From: Hsin-Yi Wang <hsinyi@chromium.org> To: Xin Ji <xji@analogixsemi.com>, Sam Ravnborg <sam@ravnborg.org>, Rob Herring <robh+dt@kernel.org> Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, Hsin-Yi Wang <hsinyi@chromium.org>, dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Andrzej Hajda <a.hajda@samsung.com>, Neil Armstrong <narmstrong@baylibre.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Jonas Karlman <jonas@kwiboo.se>, Jernej Skrabec <jernej.skrabec@siol.net> Subject: [PATCH v2 2/2] drm/bridge: anx7625: disable regulators when power off Date: Mon, 23 Nov 2020 11:46:54 +0800 [thread overview] Message-ID: <20201123034652.3660584-2-hsinyi@chromium.org> (raw) In-Reply-To: <20201123034652.3660584-1-hsinyi@chromium.org> When suspending the driver, anx7625_power_standby() will be called to turn off reset-gpios and enable-gpios. However, power supplies are not disabled. To save power, the driver can get the power supply regulators and turn off them in anx7625_power_standby(). Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> --- Change: v2: none --- drivers/gpu/drm/bridge/analogix/anx7625.c | 25 +++++++++++++++++++++++ drivers/gpu/drm/bridge/analogix/anx7625.h | 1 + 2 files changed, 26 insertions(+) diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index 65cc05982f82..eb9c4cc2504a 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/workqueue.h> @@ -875,12 +876,20 @@ static int sp_tx_edid_read(struct anx7625_data *ctx, static void anx7625_power_on(struct anx7625_data *ctx) { struct device *dev = &ctx->client->dev; + int ret; if (!ctx->pdata.low_power_mode) { DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n"); return; } + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->pdata.supplies), + ctx->pdata.supplies); + if (ret < 0) { + DRM_DEV_DEBUG_DRIVER(dev, "cannot enable regulators %d\n", ret); + return; + } + /* Power on pin enable */ gpiod_set_value(ctx->pdata.gpio_p_on, 1); usleep_range(10000, 11000); @@ -894,6 +903,7 @@ static void anx7625_power_on(struct anx7625_data *ctx) static void anx7625_power_standby(struct anx7625_data *ctx) { struct device *dev = &ctx->client->dev; + int ret; if (!ctx->pdata.low_power_mode) { DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n"); @@ -904,6 +914,12 @@ static void anx7625_power_standby(struct anx7625_data *ctx) usleep_range(1000, 1100); gpiod_set_value(ctx->pdata.gpio_p_on, 0); usleep_range(1000, 1100); + + ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies), + ctx->pdata.supplies); + if (ret < 0) + DRM_DEV_DEBUG_DRIVER(dev, "cannot disable regulators %d\n", ret); + DRM_DEV_DEBUG_DRIVER(dev, "power down\n"); } @@ -1742,6 +1758,15 @@ static int anx7625_i2c_probe(struct i2c_client *client, platform->client = client; i2c_set_clientdata(client, platform); + pdata->supplies[0].supply = "vdd10"; + pdata->supplies[1].supply = "vdd18"; + pdata->supplies[2].supply = "vdd33"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pdata->supplies), + pdata->supplies); + if (ret) { + DRM_DEV_ERROR(dev, "fail to get power supplies: %d\n", ret); + return ret; + } anx7625_init_gpio(platform); atomic_set(&platform->power_status, 0); diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h index 193ad86c5450..e4a086b3a3d7 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.h +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h @@ -350,6 +350,7 @@ struct s_edid_data { struct anx7625_platform_data { struct gpio_desc *gpio_p_on; struct gpio_desc *gpio_reset; + struct regulator_bulk_data supplies[3]; struct drm_bridge *panel_bridge; int intp_irq; u32 low_power_mode; -- 2.29.2.454.gaff20da3a2-goog
WARNING: multiple messages have this Message-ID (diff)
From: Hsin-Yi Wang <hsinyi@chromium.org> To: Xin Ji <xji@analogixsemi.com>, Sam Ravnborg <sam@ravnborg.org>, Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org, Jernej Skrabec <jernej.skrabec@siol.net>, Neil Armstrong <narmstrong@baylibre.com>, David Airlie <airlied@linux.ie>, Jonas Karlman <jonas@kwiboo.se>, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Andrzej Hajda <a.hajda@samsung.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Hsin-Yi Wang <hsinyi@chromium.org> Subject: [PATCH v2 2/2] drm/bridge: anx7625: disable regulators when power off Date: Mon, 23 Nov 2020 11:46:54 +0800 [thread overview] Message-ID: <20201123034652.3660584-2-hsinyi@chromium.org> (raw) In-Reply-To: <20201123034652.3660584-1-hsinyi@chromium.org> When suspending the driver, anx7625_power_standby() will be called to turn off reset-gpios and enable-gpios. However, power supplies are not disabled. To save power, the driver can get the power supply regulators and turn off them in anx7625_power_standby(). Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> --- Change: v2: none --- drivers/gpu/drm/bridge/analogix/anx7625.c | 25 +++++++++++++++++++++++ drivers/gpu/drm/bridge/analogix/anx7625.h | 1 + 2 files changed, 26 insertions(+) diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index 65cc05982f82..eb9c4cc2504a 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/workqueue.h> @@ -875,12 +876,20 @@ static int sp_tx_edid_read(struct anx7625_data *ctx, static void anx7625_power_on(struct anx7625_data *ctx) { struct device *dev = &ctx->client->dev; + int ret; if (!ctx->pdata.low_power_mode) { DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n"); return; } + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->pdata.supplies), + ctx->pdata.supplies); + if (ret < 0) { + DRM_DEV_DEBUG_DRIVER(dev, "cannot enable regulators %d\n", ret); + return; + } + /* Power on pin enable */ gpiod_set_value(ctx->pdata.gpio_p_on, 1); usleep_range(10000, 11000); @@ -894,6 +903,7 @@ static void anx7625_power_on(struct anx7625_data *ctx) static void anx7625_power_standby(struct anx7625_data *ctx) { struct device *dev = &ctx->client->dev; + int ret; if (!ctx->pdata.low_power_mode) { DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n"); @@ -904,6 +914,12 @@ static void anx7625_power_standby(struct anx7625_data *ctx) usleep_range(1000, 1100); gpiod_set_value(ctx->pdata.gpio_p_on, 0); usleep_range(1000, 1100); + + ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies), + ctx->pdata.supplies); + if (ret < 0) + DRM_DEV_DEBUG_DRIVER(dev, "cannot disable regulators %d\n", ret); + DRM_DEV_DEBUG_DRIVER(dev, "power down\n"); } @@ -1742,6 +1758,15 @@ static int anx7625_i2c_probe(struct i2c_client *client, platform->client = client; i2c_set_clientdata(client, platform); + pdata->supplies[0].supply = "vdd10"; + pdata->supplies[1].supply = "vdd18"; + pdata->supplies[2].supply = "vdd33"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pdata->supplies), + pdata->supplies); + if (ret) { + DRM_DEV_ERROR(dev, "fail to get power supplies: %d\n", ret); + return ret; + } anx7625_init_gpio(platform); atomic_set(&platform->power_status, 0); diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h index 193ad86c5450..e4a086b3a3d7 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.h +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h @@ -350,6 +350,7 @@ struct s_edid_data { struct anx7625_platform_data { struct gpio_desc *gpio_p_on; struct gpio_desc *gpio_reset; + struct regulator_bulk_data supplies[3]; struct drm_bridge *panel_bridge; int intp_irq; u32 low_power_mode; -- 2.29.2.454.gaff20da3a2-goog _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-11-23 3:47 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-11-23 3:46 [PATCH v2 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies Hsin-Yi Wang 2020-11-23 3:46 ` Hsin-Yi Wang 2020-11-23 3:46 ` Hsin-Yi Wang [this message] 2020-11-23 3:46 ` [PATCH v2 2/2] drm/bridge: anx7625: disable regulators when power off Hsin-Yi Wang 2020-12-09 4:43 ` Hsin-Yi Wang 2020-12-09 4:43 ` Hsin-Yi Wang 2020-12-25 5:41 ` Hsin-Yi Wang 2020-12-25 5:41 ` Hsin-Yi Wang 2020-12-07 22:42 ` [PATCH v2 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies Rob Herring 2020-12-07 22:42 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201123034652.3660584-2-hsinyi@chromium.org \ --to=hsinyi@chromium.org \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=a.hajda@samsung.com \ --cc=airlied@linux.ie \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jernej.skrabec@siol.net \ --cc=jonas@kwiboo.se \ --cc=linux-kernel@vger.kernel.org \ --cc=narmstrong@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=sam@ravnborg.org \ --cc=xji@analogixsemi.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.