From: Dmitry Osipenko <digetx@gmail.com>
To: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Dan Murphy <dmurphy@ti.com>, Sebastian Reichel <sre@kernel.org>
Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v7 2/4] mfd: Add driver for Embedded Controller found on Acer Iconia Tab A500
Date: Mon, 16 Nov 2020 22:48:25 +0300 [thread overview]
Message-ID: <20201116194827.28947-3-digetx@gmail.com> (raw)
In-Reply-To: <20201116194827.28947-1-digetx@gmail.com>
Acer Iconia Tab A500 is an Android tablet device, it has ENE KB930
Embedded Controller which provides battery-gauge, LED, GPIO and some
other functions. The EC uses firmware that is specifically customized
for Acer A500. This patch adds MFD driver for the Embedded Controller
which allows to power-off / reboot the A500 device, it also provides
a common register read/write API that will be used by the sub-devices.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/mfd/Kconfig | 11 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/acer-ec-a500.c | 202 +++++++++++++++++++++++++++++++++++++
3 files changed, 214 insertions(+)
create mode 100644 drivers/mfd/acer-ec-a500.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index cc0b73280c68..9c6c451dd416 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2107,6 +2107,17 @@ config MFD_KHADAS_MCU
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_ACER_A500_EC
+ tristate "Support for Acer Iconia Tab A500 Embedded Controller"
+ depends on I2C
+ depends on (ARCH_TEGRA_2x_SOC && OF) || COMPILE_TEST
+ select MFD_CORE
+ select REGMAP
+ help
+ Support for Embedded Controller found on Acer Iconia Tab A500.
+ The controller itself is ENE KB930, it is running firmware
+ customized for the specific needs of the Acer A500 hardware.
+
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 14fdb188af02..025543418835 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -264,6 +264,7 @@ obj-$(CONFIG_MFD_ROHM_BD71828) += rohm-bd71828.o
obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
obj-$(CONFIG_MFD_STMFX) += stmfx.o
obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
+obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
diff --git a/drivers/mfd/acer-ec-a500.c b/drivers/mfd/acer-ec-a500.c
new file mode 100644
index 000000000000..80c2fdd14fc4
--- /dev/null
+++ b/drivers/mfd/acer-ec-a500.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Acer Iconia Tab A500 Embedded Controller Driver
+ *
+ * Copyright 2020 GRATE-driver project
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+#define A500_EC_I2C_ERR_TIMEOUT 500
+#define A500_EC_POWER_CMD_TIMEOUT 1000
+
+/*
+ * Controller's firmware expects specific command opcodes to be used for the
+ * corresponding registers. Unsupported commands are skipped by the firmware.
+ */
+#define CMD_SHUTDOWN 0x0
+#define CMD_WARM_REBOOT 0x0
+#define CMD_COLD_REBOOT 0x1
+
+enum {
+ REG_CURRENT_NOW = 0x03,
+ REG_SHUTDOWN = 0x52,
+ REG_WARM_REBOOT = 0x54,
+ REG_COLD_REBOOT = 0x55,
+};
+
+static struct i2c_client *a500_ec_client_pm_off;
+
+static int a500_ec_read(void *context, const void *reg_buf, size_t reg_size,
+ void *val_buf, size_t val_sizel)
+{
+ struct i2c_client *client = context;
+ unsigned int reg, retries = 5;
+ u16 *ret_val = val_buf;
+ s32 ret = 0;
+
+ reg = *(u8 *)reg_buf;
+
+ while (retries-- > 0) {
+ ret = i2c_smbus_read_word_data(client, reg);
+ if (ret >= 0)
+ break;
+
+ msleep(A500_EC_I2C_ERR_TIMEOUT);
+ }
+
+ if (ret < 0) {
+ dev_err(&client->dev, "read 0x%x failed: %d\n", reg, ret);
+ return ret;
+ }
+
+ *ret_val = ret;
+
+ if (reg == REG_CURRENT_NOW)
+ fsleep(10000);
+
+ return 0;
+}
+
+static int a500_ec_write(void *context, const void *data, size_t count)
+{
+ struct i2c_client *client = context;
+ unsigned int reg, val, retries = 5;
+ s32 ret = 0;
+
+ reg = *(u8 *)(data + 0);
+ val = *(u16 *)(data + 1);
+
+ while (retries-- > 0) {
+ ret = i2c_smbus_write_word_data(client, reg, val);
+ if (ret >= 0)
+ break;
+
+ msleep(A500_EC_I2C_ERR_TIMEOUT);
+ }
+
+ if (ret < 0) {
+ dev_err(&client->dev, "write 0x%x failed: %d\n", reg, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct regmap_config a500_ec_regmap_config = {
+ .name = "KB930",
+ .reg_bits = 8,
+ .val_bits = 16,
+ .max_register = 0xff,
+};
+
+static const struct regmap_bus a500_ec_regmap_bus = {
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .val_format_endian_default = REGMAP_ENDIAN_LITTLE,
+ .write = a500_ec_write,
+ .read = a500_ec_read,
+ .max_raw_read = 2,
+};
+
+static void a500_ec_poweroff(void)
+{
+ i2c_smbus_write_word_data(a500_ec_client_pm_off,
+ REG_SHUTDOWN, CMD_SHUTDOWN);
+
+ mdelay(A500_EC_POWER_CMD_TIMEOUT);
+}
+
+static int a500_ec_restart_notify(struct notifier_block *this,
+ unsigned long reboot_mode, void *data)
+{
+ if (reboot_mode == REBOOT_WARM)
+ i2c_smbus_write_word_data(a500_ec_client_pm_off,
+ REG_WARM_REBOOT, CMD_WARM_REBOOT);
+ else
+ i2c_smbus_write_word_data(a500_ec_client_pm_off,
+ REG_COLD_REBOOT, CMD_COLD_REBOOT);
+
+ mdelay(A500_EC_POWER_CMD_TIMEOUT);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block a500_ec_restart_handler = {
+ .notifier_call = a500_ec_restart_notify,
+ .priority = 200,
+};
+
+static const struct mfd_cell a500_ec_cells[] = {
+ { .name = "acer-a500-iconia-battery", },
+ { .name = "acer-a500-iconia-leds", },
+};
+
+static int a500_ec_probe(struct i2c_client *client)
+{
+ struct regmap *regmap;
+ int err;
+
+ regmap = devm_regmap_init(&client->dev, &a500_ec_regmap_bus,
+ client, &a500_ec_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ err = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO,
+ a500_ec_cells, ARRAY_SIZE(a500_ec_cells),
+ NULL, 0, NULL);
+ if (err) {
+ dev_err(&client->dev, "failed to add sub-devices: %d\n", err);
+ return err;
+ }
+
+ if (of_device_is_system_power_controller(client->dev.of_node)) {
+ a500_ec_client_pm_off = client;
+
+ err = register_restart_handler(&a500_ec_restart_handler);
+ if (err)
+ return err;
+
+ if (!pm_power_off)
+ pm_power_off = a500_ec_poweroff;
+ }
+
+ return 0;
+}
+
+static int a500_ec_remove(struct i2c_client *client)
+{
+ if (of_device_is_system_power_controller(client->dev.of_node)) {
+ if (pm_power_off == a500_ec_poweroff)
+ pm_power_off = NULL;
+
+ unregister_restart_handler(&a500_ec_restart_handler);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id a500_ec_match[] = {
+ { .compatible = "acer,a500-iconia-ec" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, a500_ec_match);
+
+static struct i2c_driver a500_ec_driver = {
+ .driver = {
+ .name = "acer-a500-embedded-controller",
+ .of_match_table = a500_ec_match,
+ },
+ .probe_new = a500_ec_probe,
+ .remove = a500_ec_remove,
+};
+module_i2c_driver(a500_ec_driver);
+
+MODULE_DESCRIPTION("Acer Iconia Tab A500 Embedded Controller driver");
+MODULE_AUTHOR("Dmitry Osipenko <digetx@gmail.com>");
+MODULE_LICENSE("GPL");
--
2.29.2
next prev parent reply other threads:[~2020-11-16 19:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-16 19:48 [PATCH v7 0/4] Introduce Embedded Controller driver for Acer A500 Dmitry Osipenko
2020-11-16 19:48 ` [PATCH v7 1/4] dt-bindings: mfd: Add ENE KB930 Embedded Controller binding Dmitry Osipenko
2020-11-16 19:48 ` Dmitry Osipenko [this message]
2020-11-16 19:48 ` [PATCH v7 3/4] power: supply: Add battery gauge driver for Acer Iconia Tab A500 Dmitry Osipenko
2020-11-16 19:48 ` [PATCH v7 4/4] ARM: tegra: acer-a500: Add Embedded Controller Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201116194827.28947-3-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=jonathanh@nvidia.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.