All of lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: alsa-devel@alsa-project.org
Cc: Matwey Kornilov <matwey.kornilov@gmail.com>,
	Dylan Robinson <dylan_robinson@motu.com>,
	Keith Milner <kamilner@superlative.org>
Subject: [PATCH 28/41] ALSA: usb-audio: Use atomic_t for endpoint use_count
Date: Mon, 23 Nov 2020 09:53:34 +0100	[thread overview]
Message-ID: <20201123085347.19667-29-tiwai@suse.de> (raw)
In-Reply-To: <20201123085347.19667-1-tiwai@suse.de>

The endpoint objects may be started/stopped concurrently by different
substreams in the case of implicit feedback mode, while the current
code handles the reference counter without any protection.

This patch changes the refcount to atomic_t for avoiding the
inconsistency.  We need no reference_t here as the refcount goes only
up to 2.

Also the name "use_count" is renamed to "running" since this is about
actually the running status, not the open refcount.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/card.h     |  2 +-
 sound/usb/endpoint.c | 26 ++++++++++++++------------
 2 files changed, 15 insertions(+), 13 deletions(-)

diff --git a/sound/usb/card.h b/sound/usb/card.h
index 53f0ce61f858..f58c3769b058 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -60,7 +60,7 @@ struct snd_usb_endpoint {
 	struct snd_usb_audio *chip;
 
 	int opened;		/* open refcount; protect with chip->mutex */
-	int use_count;
+	atomic_t running;	/* running status */
 	int ep_num;		/* the referenced endpoint number */
 	int type;		/* SND_USB_ENDPOINT_TYPE_* */
 	unsigned long flags;
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 49fb934ee432..4d733b2d8287 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -1234,7 +1234,7 @@ int snd_usb_endpoint_configure(struct snd_usb_audio *chip,
  *
  * @ep: the endpoint to start
  *
- * A call to this function will increment the use count of the endpoint.
+ * A call to this function will increment the running count of the endpoint.
  * In case it is not already running, the URBs for this endpoint will be
  * submitted. Otherwise, this function does nothing.
  *
@@ -1253,11 +1253,12 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
 	if (ep->sync_master)
 		WRITE_ONCE(ep->sync_master->sync_slave, ep);
 
-	usb_audio_dbg(ep->chip, "Starting %s EP 0x%x (count %d)\n",
-		      ep_type_name(ep->type), ep->ep_num, ep->use_count);
+	usb_audio_dbg(ep->chip, "Starting %s EP 0x%x (running %d)\n",
+		      ep_type_name(ep->type), ep->ep_num,
+		      atomic_read(&ep->running));
 
 	/* already running? */
-	if (++ep->use_count != 1)
+	if (atomic_inc_return(&ep->running) != 1)
 		return 0;
 
 	/* just to be sure */
@@ -1319,7 +1320,7 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
 	if (ep->sync_master)
 		WRITE_ONCE(ep->sync_master->sync_slave, NULL);
 	clear_bit(EP_FLAG_RUNNING, &ep->flags);
-	ep->use_count--;
+	atomic_dec(&ep->running);
 	deactivate_urbs(ep, false);
 	return -EPIPE;
 }
@@ -1329,7 +1330,7 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
  *
  * @ep: the endpoint to stop (may be NULL)
  *
- * A call to this function will decrement the use count of the endpoint.
+ * A call to this function will decrement the running count of the endpoint.
  * In case the last user has requested the endpoint stop, the URBs will
  * actually be deactivated.
  *
@@ -1343,16 +1344,17 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep)
 	if (!ep)
 		return;
 
-	usb_audio_dbg(ep->chip, "Stopping %s EP 0x%x (count %d)\n",
-		      ep_type_name(ep->type), ep->ep_num, ep->use_count);
+	usb_audio_dbg(ep->chip, "Stopping %s EP 0x%x (running %d)\n",
+		      ep_type_name(ep->type), ep->ep_num,
+		      atomic_read(&ep->running));
 
-	if (snd_BUG_ON(ep->use_count == 0))
+	if (snd_BUG_ON(!atomic_read(&ep->running)))
 		return;
 
 	if (ep->sync_master)
 		WRITE_ONCE(ep->sync_master->sync_slave, NULL);
 
-	if (--ep->use_count == 0) {
+	if (!atomic_dec_return(&ep->running)) {
 		deactivate_urbs(ep, false);
 		set_bit(EP_FLAG_STOPPING, &ep->flags);
 	}
@@ -1363,7 +1365,7 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep)
  *
  * @ep: the endpoint to release
  *
- * This function does not care for the endpoint's use count but will tear
+ * This function does not care for the endpoint's running count but will tear
  * down all the streaming URBs immediately.
  */
 void snd_usb_endpoint_release(struct snd_usb_endpoint *ep)
@@ -1410,7 +1412,7 @@ static void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
 	 * will take care of them later.
 	 */
 	if (snd_usb_endpoint_implicit_feedback_sink(ep) &&
-	    ep->use_count != 0) {
+	    atomic_read(&ep->running)) {
 
 		/* implicit feedback case */
 		int i, bytes = 0;
-- 
2.16.4


  parent reply	other threads:[~2020-11-23  9:06 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-23  8:53 [PATCH 00/41] USB audio refactoring for better implicit feedback support Takashi Iwai
2020-11-23  8:53 ` [PATCH 01/41] ALSA: usb-audio: Handle discrete rates properly in hw constraints Takashi Iwai
2020-11-23  8:53 ` [PATCH 02/41] ALSA: usb-audio: Don't call usb_set_interface() at trigger callback Takashi Iwai
2020-11-23  8:53 ` [PATCH 03/41] ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3 Takashi Iwai
2020-11-23  8:53 ` [PATCH 04/41] ALSA: usb-audio: Check implicit feedback EP generically for UAC2 Takashi Iwai
2020-11-23  8:53 ` [PATCH 05/41] ALSA: usb-audio: Add snd_usb_get_endpoint() helper Takashi Iwai
2020-11-23  8:53 ` [PATCH 06/41] ALSA: usb-audio: Set and clear sync EP link properly Takashi Iwai
2020-11-23  8:53 ` [PATCH 07/41] ALSA: usb-audio: Improve some debug prints Takashi Iwai
2020-11-23  8:53 ` [PATCH 08/41] ALSA: usb-audio: Track implicit fb sync endpoint in audioformat list Takashi Iwai
2020-11-23  8:53 ` [PATCH 09/41] ALSA: usb-audio: Move snd_usb_autoresume() call out of setup_hw_info() Takashi Iwai
2020-11-23  8:53 ` [PATCH 10/41] ALSA: usb-audio: Add hw constraint for implicit fb sync Takashi Iwai
2020-11-23  8:53 ` [PATCH 11/41] ALSA: usb-audio: Simplify hw_params rules Takashi Iwai
2020-11-23  8:53 ` [PATCH 12/41] ALSA: usb-audio: Drop debug.h Takashi Iwai
2020-11-23  8:53 ` [PATCH 13/41] ALSA: usb-audio: Avoid doubly initialization for implicit fb Takashi Iwai
2020-11-23  8:53 ` [PATCH 14/41] ALSA: usb-audio: Create endpoint objects at parsing phase Takashi Iwai
2021-01-03 17:09   ` [PATCH 14/41] ALSA: usb-audio: Create endpoint objects at parsing phase - Pioneer DJ DJM-250MK2 stopped working František Kučera
2021-01-03 17:19     ` Takashi Iwai
2021-01-03 18:15       ` František Kučera
2021-01-05  9:29         ` Takashi Iwai
2021-01-05 13:20           ` Takashi Iwai
2021-01-05 22:27             ` František Kučera
2021-01-06  9:03               ` Takashi Iwai
2021-01-06 19:01                 ` František Kučera
2021-01-07 13:30                   ` Takashi Iwai
2020-11-23  8:53 ` [PATCH 15/41] ALSA: usb-audio: Drop keep_interface flag again Takashi Iwai
2020-11-23  8:53 ` [PATCH 16/41] ALSA: usb-audio: Add snd_usb_get_host_interface() helper Takashi Iwai
2020-11-23  8:53 ` [PATCH 17/41] ALSA: usb-audio: Don't set altsetting before initializing sample rate Takashi Iwai
2020-11-23  8:53 ` [PATCH 18/41] ALSA: usb-audio: Pass snd_usb_audio object to quirk functions Takashi Iwai
2020-11-23  8:53 ` [PATCH 19/41] ALSA: usb-audio: Simplify snd_usb_init_sample_rate() arguments Takashi Iwai
2020-11-23  8:53 ` [PATCH 20/41] ALSA: usb-audio: Simplify snd_usb_init_pitch() arguments Takashi Iwai
2020-11-23  8:53 ` [PATCH 21/41] ALSA: usb-audio: Stop both endpoints properly at error Takashi Iwai
2020-11-23  8:53 ` [PATCH 22/41] ALSA: usb-audio: Set callbacks via snd_usb_endpoint_set_callback() Takashi Iwai
2020-11-23  8:53 ` [PATCH 23/41] ALSA: usb-audio: Always set up the parameters after resume Takashi Iwai
2020-11-23  8:53 ` [PATCH 24/41] ALSA: usb-audio: Fix EP matching for continuous rates Takashi Iwai
2020-11-23  8:53 ` [PATCH 25/41] ALSA: usb-audio: Refactor endpoint management Takashi Iwai
2020-11-23  8:53 ` [PATCH 26/41] ALSA: usb-audio: Fix possible stall of implicit fb packet ring-buffer Takashi Iwai
2020-11-23  8:53 ` [PATCH 27/41] ALSA: usb-audio: Constify audioformat pointer references Takashi Iwai
2020-11-23  8:53 ` Takashi Iwai [this message]
2020-11-23  8:53 ` [PATCH 29/41] ALSA: usb-audio: Refactoring endpoint URB deactivation Takashi Iwai
2020-11-23  8:53 ` [PATCH 30/41] ALSA: usb-audio: Drop unneeded snd_usb_substream fields Takashi Iwai
2020-11-23  8:53 ` [PATCH 31/41] ALSA: usb-audio: Unify the code for the next packet size calculation Takashi Iwai
2020-11-23  8:53 ` [PATCH 32/41] ALSA: usb-audio: Simplify rate_min/max and rates set up Takashi Iwai
2020-11-23  8:53 ` [PATCH 33/41] ALSA: usb-audio: Replace slave/master terms Takashi Iwai
2020-11-23  8:53 ` [PATCH 34/41] ALSA: usb-audio: Use unsigned char for iface and altsettings fields Takashi Iwai
2020-11-23  8:53 ` [PATCH 35/41] ALSA: usb-audio: Show sync endpoint information in proc outputs Takashi Iwai
2020-11-23  8:53 ` [PATCH 36/41] ALSA: usb-audio: Quirk for BOSS GT-001 Takashi Iwai
2020-11-23  8:53 ` [PATCH 37/41] ALSA: usb-audio: Factor out the implicit feedback quirk code Takashi Iwai
2020-11-23  8:53 ` [PATCH 38/41] ALSA: usb-audio: Add generic implicit fb parsing Takashi Iwai
2020-11-23  8:53 ` [PATCH 39/41] ALSA: usb-audio: Add implicit_fb module option Takashi Iwai
2020-11-23  9:46   ` Pavel Hofman
2020-11-23  8:53 ` [PATCH 40/41] ALSA: usb-audio: Fix quirks for other BOSS devices Takashi Iwai
2020-11-23  8:53 ` [PATCH 41/41] ALSA: usb-audio: Fix MOTU M-Series quirks Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201123085347.19667-29-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=dylan_robinson@motu.com \
    --cc=kamilner@superlative.org \
    --cc=matwey.kornilov@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.