plat->phy_addr = 0; plat->phy_interface = PHY_INTERFACE_MODE_SGMII; plat->serdes_powerup = intel_serdes_powerup; @@ -362,7 +362,6 @@ static int ehl_rgmii_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 1; - plat->phy_addr = 0; plat->phy_interface = PHY_INTERFACE_MODE_RGMII; return ehl_common_data(pdev, plat); @@ -376,7 +375,6 @@ static int ehl_pse0_common_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 2; - plat->phy_addr = 1; return ehl_common_data(pdev, plat); } @@ -408,7 +406,6 @@ static int ehl_pse1_common_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 3; - plat->phy_addr = 1; return ehl_common_data(pdev, plat); } @@ -450,7 +447,6 @@ static int tgl_sgmii_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 1; - plat->phy_addr = 0; plat->phy_interface = PHY_INTERFACE_MODE_SGMII; plat->serdes_powerup = intel_serdes_powerup; plat->serdes_powerdown = intel_serdes_powerdown; -- 2.17.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-11-06 9:40 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-11-06 9:43 Wong Vee Khee [this message] 2020-11-06 9:43 ` [PATCH net-next 1/1] stmmac: intel: change all EHL/TGL to auto detect phy addr Wong Vee Khee 2020-11-08 0:20 ` patchwork-bot+netdevbpf 2020-11-08 0:20 ` patchwork-bot+netdevbpf 2021-01-16 9:12 ` Jan Kiszka 2021-01-16 9:12 ` Jan Kiszka 2021-01-17 0:59 ` Jakub Kicinski 2021-01-17 0:59 ` Jakub Kicinski 2021-01-17 14:28 ` Greg Kroah-Hartman 2021-01-17 14:28 ` Greg Kroah-Hartman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201106094341.4241-1-vee.khee.wong@intel.com \ --to=vee.khee.wong@intel.com \ --cc=alexandre.torgue@st.com \ --cc=boon.leong.ong@intel.com \ --cc=davem@davemloft.net \ --cc=joabreu@synopsys.com \ --cc=kuba@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=netdev@vger.kernel.org \ --cc=peppe.cavallaro@st.com \ --cc=weifeng.voon@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.