From: "Łukasz Stelmach" <l.stelmach@samsung.com> To: Andrew Lunn <andrew@lunn.ch>, jim.cromie@gmail.com, Heiner Kallweit <hkallweit1@gmail.com>, "David S. Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <krzk@kernel.org>, Russell King <linux@armlinux.org.uk>, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org Cc: "Bartłomiej Żolnierkiewicz" <b.zolnierkie@samsung.com>, "Marek Szyprowski" <m.szyprowski@samsung.com>, "Łukasz Stelmach" <l.stelmach@samsung.com>, "Rob Herring" <robh@kernel.org> Subject: [PATCH v6 2/5] dt-bindings: net: Add bindings for AX88796C SPI Ethernet Adapter Date: Thu, 12 Nov 2020 12:51:03 +0100 [thread overview] Message-ID: <20201112115106.16224-3-l.stelmach@samsung.com> (raw) In-Reply-To: <20201112115106.16224-1-l.stelmach@samsung.com> Add bindings for AX88796C SPI Ethernet Adapter. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../bindings/net/asix,ax88796c.yaml | 73 +++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/asix,ax88796c.yaml diff --git a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml new file mode 100644 index 000000000000..699ebf452479 --- /dev/null +++ b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/asix,ax88796c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASIX AX88796C SPI Ethernet Adapter + +maintainers: + - Łukasz Stelmach <l.stelmach@samsung.com> + +description: | + ASIX AX88796C is an Ethernet controller with a built in PHY. This + describes SPI mode of the chip. + + The node for this driver must be a child node of an SPI controller, + hence all mandatory properties described in + ../spi/spi-controller.yaml must be specified. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: asix,ax88796c + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 40000000 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + A GPIO line handling reset of the chip. As the line is active low, + it should be marked GPIO_ACTIVE_LOW. + maxItems: 1 + + local-mac-address: true + + mac-address: true + +required: + - compatible + - reg + - spi-max-frequency + - interrupts + - reset-gpios + +additionalProperties: false + +examples: + # Artik5 eval board + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@0 { + compatible = "asix,ax88796c"; + reg = <0x0>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + interrupt-parent = <&gpx2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <40000000>; + reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>; + }; + }; -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: "Łukasz Stelmach" <l.stelmach@samsung.com> To: Andrew Lunn <andrew@lunn.ch>, jim.cromie@gmail.com, Heiner Kallweit <hkallweit1@gmail.com>, "David S. Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <krzk@kernel.org>, Russell King <linux@armlinux.org.uk>, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org Cc: "Rob Herring" <robh@kernel.org>, "Marek Szyprowski" <m.szyprowski@samsung.com>, "Łukasz Stelmach" <l.stelmach@samsung.com>, "Bartłomiej Żolnierkiewicz" <b.zolnierkie@samsung.com> Subject: [PATCH v6 2/5] dt-bindings: net: Add bindings for AX88796C SPI Ethernet Adapter Date: Thu, 12 Nov 2020 12:51:03 +0100 [thread overview] Message-ID: <20201112115106.16224-3-l.stelmach@samsung.com> (raw) In-Reply-To: <20201112115106.16224-1-l.stelmach@samsung.com> Add bindings for AX88796C SPI Ethernet Adapter. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../bindings/net/asix,ax88796c.yaml | 73 +++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/asix,ax88796c.yaml diff --git a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml new file mode 100644 index 000000000000..699ebf452479 --- /dev/null +++ b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/asix,ax88796c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASIX AX88796C SPI Ethernet Adapter + +maintainers: + - Łukasz Stelmach <l.stelmach@samsung.com> + +description: | + ASIX AX88796C is an Ethernet controller with a built in PHY. This + describes SPI mode of the chip. + + The node for this driver must be a child node of an SPI controller, + hence all mandatory properties described in + ../spi/spi-controller.yaml must be specified. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: asix,ax88796c + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 40000000 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + A GPIO line handling reset of the chip. As the line is active low, + it should be marked GPIO_ACTIVE_LOW. + maxItems: 1 + + local-mac-address: true + + mac-address: true + +required: + - compatible + - reg + - spi-max-frequency + - interrupts + - reset-gpios + +additionalProperties: false + +examples: + # Artik5 eval board + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@0 { + compatible = "asix,ax88796c"; + reg = <0x0>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + interrupt-parent = <&gpx2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <40000000>; + reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>; + }; + }; -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-12 11:54 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <CGME20201112115107eucas1p1abe7589e6caffc579c22d39395f1efa0@eucas1p1.samsung.com> 2020-11-12 11:51 ` [PATCH v6 0/5] AX88796C SPI Ethernet Adapter Łukasz Stelmach 2020-11-12 11:51 ` Łukasz Stelmach [not found] ` <CGME20201112115108eucas1p1de47b5b010868d039759c0042ba5faaf@eucas1p1.samsung.com> 2020-11-12 11:51 ` [PATCH v6 1/5] dt-bindings: vendor-prefixes: Add asix prefix Łukasz Stelmach 2020-11-12 11:51 ` Łukasz Stelmach [not found] ` <CGME20201112115108eucas1p1857507fc2d994eca6ee6b1b86b87cfd5@eucas1p1.samsung.com> 2020-11-12 11:51 ` Łukasz Stelmach [this message] 2020-11-12 11:51 ` [PATCH v6 2/5] dt-bindings: net: Add bindings for AX88796C SPI Ethernet Adapter Łukasz Stelmach [not found] ` <CGME20201112115108eucas1p22790c6cdec17e5322424e026b3985305@eucas1p2.samsung.com> 2020-11-12 11:51 ` [PATCH v6 3/5] net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver Łukasz Stelmach 2020-11-12 11:51 ` Łukasz Stelmach 2020-11-13 20:35 ` Jakub Kicinski 2020-11-13 20:35 ` Jakub Kicinski [not found] ` <CGME20201116153345eucas1p24790148b7fd52a7ae1c055cc7b832bd7@eucas1p2.samsung.com> 2020-11-16 15:33 ` Lukasz Stelmach 2020-11-16 15:33 ` Lukasz Stelmach 2020-11-16 17:46 ` Jakub Kicinski 2020-11-16 17:46 ` Jakub Kicinski [not found] ` <CGME20201112115109eucas1p2dfd5fbfd76c28ef07f637bcc40f420cd@eucas1p2.samsung.com> 2020-11-12 11:51 ` [PATCH v6 4/5] ARM: dts: exynos: Add Ethernet to Artik 5 board Łukasz Stelmach 2020-11-12 11:51 ` Łukasz Stelmach [not found] ` <CGME20201112115109eucas1p190980b0cfd73d205d5fbc1b9bdd97214@eucas1p1.samsung.com> 2020-11-12 11:51 ` [PATCH v6 5/5] ARM: defconfig: Enable ax88796c driver Łukasz Stelmach 2020-11-12 11:51 ` Łukasz Stelmach 2020-11-12 11:53 ` [PATCH v6 0/5] AX88796C SPI Ethernet Adapter Krzysztof Kozlowski 2020-11-12 11:53 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201112115106.16224-3-l.stelmach@samsung.com \ --to=l.stelmach@samsung.com \ --cc=andrew@lunn.ch \ --cc=b.zolnierkie@samsung.com \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=hkallweit1@gmail.com \ --cc=jim.cromie@gmail.com \ --cc=kgene@kernel.org \ --cc=krzk@kernel.org \ --cc=kuba@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=m.szyprowski@samsung.com \ --cc=netdev@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=robh@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.