All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wenbin Mei <wenbin.mei@mediatek.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Chaotian Jing <chaotian.jing@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	<linux-mmc@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <srv_heupstream@mediatek.com>,
	Wenbin Mei <wenbin.mei@mediatek.com>
Subject: [PATCH] mmc: mediatek: Add system suspend/resume interface
Date: Wed, 18 Nov 2020 14:34:05 +0800	[thread overview]
Message-ID: <20201118063405.24906-1-wenbin.mei@mediatek.com> (raw)

Before we got these errors on MT8192 platform:
[   59.153891] Restarting tasks ...
[   59.154540] done.
[   59.159175] PM: suspend exit
[   59.218724] mtk-msdc 11f60000.mmc: phase: [map:fffffffe] [maxlen:31]
[final:16]
[  119.776083] mmc0: cqhci: timeout for tag 9
[  119.780196] mmc0: cqhci: ============ CQHCI REGISTER DUMP ===========
[  119.786709] mmc0: cqhci: Caps:      0x100020b6 | Version:  0x00000510
[  119.793225] mmc0: cqhci: Config:    0x00000101 | Control:  0x00000000
[  119.799706] mmc0: cqhci: Int stat:  0x00000000 | Int enab: 0x00000000
[  119.806177] mmc0: cqhci: Int sig:   0x00000000 | Int Coal: 0x00000000
[  119.812670] mmc0: cqhci: TDL base:  0x00000000 | TDL up32: 0x00000000
[  119.819149] mmc0: cqhci: Doorbell:  0x003ffc00 | TCN:      0x00000200
[  119.825656] mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000
[  119.832155] mmc0: cqhci: Task clr:  0x00000000 | SSC1:     0x00001000
[  119.838627] mmc0: cqhci: SSC2:      0x00000000 | DCMD rsp: 0x00000000
[  119.845174] mmc0: cqhci: RED mask:  0xfdf9a080 | TERRI:    0x0000891c
[  119.851654] mmc0: cqhci: Resp idx:  0x00000000 | Resp arg: 0x00000000
[  119.865773] mmc0: cqhci: : ===========================================
[  119.872358] mmc0: running CQE recovery
From these logs, we found TDL base was back to the default value.

After suspend, the mmc host is powered off by HW, and bring CQE register
to the default value, so we add system suspend/resume interface, then bring
CQE to deactivated state before suspend, it will be enabled by CQE first
request after resume.

Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index fc5ee5df91ad..c5f9cd6fc951 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -2758,11 +2758,29 @@ static int msdc_runtime_resume(struct device *dev)
 	msdc_restore_reg(host);
 	return 0;
 }
+
+static int msdc_sys_suspend(struct device *dev)
+{
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	int ret;
+
+	if (mmc->caps2 & MMC_CAP2_CQE) {
+		ret = cqhci_suspend(mmc);
+		if (ret)
+			return ret;
+	}
+
+	return pm_runtime_force_suspend(dev);
+}
+
+static int msdc_sys_resume(struct device *dev)
+{
+	return pm_runtime_force_resume(dev);
+}
 #endif
 
 static const struct dev_pm_ops msdc_dev_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
-				pm_runtime_force_resume)
+	SET_SYSTEM_SLEEP_PM_OPS(msdc_sys_suspend, msdc_sys_resume)
 	SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
 };
 
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Wenbin Mei <wenbin.mei@mediatek.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Wenbin Mei <wenbin.mei@mediatek.com>,
	srv_heupstream@mediatek.com, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
	Chaotian Jing <chaotian.jing@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] mmc: mediatek: Add system suspend/resume interface
Date: Wed, 18 Nov 2020 14:34:05 +0800	[thread overview]
Message-ID: <20201118063405.24906-1-wenbin.mei@mediatek.com> (raw)

Before we got these errors on MT8192 platform:
[   59.153891] Restarting tasks ...
[   59.154540] done.
[   59.159175] PM: suspend exit
[   59.218724] mtk-msdc 11f60000.mmc: phase: [map:fffffffe] [maxlen:31]
[final:16]
[  119.776083] mmc0: cqhci: timeout for tag 9
[  119.780196] mmc0: cqhci: ============ CQHCI REGISTER DUMP ===========
[  119.786709] mmc0: cqhci: Caps:      0x100020b6 | Version:  0x00000510
[  119.793225] mmc0: cqhci: Config:    0x00000101 | Control:  0x00000000
[  119.799706] mmc0: cqhci: Int stat:  0x00000000 | Int enab: 0x00000000
[  119.806177] mmc0: cqhci: Int sig:   0x00000000 | Int Coal: 0x00000000
[  119.812670] mmc0: cqhci: TDL base:  0x00000000 | TDL up32: 0x00000000
[  119.819149] mmc0: cqhci: Doorbell:  0x003ffc00 | TCN:      0x00000200
[  119.825656] mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000
[  119.832155] mmc0: cqhci: Task clr:  0x00000000 | SSC1:     0x00001000
[  119.838627] mmc0: cqhci: SSC2:      0x00000000 | DCMD rsp: 0x00000000
[  119.845174] mmc0: cqhci: RED mask:  0xfdf9a080 | TERRI:    0x0000891c
[  119.851654] mmc0: cqhci: Resp idx:  0x00000000 | Resp arg: 0x00000000
[  119.865773] mmc0: cqhci: : ===========================================
[  119.872358] mmc0: running CQE recovery
From these logs, we found TDL base was back to the default value.

After suspend, the mmc host is powered off by HW, and bring CQE register
to the default value, so we add system suspend/resume interface, then bring
CQE to deactivated state before suspend, it will be enabled by CQE first
request after resume.

Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index fc5ee5df91ad..c5f9cd6fc951 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -2758,11 +2758,29 @@ static int msdc_runtime_resume(struct device *dev)
 	msdc_restore_reg(host);
 	return 0;
 }
+
+static int msdc_sys_suspend(struct device *dev)
+{
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	int ret;
+
+	if (mmc->caps2 & MMC_CAP2_CQE) {
+		ret = cqhci_suspend(mmc);
+		if (ret)
+			return ret;
+	}
+
+	return pm_runtime_force_suspend(dev);
+}
+
+static int msdc_sys_resume(struct device *dev)
+{
+	return pm_runtime_force_resume(dev);
+}
 #endif
 
 static const struct dev_pm_ops msdc_dev_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
-				pm_runtime_force_resume)
+	SET_SYSTEM_SLEEP_PM_OPS(msdc_sys_suspend, msdc_sys_resume)
 	SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
 };
 
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Wenbin Mei <wenbin.mei@mediatek.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Wenbin Mei <wenbin.mei@mediatek.com>,
	srv_heupstream@mediatek.com, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
	Chaotian Jing <chaotian.jing@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] mmc: mediatek: Add system suspend/resume interface
Date: Wed, 18 Nov 2020 14:34:05 +0800	[thread overview]
Message-ID: <20201118063405.24906-1-wenbin.mei@mediatek.com> (raw)

Before we got these errors on MT8192 platform:
[   59.153891] Restarting tasks ...
[   59.154540] done.
[   59.159175] PM: suspend exit
[   59.218724] mtk-msdc 11f60000.mmc: phase: [map:fffffffe] [maxlen:31]
[final:16]
[  119.776083] mmc0: cqhci: timeout for tag 9
[  119.780196] mmc0: cqhci: ============ CQHCI REGISTER DUMP ===========
[  119.786709] mmc0: cqhci: Caps:      0x100020b6 | Version:  0x00000510
[  119.793225] mmc0: cqhci: Config:    0x00000101 | Control:  0x00000000
[  119.799706] mmc0: cqhci: Int stat:  0x00000000 | Int enab: 0x00000000
[  119.806177] mmc0: cqhci: Int sig:   0x00000000 | Int Coal: 0x00000000
[  119.812670] mmc0: cqhci: TDL base:  0x00000000 | TDL up32: 0x00000000
[  119.819149] mmc0: cqhci: Doorbell:  0x003ffc00 | TCN:      0x00000200
[  119.825656] mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000
[  119.832155] mmc0: cqhci: Task clr:  0x00000000 | SSC1:     0x00001000
[  119.838627] mmc0: cqhci: SSC2:      0x00000000 | DCMD rsp: 0x00000000
[  119.845174] mmc0: cqhci: RED mask:  0xfdf9a080 | TERRI:    0x0000891c
[  119.851654] mmc0: cqhci: Resp idx:  0x00000000 | Resp arg: 0x00000000
[  119.865773] mmc0: cqhci: : ===========================================
[  119.872358] mmc0: running CQE recovery
From these logs, we found TDL base was back to the default value.

After suspend, the mmc host is powered off by HW, and bring CQE register
to the default value, so we add system suspend/resume interface, then bring
CQE to deactivated state before suspend, it will be enabled by CQE first
request after resume.

Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index fc5ee5df91ad..c5f9cd6fc951 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -2758,11 +2758,29 @@ static int msdc_runtime_resume(struct device *dev)
 	msdc_restore_reg(host);
 	return 0;
 }
+
+static int msdc_sys_suspend(struct device *dev)
+{
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	int ret;
+
+	if (mmc->caps2 & MMC_CAP2_CQE) {
+		ret = cqhci_suspend(mmc);
+		if (ret)
+			return ret;
+	}
+
+	return pm_runtime_force_suspend(dev);
+}
+
+static int msdc_sys_resume(struct device *dev)
+{
+	return pm_runtime_force_resume(dev);
+}
 #endif
 
 static const struct dev_pm_ops msdc_dev_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
-				pm_runtime_force_resume)
+	SET_SYSTEM_SLEEP_PM_OPS(msdc_sys_suspend, msdc_sys_resume)
 	SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
 };
 
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-11-18  6:34 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-18  6:34 Wenbin Mei [this message]
2020-11-18  6:34 ` [PATCH] mmc: mediatek: Add system suspend/resume interface Wenbin Mei
2020-11-18  6:34 ` Wenbin Mei
2020-11-23 16:06 ` Ulf Hansson
2020-11-23 16:06   ` Ulf Hansson
2020-11-23 16:06   ` Ulf Hansson
2020-11-25  1:10   ` Wenbin Mei
2020-11-25  1:10     ` Wenbin Mei
2020-11-25  1:10     ` Wenbin Mei
2020-12-03  1:29     ` Nicolas Boichat
2020-12-03  1:29       ` Nicolas Boichat
2020-12-03  1:29       ` Nicolas Boichat
2020-12-04 15:07       ` Ulf Hansson
2020-12-04 15:07         ` Ulf Hansson
2020-12-04 15:07         ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201118063405.24906-1-wenbin.mei@mediatek.com \
    --to=wenbin.mei@mediatek.com \
    --cc=chaotian.jing@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.