From: Amjad Ouled-Ameur <aouledameur@baylibre.com> To: Kevin Hilman <khilman@baylibre.com> Cc: Amjad Ouled-Ameur <aouledameur@baylibre.com>, Philipp Zabel <p.zabel@pengutronix.de>, Felipe Balbi <balbi@kernel.org>, Jerome Brunet <jbrunet@baylibre.com>, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org Subject: [PATCH 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use Date: Fri, 13 Nov 2020 01:05:06 +0100 [thread overview] Message-ID: <20201113000508.14702-2-aouledameur@baylibre.com> (raw) In-Reply-To: <20201113000508.14702-1-aouledameur@baylibre.com> Use reset_control_rearm() call if an error occurs in case phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used and the reset line may be triggered again by other devices. reset_control_rearm() keeps use of triggered_count sane in the reset framework. Therefore, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm(). Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> Reported-by: Jerome Brunet <jbrunet@baylibre.com> --- Important: Please DO NOT merge before this patch [0] is merged, it adds reset_control_rearm() call to the reset framework API. [0] https://lore.kernel.org/lkml/20201112230043.28987-1-aouledameur@baylib re.com/ drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c index 43ec9bf24abf..e366c0b1e339 100644 --- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c +++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c @@ -114,8 +114,10 @@ static int phy_meson_gxl_usb2_init(struct phy *phy) return ret; ret = clk_prepare_enable(priv->clk); - if (ret) + if (ret) { + reset_control_rearm(priv->reset); return ret; + } return 0; } @@ -124,6 +126,7 @@ static int phy_meson_gxl_usb2_exit(struct phy *phy) { struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy); + reset_control_rearm(priv->reset); clk_disable_unprepare(priv->clk); return 0; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Amjad Ouled-Ameur <aouledameur@baylibre.com> To: Kevin Hilman <khilman@baylibre.com> Cc: Felipe Balbi <balbi@kernel.org>, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, Amjad Ouled-Ameur <aouledameur@baylibre.com>, Philipp Zabel <p.zabel@pengutronix.de>, linux-amlogic@lists.infradead.org, Jerome Brunet <jbrunet@baylibre.com> Subject: [PATCH 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use Date: Fri, 13 Nov 2020 01:05:06 +0100 [thread overview] Message-ID: <20201113000508.14702-2-aouledameur@baylibre.com> (raw) In-Reply-To: <20201113000508.14702-1-aouledameur@baylibre.com> Use reset_control_rearm() call if an error occurs in case phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used and the reset line may be triggered again by other devices. reset_control_rearm() keeps use of triggered_count sane in the reset framework. Therefore, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm(). Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> Reported-by: Jerome Brunet <jbrunet@baylibre.com> --- Important: Please DO NOT merge before this patch [0] is merged, it adds reset_control_rearm() call to the reset framework API. [0] https://lore.kernel.org/lkml/20201112230043.28987-1-aouledameur@baylib re.com/ drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c index 43ec9bf24abf..e366c0b1e339 100644 --- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c +++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c @@ -114,8 +114,10 @@ static int phy_meson_gxl_usb2_init(struct phy *phy) return ret; ret = clk_prepare_enable(priv->clk); - if (ret) + if (ret) { + reset_control_rearm(priv->reset); return ret; + } return 0; } @@ -124,6 +126,7 @@ static int phy_meson_gxl_usb2_exit(struct phy *phy) { struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy); + reset_control_rearm(priv->reset); clk_disable_unprepare(priv->clk); return 0; -- 2.17.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2020-11-13 0:06 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-11-13 0:05 [PATCH 0/3] usb: meson: fix shared reset control use Amjad Ouled-Ameur 2020-11-13 0:05 ` Amjad Ouled-Ameur 2020-11-13 0:05 ` Amjad Ouled-Ameur [this message] 2020-11-13 0:05 ` [PATCH 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use Amjad Ouled-Ameur 2020-11-14 19:13 ` Martin Blumenstingl 2020-11-14 19:13 ` Martin Blumenstingl 2020-11-17 9:16 ` Amjad Ouled-Ameur 2020-11-17 9:16 ` Amjad Ouled-Ameur 2020-11-13 0:05 ` [PATCH 2/3] usb: dwc3: meson-g12a: fix shared reset control use Amjad Ouled-Ameur 2020-11-13 0:05 ` Amjad Ouled-Ameur 2020-11-13 0:05 ` [PATCH 3/3] phy: amlogic: meson8b-usb2: " Amjad Ouled-Ameur 2020-11-13 0:05 ` Amjad Ouled-Ameur 2020-11-14 19:11 ` Martin Blumenstingl 2020-11-14 19:11 ` Martin Blumenstingl 2020-11-17 9:13 ` Amjad Ouled-Ameur 2020-11-17 9:13 ` Amjad Ouled-Ameur 2020-11-23 9:29 ` [PATCH 0/3] usb: meson: " Amjad Ouled-Ameur 2020-11-23 9:29 ` Amjad Ouled-Ameur 2020-12-01 0:05 ` Kevin Hilman 2020-12-01 0:05 ` Kevin Hilman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201113000508.14702-2-aouledameur@baylibre.com \ --to=aouledameur@baylibre.com \ --cc=balbi@kernel.org \ --cc=jbrunet@baylibre.com \ --cc=khilman@baylibre.com \ --cc=linux-amlogic@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=p.zabel@pengutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.