All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Sebastian Reichel <sre@kernel.org>,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Lars Povlsen <lars.povlsen@microchip.com>,
	<Steen.Hegelund@microchip.com>,
	Gregory CLEMENT <gregory.clement@bootlin.com>
Subject: [PATCH v2 2/3] power: reset: ocelot: Add support 2 other MIPS based SoCs
Date: Wed, 25 Nov 2020 08:19:19 +0100	[thread overview]
Message-ID: <20201125071920.126978-3-gregory.clement@bootlin.com> (raw)
In-Reply-To: <20201125071920.126978-1-gregory.clement@bootlin.com>

This adds reset support for Luton and Jaguar2 in the ocelot-reset
driver. They are both MIPS based belonging to the Vcore III family.

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 drivers/power/reset/ocelot-reset.c | 30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/power/reset/ocelot-reset.c b/drivers/power/reset/ocelot-reset.c
index f74e1dbb4ba3..8caa90cb58fc 100644
--- a/drivers/power/reset/ocelot-reset.c
+++ b/drivers/power/reset/ocelot-reset.c
@@ -29,6 +29,8 @@ struct ocelot_reset_context {
 	struct notifier_block restart_handler;
 };
 
+#define BIT_OFF_INVALID				32
+
 #define SOFT_CHIP_RST BIT(0)
 
 #define ICPU_CFG_CPU_SYSTEM_CTRL_GENERAL_CTRL	0x24
@@ -50,9 +52,11 @@ static int ocelot_restart_handle(struct notifier_block *this,
 			   ctx->props->vcore_protect, 0);
 
 	/* Make the SI back to boot mode */
-	regmap_update_bits(ctx->cpu_ctrl, ICPU_CFG_CPU_SYSTEM_CTRL_GENERAL_CTRL,
-			   IF_SI_OWNER_MASK << if_si_owner_bit,
-			   IF_SI_OWNER_SIBM << if_si_owner_bit);
+	if (if_si_owner_bit != BIT_OFF_INVALID)
+		regmap_update_bits(ctx->cpu_ctrl,
+				   ICPU_CFG_CPU_SYSTEM_CTRL_GENERAL_CTRL,
+				   IF_SI_OWNER_MASK << if_si_owner_bit,
+				   IF_SI_OWNER_SIBM << if_si_owner_bit);
 
 	pr_emerg("Resetting SoC\n");
 
@@ -96,6 +100,20 @@ static int ocelot_reset_probe(struct platform_device *pdev)
 	return err;
 }
 
+static const struct reset_props reset_props_jaguar2 = {
+	.syscon		 = "mscc,ocelot-cpu-syscon",
+	.protect_reg     = 0x20,
+	.vcore_protect   = BIT(2),
+	.if_si_owner_bit = 6,
+};
+
+static const struct reset_props reset_props_luton = {
+	.syscon		 = "mscc,ocelot-cpu-syscon",
+	.protect_reg     = 0x20,
+	.vcore_protect   = BIT(2),
+	.if_si_owner_bit = BIT_OFF_INVALID, /* n/a */
+};
+
 static const struct reset_props reset_props_ocelot = {
 	.syscon		 = "mscc,ocelot-cpu-syscon",
 	.protect_reg     = 0x20,
@@ -112,6 +130,12 @@ static const struct reset_props reset_props_sparx5 = {
 
 static const struct of_device_id ocelot_reset_of_match[] = {
 	{
+		.compatible = "mscc,jaguar2-chip-reset",
+		.data = &reset_props_jaguar2
+	}, {
+		.compatible = "mscc,luton-chip-reset",
+		.data = &reset_props_luton
+	}, {
 		.compatible = "mscc,ocelot-chip-reset",
 		.data = &reset_props_ocelot
 	}, {
-- 
2.29.2


  parent reply	other threads:[~2020-11-25  7:19 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-25  7:19 [PATCH v2 0/3] Add reset support in ocelot driver for new platforms Gregory CLEMENT
2020-11-25  7:19 ` [PATCH v2 1/3] dt-bindings: reset: ocelot: Add Luton and Jaguar2 support Gregory CLEMENT
2020-11-25  7:19 ` Gregory CLEMENT [this message]
2020-11-25  7:19 ` [PATCH v2 3/3] MIPS: dts: mscc: add reset support for Luton and Jaguar2 Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201125071920.126978-3-gregory.clement@bootlin.com \
    --to=gregory.clement@bootlin.com \
    --cc=Steen.Hegelund@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lars.povlsen@microchip.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.