All of lore.kernel.org
 help / color / mirror / Atom feed
From: DENG Qingfang <dqfext@gmail.com>
To: netdev@vger.kernel.org, Felix Fietkau <nbd@nbd.name>,
	John Crispin <john@phrozen.org>,
	Sean Wang <sean.wang@mediatek.com>,
	Mark Lee <Mark-MC.Lee@mediatek.com>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Cc: Frank Wunderlich <frank-w@public-files.de>,
	David Woodhouse <dwmw2@infradead.org>,
	Andrew Lunn <andrew@lunn.ch>,
	Rene van Dorst <opensource@vdorst.com>
Subject: [PATCH net-next] net: ethernet: mediatek: support setting MTU
Date: Mon, 23 Nov 2020 11:45:22 +0800	[thread overview]
Message-ID: <20201123034522.1268-1-dqfext@gmail.com> (raw)

MT762x HW, except for MT7628, supports frame length up to 2048
(maximum length on GDM), so allow setting MTU up to 2030.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 36 ++++++++++++++++++++-
 drivers/net/ethernet/mediatek/mtk_eth_soc.h | 11 +++++--
 2 files changed, 43 insertions(+), 4 deletions(-)

Changes RFC -> v1:
	Exclude MT7628

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 6d2d60675ffd..27cae3f43972 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -353,7 +353,7 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
 	/* Setup gmac */
 	mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
 	mcr_new = mcr_cur;
-	mcr_new |= MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
+	mcr_new |= MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
 		   MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK;
 
 	/* Only update control register when needed! */
@@ -2499,6 +2499,39 @@ static void mtk_uninit(struct net_device *dev)
 	mtk_rx_irq_disable(eth, ~0);
 }
 
+static int mtk_change_mtu(struct net_device *dev, int new_mtu)
+{
+	int length = new_mtu + MTK_RX_ETH_HLEN;
+	struct mtk_mac *mac = netdev_priv(dev);
+	struct mtk_eth *eth = mac->hw;
+	u32 mcr_cur, mcr_new;
+
+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) {
+		if (length > 1536)
+			return -EINVAL;
+	} else {
+		mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
+		mcr_new = mcr_cur & ~MAC_MCR_MAX_RX_LEN_MASK;
+
+		if (length <= 1518)
+			mcr_new |= MAC_MCR_MAX_RX_LEN(MAC_MCR_MAX_RX_LEN_1518);
+		else if (length <= 1536)
+			mcr_new |= MAC_MCR_MAX_RX_LEN(MAC_MCR_MAX_RX_LEN_1536);
+		else if (length <= 1552)
+			mcr_new |= MAC_MCR_MAX_RX_LEN(MAC_MCR_MAX_RX_LEN_1552);
+		else
+			mcr_new |= MAC_MCR_MAX_RX_LEN(MAC_MCR_MAX_RX_LEN_2048);
+
+		/* Only update control register when needed! */
+		if (mcr_new != mcr_cur)
+			mtk_w32(mac->hw, mcr_new, MTK_MAC_MCR(mac->id));
+	}
+
+	dev->mtu = new_mtu;
+
+	return 0;
+}
+
 static int mtk_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	struct mtk_mac *mac = netdev_priv(dev);
@@ -2795,6 +2828,7 @@ static const struct net_device_ops mtk_netdev_ops = {
 	.ndo_set_mac_address	= mtk_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= mtk_do_ioctl,
+	.ndo_change_mtu		= mtk_change_mtu,
 	.ndo_tx_timeout		= mtk_tx_timeout,
 	.ndo_get_stats64        = mtk_get_stats64,
 	.ndo_fix_features	= mtk_fix_features,
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 454cfcd465fd..cfc11654ccd6 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -17,12 +17,12 @@
 #include <linux/phylink.h>
 
 #define MTK_QDMA_PAGE_SIZE	2048
-#define	MTK_MAX_RX_LENGTH	1536
+#define MTK_MAX_RX_LENGTH	2048
 #define MTK_TX_DMA_BUF_LEN	0x3fff
 #define MTK_DMA_SIZE		256
 #define MTK_NAPI_WEIGHT		64
 #define MTK_MAC_COUNT		2
-#define MTK_RX_ETH_HLEN		(VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
+#define MTK_RX_ETH_HLEN		(ETH_HLEN + ETH_FCS_LEN)
 #define MTK_RX_HLEN		(NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN)
 #define MTK_DMA_DUMMY_DESC	0xffffffff
 #define MTK_DEFAULT_MSG_ENABLE	(NETIF_MSG_DRV | \
@@ -320,7 +320,12 @@
 
 /* Mac control registers */
 #define MTK_MAC_MCR(x)		(0x10100 + (x * 0x100))
-#define MAC_MCR_MAX_RX_1536	BIT(24)
+#define MAC_MCR_MAX_RX_LEN_MASK	GENMASK(25, 24)
+#define MAC_MCR_MAX_RX_LEN(_x)	(MAC_MCR_MAX_RX_LEN_MASK & ((_x) << 24))
+#define MAC_MCR_MAX_RX_LEN_1518	0x0
+#define MAC_MCR_MAX_RX_LEN_1536	0x1
+#define MAC_MCR_MAX_RX_LEN_1552	0x2
+#define MAC_MCR_MAX_RX_LEN_2048	0x3
 #define MAC_MCR_IPG_CFG		(BIT(18) | BIT(16))
 #define MAC_MCR_FORCE_MODE	BIT(15)
 #define MAC_MCR_TX_EN		BIT(14)
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: DENG Qingfang <dqfext@gmail.com>
To: netdev@vger.kernel.org, Felix Fietkau <nbd@nbd.name>,
	John Crispin <john@phrozen.org>,
	Sean Wang <sean.wang@mediatek.com>,
	Mark Lee <Mark-MC.Lee@mediatek.com>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Cc: Rene van Dorst <opensource@vdorst.com>,
	Andrew Lunn <andrew@lunn.ch>,
	David Woodhouse <dwmw2@infradead.org>,
	Frank Wunderlich <frank-w@public-files.de>
Subject: [PATCH net-next] net: ethernet: mediatek: support setting MTU
Date: Mon, 23 Nov 2020 11:45:22 +0800	[thread overview]
Message-ID: <20201123034522.1268-1-dqfext@gmail.com> (raw)

MT762x HW, except for MT7628, supports frame length up to 2048
(maximum length on GDM), so allow setting MTU up to 2030.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 36 ++++++++++++++++++++-
 drivers/net/ethernet/mediatek/mtk_eth_soc.h | 11 +++++--
 2 files changed, 43 insertions(+), 4 deletions(-)

Changes RFC -> v1:
	Exclude MT7628

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 6d2d60675ffd..27cae3f43972 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -353,7 +353,7 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
 	/* Setup gmac */
 	mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
 	mcr_new = mcr_cur;
-	mcr_new |= MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
+	mcr_new |= MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
 		   MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK;
 
 	/* Only update control register when needed! */
@@ -2499,6 +2499,39 @@ static void mtk_uninit(struct net_device *dev)
 	mtk_rx_irq_disable(eth, ~0);
 }
 
+static int mtk_change_mtu(struct net_device *dev, int new_mtu)
+{
+	int length = new_mtu + MTK_RX_ETH_HLEN;
+	struct mtk_mac *mac = netdev_priv(dev);
+	struct mtk_eth *eth = mac->hw;
+	u32 mcr_cur, mcr_new;
+
+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) {
+		if (length > 1536)
+			return -EINVAL;
+	} else {
+		mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
+		mcr_new = mcr_cur & ~MAC_MCR_MAX_RX_LEN_MASK;
+
+		if (length <= 1518)
+			mcr_new |= MAC_MCR_MAX_RX_LEN(MAC_MCR_MAX_RX_LEN_1518);
+		else if (length <= 1536)
+			mcr_new |= MAC_MCR_MAX_RX_LEN(MAC_MCR_MAX_RX_LEN_1536);
+		else if (length <= 1552)
+			mcr_new |= MAC_MCR_MAX_RX_LEN(MAC_MCR_MAX_RX_LEN_1552);
+		else
+			mcr_new |= MAC_MCR_MAX_RX_LEN(MAC_MCR_MAX_RX_LEN_2048);
+
+		/* Only update control register when needed! */
+		if (mcr_new != mcr_cur)
+			mtk_w32(mac->hw, mcr_new, MTK_MAC_MCR(mac->id));
+	}
+
+	dev->mtu = new_mtu;
+
+	return 0;
+}
+
 static int mtk_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	struct mtk_mac *mac = netdev_priv(dev);
@@ -2795,6 +2828,7 @@ static const struct net_device_ops mtk_netdev_ops = {
 	.ndo_set_mac_address	= mtk_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= mtk_do_ioctl,
+	.ndo_change_mtu		= mtk_change_mtu,
 	.ndo_tx_timeout		= mtk_tx_timeout,
 	.ndo_get_stats64        = mtk_get_stats64,
 	.ndo_fix_features	= mtk_fix_features,
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 454cfcd465fd..cfc11654ccd6 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -17,12 +17,12 @@
 #include <linux/phylink.h>
 
 #define MTK_QDMA_PAGE_SIZE	2048
-#define	MTK_MAX_RX_LENGTH	1536
+#define MTK_MAX_RX_LENGTH	2048
 #define MTK_TX_DMA_BUF_LEN	0x3fff
 #define MTK_DMA_SIZE		256
 #define MTK_NAPI_WEIGHT		64
 #define MTK_MAC_COUNT		2
-#define MTK_RX_ETH_HLEN		(VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
+#define MTK_RX_ETH_HLEN		(ETH_HLEN + ETH_FCS_LEN)
 #define MTK_RX_HLEN		(NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN)
 #define MTK_DMA_DUMMY_DESC	0xffffffff
 #define MTK_DEFAULT_MSG_ENABLE	(NETIF_MSG_DRV | \
@@ -320,7 +320,12 @@
 
 /* Mac control registers */
 #define MTK_MAC_MCR(x)		(0x10100 + (x * 0x100))
-#define MAC_MCR_MAX_RX_1536	BIT(24)
+#define MAC_MCR_MAX_RX_LEN_MASK	GENMASK(25, 24)
+#define MAC_MCR_MAX_RX_LEN(_x)	(MAC_MCR_MAX_RX_LEN_MASK & ((_x) << 24))
+#define MAC_MCR_MAX_RX_LEN_1518	0x0
+#define MAC_MCR_MAX_RX_LEN_1536	0x1
+#define MAC_MCR_MAX_RX_LEN_1552	0x2
+#define MAC_MCR_MAX_RX_LEN_2048	0x3
 #define MAC_MCR_IPG_CFG		(BIT(18) | BIT(16))
 #define MAC_MCR_FORCE_MODE	BIT(15)
 #define MAC_MCR_TX_EN		BIT(14)
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: DENG Qingfang <dqfext@gmail.com>
To: netdev@vger.kernel.org, Felix Fietkau <nbd@nbd.name>,
	John Crispin <john@phrozen.org>,
	Sean Wang <sean.wang@mediatek.com>,
	Mark Lee <Mark-MC.Lee@mediatek.com>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Cc: Rene van Dorst <opensource@vdorst.com>,
	Andrew Lunn <andrew@lunn.ch>,
	David Woodhouse <dwmw2@infradead.org>,
	Frank Wunderlich <frank-w@public-files.de>
Subject: [PATCH net-next] net: ethernet: mediatek: support setting MTU
Date: Mon, 23 Nov 2020 11:45:22 +0800	[thread overview]
Message-ID: <20201123034522.1268-1-dqfext@gmail.com> (raw)

MT762x HW, except for MT7628, supports frame length up to 2048
(maximum length on GDM), so allow setting MTU up to 2030.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 36 ++++++++++++++++++++-
 drivers/net/ethernet/mediatek/mtk_eth_soc.h | 11 +++++--
 2 files changed, 43 insertions(+), 4 deletions(-)

Changes RFC -> v1:
	Exclude MT7628

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 6d2d60675ffd..27cae3f43972 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -353,7 +353,7 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
 	/* Setup gmac */
 	mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
 	mcr_new = mcr_cur;
-	mcr_new |= MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
+	mcr_new |= MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
 		   MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK;
 
 	/* Only update control register when needed! */
@@ -2499,6 +2499,39 @@ static void mtk_uninit(struct net_device *dev)
 	mtk_rx_irq_disable(eth, ~0);
 }
 
+static int mtk_change_mtu(struct net_device *dev, int new_mtu)
+{
+	int length = new_mtu + MTK_RX_ETH_HLEN;
+	struct mtk_mac *mac = netdev_priv(dev);
+	struct mtk_eth *eth = mac->hw;
+	u32 mcr_cur, mcr_new;
+
+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) {
+		if (length > 1536)
+			return -EINVAL;
+	} else {
+		mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
+		mcr_new = mcr_cur & ~MAC_MCR_MAX_RX_LEN_MASK;
+
+		if (length <= 1518)
+			mcr_new |= MAC_MCR_MAX_RX_LEN(MAC_MCR_MAX_RX_LEN_1518);
+		else if (length <= 1536)
+			mcr_new |= MAC_MCR_MAX_RX_LEN(MAC_MCR_MAX_RX_LEN_1536);
+		else if (length <= 1552)
+			mcr_new |= MAC_MCR_MAX_RX_LEN(MAC_MCR_MAX_RX_LEN_1552);
+		else
+			mcr_new |= MAC_MCR_MAX_RX_LEN(MAC_MCR_MAX_RX_LEN_2048);
+
+		/* Only update control register when needed! */
+		if (mcr_new != mcr_cur)
+			mtk_w32(mac->hw, mcr_new, MTK_MAC_MCR(mac->id));
+	}
+
+	dev->mtu = new_mtu;
+
+	return 0;
+}
+
 static int mtk_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	struct mtk_mac *mac = netdev_priv(dev);
@@ -2795,6 +2828,7 @@ static const struct net_device_ops mtk_netdev_ops = {
 	.ndo_set_mac_address	= mtk_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= mtk_do_ioctl,
+	.ndo_change_mtu		= mtk_change_mtu,
 	.ndo_tx_timeout		= mtk_tx_timeout,
 	.ndo_get_stats64        = mtk_get_stats64,
 	.ndo_fix_features	= mtk_fix_features,
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 454cfcd465fd..cfc11654ccd6 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -17,12 +17,12 @@
 #include <linux/phylink.h>
 
 #define MTK_QDMA_PAGE_SIZE	2048
-#define	MTK_MAX_RX_LENGTH	1536
+#define MTK_MAX_RX_LENGTH	2048
 #define MTK_TX_DMA_BUF_LEN	0x3fff
 #define MTK_DMA_SIZE		256
 #define MTK_NAPI_WEIGHT		64
 #define MTK_MAC_COUNT		2
-#define MTK_RX_ETH_HLEN		(VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
+#define MTK_RX_ETH_HLEN		(ETH_HLEN + ETH_FCS_LEN)
 #define MTK_RX_HLEN		(NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN)
 #define MTK_DMA_DUMMY_DESC	0xffffffff
 #define MTK_DEFAULT_MSG_ENABLE	(NETIF_MSG_DRV | \
@@ -320,7 +320,12 @@
 
 /* Mac control registers */
 #define MTK_MAC_MCR(x)		(0x10100 + (x * 0x100))
-#define MAC_MCR_MAX_RX_1536	BIT(24)
+#define MAC_MCR_MAX_RX_LEN_MASK	GENMASK(25, 24)
+#define MAC_MCR_MAX_RX_LEN(_x)	(MAC_MCR_MAX_RX_LEN_MASK & ((_x) << 24))
+#define MAC_MCR_MAX_RX_LEN_1518	0x0
+#define MAC_MCR_MAX_RX_LEN_1536	0x1
+#define MAC_MCR_MAX_RX_LEN_1552	0x2
+#define MAC_MCR_MAX_RX_LEN_2048	0x3
 #define MAC_MCR_IPG_CFG		(BIT(18) | BIT(16))
 #define MAC_MCR_FORCE_MODE	BIT(15)
 #define MAC_MCR_TX_EN		BIT(14)
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-11-23  3:45 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-23  3:45 DENG Qingfang [this message]
2020-11-23  3:45 ` [PATCH net-next] net: ethernet: mediatek: support setting MTU DENG Qingfang
2020-11-23  3:45 ` DENG Qingfang
2020-11-24 22:54 ` Jakub Kicinski
2020-11-24 22:54   ` Jakub Kicinski
2020-11-24 22:54   ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201123034522.1268-1-dqfext@gmail.com \
    --to=dqfext@gmail.com \
    --cc=Mark-MC.Lee@mediatek.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=dwmw2@infradead.org \
    --cc=frank-w@public-files.de \
    --cc=john@phrozen.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=matthias.bgg@gmail.com \
    --cc=nbd@nbd.name \
    --cc=netdev@vger.kernel.org \
    --cc=opensource@vdorst.com \
    --cc=sean.wang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.