From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-kernel@vger.kernel.org
Cc: Collabora Kernel ML <kernel@collabora.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH 3/3] arm64: dts: mt8183: Add display nodes for MT8183
Date: Fri, 27 Nov 2020 11:49:30 +0100 [thread overview]
Message-ID: <20201127104930.1981497-4-enric.balletbo@collabora.com> (raw)
In-Reply-To: <20201127104930.1981497-1-enric.balletbo@collabora.com>
Add display subsystem device nodes to allow video output.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 114 +++++++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index ba9ff192cda3..34d83f517b07 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -6,6 +6,7 @@
*/
#include <dt-bindings/clock/mt8183-clk.h>
+#include <dt-bindings/gce/mt8173-gce.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/memory/mt8183-larb-port.h>
@@ -33,6 +34,11 @@ aliases {
i2c9 = &i2c9;
i2c10 = &i2c10;
i2c11 = &i2c11;
+ ovl0 = &ovl0;
+ ovl-2l0 = &ovl_2l0;
+ ovl-2l1 = &ovl_2l1;
+ rdma0 = &rdma0;
+ rdma1 = &rdma1;
};
cpus {
@@ -964,6 +970,107 @@ mmsys: syscon@14000000 {
#clock-cells = <1>;
};
+ ovl0: ovl@14008000 {
+ compatible = "mediatek,mt8183-disp-ovl";
+ reg = <0 0x14008000 0 0x1000>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_OVL0>;
+ iommus = <&iommu M4U_PORT_DISP_OVL0>;
+ mediatek,larb = <&larb0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+ };
+
+ ovl_2l0: ovl@14009000 {
+ compatible = "mediatek,mt8183-disp-ovl-2l";
+ reg = <0 0x14009000 0 0x1000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+ iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
+ mediatek,larb = <&larb0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+ };
+
+ ovl_2l1: ovl@1400a000 {
+ compatible = "mediatek,mt8183-disp-ovl-2l";
+ reg = <0 0x1400a000 0 0x1000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
+ iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
+ mediatek,larb = <&larb0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
+ };
+
+ rdma0: rdma@1400b000 {
+ compatible = "mediatek,mt8183-disp-rdma";
+ reg = <0 0x1400b000 0 0x1000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+ iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+ mediatek,larb = <&larb0>;
+ mediatek,rdma_fifo_size = <5120>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+ };
+
+ rdma1: rdma@1400c000 {
+ compatible = "mediatek,mt8183-disp-rdma";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+ iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+ mediatek,larb = <&larb0>;
+ mediatek,rdma_fifo_size = <2048>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+ };
+
+ color0: color@1400e000 {
+ compatible = "mediatek,mt8183-disp-color",
+ "mediatek,mt8173-disp-color";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+ };
+
+ ccorr0: ccorr@1400f000 {
+ compatible = "mediatek,mt8183-disp-ccorr";
+ reg = <0 0x1400f000 0 0x1000>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+ };
+
+ aal0: aal@14010000 {
+ compatible = "mediatek,mt8183-disp-aal",
+ "mediatek,mt8173-disp-aal";
+ reg = <0 0x14010000 0 0x1000>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_AAL0>;
+ };
+
+ gamma0: gamma@14011000 {
+ compatible = "mediatek,mt8183-disp-gamma",
+ "mediatek,mt8173-disp-gamma";
+ reg = <0 0x14011000 0 0x1000>;
+ interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+ };
+
+ dither0: dither@14012000 {
+ compatible = "mediatek,mt8183-disp-dither";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+ };
+
dsi0: dsi@14014000 {
compatible = "mediatek,mt8183-dsi";
reg = <0 0x14014000 0 0x1000>;
@@ -978,6 +1085,13 @@ dsi0: dsi@14014000 {
phy-names = "dphy";
};
+ mutex: mutex@14016000 {
+ compatible = "mediatek,mt8183-disp-mutex";
+ reg = <0 0x14016000 0 0x1000>;
+ interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ };
+
larb0: larb@14017000 {
compatible = "mediatek,mt8183-smi-larb";
reg = <0 0x14017000 0 0x1000>;
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
Collabora Kernel ML <kernel@collabora.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] arm64: dts: mt8183: Add display nodes for MT8183
Date: Fri, 27 Nov 2020 11:49:30 +0100 [thread overview]
Message-ID: <20201127104930.1981497-4-enric.balletbo@collabora.com> (raw)
In-Reply-To: <20201127104930.1981497-1-enric.balletbo@collabora.com>
Add display subsystem device nodes to allow video output.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 114 +++++++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index ba9ff192cda3..34d83f517b07 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -6,6 +6,7 @@
*/
#include <dt-bindings/clock/mt8183-clk.h>
+#include <dt-bindings/gce/mt8173-gce.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/memory/mt8183-larb-port.h>
@@ -33,6 +34,11 @@ aliases {
i2c9 = &i2c9;
i2c10 = &i2c10;
i2c11 = &i2c11;
+ ovl0 = &ovl0;
+ ovl-2l0 = &ovl_2l0;
+ ovl-2l1 = &ovl_2l1;
+ rdma0 = &rdma0;
+ rdma1 = &rdma1;
};
cpus {
@@ -964,6 +970,107 @@ mmsys: syscon@14000000 {
#clock-cells = <1>;
};
+ ovl0: ovl@14008000 {
+ compatible = "mediatek,mt8183-disp-ovl";
+ reg = <0 0x14008000 0 0x1000>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_OVL0>;
+ iommus = <&iommu M4U_PORT_DISP_OVL0>;
+ mediatek,larb = <&larb0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+ };
+
+ ovl_2l0: ovl@14009000 {
+ compatible = "mediatek,mt8183-disp-ovl-2l";
+ reg = <0 0x14009000 0 0x1000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+ iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
+ mediatek,larb = <&larb0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+ };
+
+ ovl_2l1: ovl@1400a000 {
+ compatible = "mediatek,mt8183-disp-ovl-2l";
+ reg = <0 0x1400a000 0 0x1000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
+ iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
+ mediatek,larb = <&larb0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
+ };
+
+ rdma0: rdma@1400b000 {
+ compatible = "mediatek,mt8183-disp-rdma";
+ reg = <0 0x1400b000 0 0x1000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+ iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+ mediatek,larb = <&larb0>;
+ mediatek,rdma_fifo_size = <5120>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+ };
+
+ rdma1: rdma@1400c000 {
+ compatible = "mediatek,mt8183-disp-rdma";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+ iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+ mediatek,larb = <&larb0>;
+ mediatek,rdma_fifo_size = <2048>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+ };
+
+ color0: color@1400e000 {
+ compatible = "mediatek,mt8183-disp-color",
+ "mediatek,mt8173-disp-color";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+ };
+
+ ccorr0: ccorr@1400f000 {
+ compatible = "mediatek,mt8183-disp-ccorr";
+ reg = <0 0x1400f000 0 0x1000>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+ };
+
+ aal0: aal@14010000 {
+ compatible = "mediatek,mt8183-disp-aal",
+ "mediatek,mt8173-disp-aal";
+ reg = <0 0x14010000 0 0x1000>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_AAL0>;
+ };
+
+ gamma0: gamma@14011000 {
+ compatible = "mediatek,mt8183-disp-gamma",
+ "mediatek,mt8173-disp-gamma";
+ reg = <0 0x14011000 0 0x1000>;
+ interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+ };
+
+ dither0: dither@14012000 {
+ compatible = "mediatek,mt8183-disp-dither";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+ };
+
dsi0: dsi@14014000 {
compatible = "mediatek,mt8183-dsi";
reg = <0 0x14014000 0 0x1000>;
@@ -978,6 +1085,13 @@ dsi0: dsi@14014000 {
phy-names = "dphy";
};
+ mutex: mutex@14016000 {
+ compatible = "mediatek,mt8183-disp-mutex";
+ reg = <0 0x14016000 0 0x1000>;
+ interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ };
+
larb0: larb@14017000 {
compatible = "mediatek,mt8183-smi-larb";
reg = <0 0x14017000 0 0x1000>;
--
2.29.2
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
Collabora Kernel ML <kernel@collabora.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] arm64: dts: mt8183: Add display nodes for MT8183
Date: Fri, 27 Nov 2020 11:49:30 +0100 [thread overview]
Message-ID: <20201127104930.1981497-4-enric.balletbo@collabora.com> (raw)
In-Reply-To: <20201127104930.1981497-1-enric.balletbo@collabora.com>
Add display subsystem device nodes to allow video output.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 114 +++++++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index ba9ff192cda3..34d83f517b07 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -6,6 +6,7 @@
*/
#include <dt-bindings/clock/mt8183-clk.h>
+#include <dt-bindings/gce/mt8173-gce.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/memory/mt8183-larb-port.h>
@@ -33,6 +34,11 @@ aliases {
i2c9 = &i2c9;
i2c10 = &i2c10;
i2c11 = &i2c11;
+ ovl0 = &ovl0;
+ ovl-2l0 = &ovl_2l0;
+ ovl-2l1 = &ovl_2l1;
+ rdma0 = &rdma0;
+ rdma1 = &rdma1;
};
cpus {
@@ -964,6 +970,107 @@ mmsys: syscon@14000000 {
#clock-cells = <1>;
};
+ ovl0: ovl@14008000 {
+ compatible = "mediatek,mt8183-disp-ovl";
+ reg = <0 0x14008000 0 0x1000>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_OVL0>;
+ iommus = <&iommu M4U_PORT_DISP_OVL0>;
+ mediatek,larb = <&larb0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+ };
+
+ ovl_2l0: ovl@14009000 {
+ compatible = "mediatek,mt8183-disp-ovl-2l";
+ reg = <0 0x14009000 0 0x1000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+ iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
+ mediatek,larb = <&larb0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+ };
+
+ ovl_2l1: ovl@1400a000 {
+ compatible = "mediatek,mt8183-disp-ovl-2l";
+ reg = <0 0x1400a000 0 0x1000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
+ iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
+ mediatek,larb = <&larb0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
+ };
+
+ rdma0: rdma@1400b000 {
+ compatible = "mediatek,mt8183-disp-rdma";
+ reg = <0 0x1400b000 0 0x1000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+ iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+ mediatek,larb = <&larb0>;
+ mediatek,rdma_fifo_size = <5120>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+ };
+
+ rdma1: rdma@1400c000 {
+ compatible = "mediatek,mt8183-disp-rdma";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+ iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+ mediatek,larb = <&larb0>;
+ mediatek,rdma_fifo_size = <2048>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+ };
+
+ color0: color@1400e000 {
+ compatible = "mediatek,mt8183-disp-color",
+ "mediatek,mt8173-disp-color";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+ };
+
+ ccorr0: ccorr@1400f000 {
+ compatible = "mediatek,mt8183-disp-ccorr";
+ reg = <0 0x1400f000 0 0x1000>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+ };
+
+ aal0: aal@14010000 {
+ compatible = "mediatek,mt8183-disp-aal",
+ "mediatek,mt8173-disp-aal";
+ reg = <0 0x14010000 0 0x1000>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_AAL0>;
+ };
+
+ gamma0: gamma@14011000 {
+ compatible = "mediatek,mt8183-disp-gamma",
+ "mediatek,mt8173-disp-gamma";
+ reg = <0 0x14011000 0 0x1000>;
+ interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+ };
+
+ dither0: dither@14012000 {
+ compatible = "mediatek,mt8183-disp-dither";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+ };
+
dsi0: dsi@14014000 {
compatible = "mediatek,mt8183-dsi";
reg = <0 0x14014000 0 0x1000>;
@@ -978,6 +1085,13 @@ dsi0: dsi@14014000 {
phy-names = "dphy";
};
+ mutex: mutex@14016000 {
+ compatible = "mediatek,mt8183-disp-mutex";
+ reg = <0 0x14016000 0 0x1000>;
+ interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ };
+
larb0: larb@14017000 {
compatible = "mediatek,mt8183-smi-larb";
reg = <0 0x14017000 0 0x1000>;
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-27 10:49 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-27 10:49 [PATCH 0/3] arm64: dts: mediatek: Add dsi and display support for MT8183 based boards Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-11-27 10:49 ` [PATCH 1/3] arm64: dts: mt8183: Add dsi node Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-11-27 10:49 ` [PATCH 2/3] arm64: dts: mt8183: Add iommu and larb nodes Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra [this message]
2020-11-27 10:49 ` [PATCH 3/3] arm64: dts: mt8183: Add display nodes for MT8183 Enric Balletbo i Serra
2020-11-27 10:49 ` Enric Balletbo i Serra
2020-12-10 7:01 ` CK Hu
2020-12-10 7:01 ` CK Hu
2020-12-10 7:01 ` CK Hu
2020-11-27 11:23 ` [PATCH 0/3] arm64: dts: mediatek: Add dsi and display support for MT8183 based boards Matthias Brugger
2020-11-27 11:23 ` Matthias Brugger
2020-11-27 11:23 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201127104930.1981497-4-enric.balletbo@collabora.com \
--to=enric.balletbo@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.