From: Martin Kepplinger <martin.kepplinger@puri.sm> To: robh@kernel.org, shawnguo@kernel.org, festevam@gmail.com, catalin.marinas@arm.com, will@kernel.org, georgi.djakov@linaro.org, cdleonard@gmail.com Cc: kernel@pengutronix.de, linux-imx@nxp.com, kernel@puri.sm, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, Leonard Crestez <leonard.crestez@nxp.com>, Martin Kepplinger <martin.kepplinger@puri.sm> Subject: [PATCH v2 1/7] arm64: dts: imx8m: Add NOC nodes Date: Tue, 1 Dec 2020 13:39:26 +0100 [thread overview] Message-ID: <20201201123932.12312-2-martin.kepplinger@puri.sm> (raw) In-Reply-To: <20201201123932.12312-1-martin.kepplinger@puri.sm> From: Leonard Crestez <leonard.crestez@nxp.com> Add initial support for dynamic frequency scaling of main NOC. Make DDRC the parent of the NOC (using passive governor) so that the main NOC is automatically scaled together with DDRC by default. Support for proactive scaling via interconnect will come on top. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> (imx8mq) --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 22 ++++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mn.dtsi | 22 ++++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++ 3 files changed, 66 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index c824f2615fe8..835b19f0ea42 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -921,6 +921,28 @@ }; + noc: interconnect@32700000 { + compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MM_CLK_NOC>; + devfreq = <&ddrc>; + operating-points-v2 = <&noc_opp_table>; + + noc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-150M { + opp-hz = /bits/ 64 <150000000>; + }; + opp-375M { + opp-hz = /bits/ 64 <375000000>; + }; + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; + }; + aips4: bus@32c00000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index a06d2a6268e6..8e2d413f97d4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -772,6 +772,28 @@ }; + noc: interconnect@32700000 { + compatible = "fsl,imx8mn-noc", "fsl,imx8m-noc"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MN_CLK_NOC>; + devfreq = <&ddrc>; + operating-points-v2 = <&noc_opp_table>; + + noc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + opp-600M { + opp-hz = /bits/ 64 <600000000>; + }; + opp-800M { + opp-hz = /bits/ 64 <800000000>; + }; + }; + }; + aips4: bus@32c00000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index a841a023e8e0..d139a46ee8ce 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1158,6 +1158,28 @@ }; }; + noc: interconnect@32700000 { + compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MQ_CLK_NOC>; + devfreq = <&ddrc>; + operating-points-v2 = <&noc_opp_table>; + + noc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-133M { + opp-hz = /bits/ 64 <133333333>; + }; + opp-400M { + opp-hz = /bits/ 64 <400000000>; + }; + opp-800M { + opp-hz = /bits/ 64 <800000000>; + }; + }; + }; + bus@32c00000 { /* AIPS4 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Martin Kepplinger <martin.kepplinger@puri.sm> To: robh@kernel.org, shawnguo@kernel.org, festevam@gmail.com, catalin.marinas@arm.com, will@kernel.org, georgi.djakov@linaro.org, cdleonard@gmail.com Cc: devicetree@vger.kernel.org, kernel@puri.sm, linux-pm@vger.kernel.org, Martin Kepplinger <martin.kepplinger@puri.sm>, linux-kernel@vger.kernel.org, linux-imx@nxp.com, kernel@pengutronix.de, Leonard Crestez <leonard.crestez@nxp.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 1/7] arm64: dts: imx8m: Add NOC nodes Date: Tue, 1 Dec 2020 13:39:26 +0100 [thread overview] Message-ID: <20201201123932.12312-2-martin.kepplinger@puri.sm> (raw) In-Reply-To: <20201201123932.12312-1-martin.kepplinger@puri.sm> From: Leonard Crestez <leonard.crestez@nxp.com> Add initial support for dynamic frequency scaling of main NOC. Make DDRC the parent of the NOC (using passive governor) so that the main NOC is automatically scaled together with DDRC by default. Support for proactive scaling via interconnect will come on top. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> (imx8mq) --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 22 ++++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mn.dtsi | 22 ++++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++ 3 files changed, 66 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index c824f2615fe8..835b19f0ea42 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -921,6 +921,28 @@ }; + noc: interconnect@32700000 { + compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MM_CLK_NOC>; + devfreq = <&ddrc>; + operating-points-v2 = <&noc_opp_table>; + + noc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-150M { + opp-hz = /bits/ 64 <150000000>; + }; + opp-375M { + opp-hz = /bits/ 64 <375000000>; + }; + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; + }; + aips4: bus@32c00000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index a06d2a6268e6..8e2d413f97d4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -772,6 +772,28 @@ }; + noc: interconnect@32700000 { + compatible = "fsl,imx8mn-noc", "fsl,imx8m-noc"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MN_CLK_NOC>; + devfreq = <&ddrc>; + operating-points-v2 = <&noc_opp_table>; + + noc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + opp-600M { + opp-hz = /bits/ 64 <600000000>; + }; + opp-800M { + opp-hz = /bits/ 64 <800000000>; + }; + }; + }; + aips4: bus@32c00000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index a841a023e8e0..d139a46ee8ce 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1158,6 +1158,28 @@ }; }; + noc: interconnect@32700000 { + compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MQ_CLK_NOC>; + devfreq = <&ddrc>; + operating-points-v2 = <&noc_opp_table>; + + noc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-133M { + opp-hz = /bits/ 64 <133333333>; + }; + opp-400M { + opp-hz = /bits/ 64 <400000000>; + }; + opp-800M { + opp-hz = /bits/ 64 <800000000>; + }; + }; + }; + bus@32c00000 { /* AIPS4 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-12-01 12:41 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-01 12:39 [PATCH v2 0/7] imx8mq: updates for the interconnect fabric Martin Kepplinger 2020-12-01 12:39 ` Martin Kepplinger 2020-12-01 12:39 ` Martin Kepplinger [this message] 2020-12-01 12:39 ` [PATCH v2 1/7] arm64: dts: imx8m: Add NOC nodes Martin Kepplinger 2020-12-01 12:56 ` Georgi Djakov 2020-12-01 12:56 ` Georgi Djakov 2020-12-02 8:14 ` Krzysztof Kozlowski 2020-12-02 8:14 ` Krzysztof Kozlowski 2020-12-01 12:39 ` [PATCH v2 2/7] arm64: dts: imx8mq: Add interconnect provider property Martin Kepplinger 2020-12-01 12:39 ` Martin Kepplinger 2020-12-01 12:39 ` [PATCH v2 3/7] arm64: dts: imx8mq: Add interconnect for lcdif Martin Kepplinger 2020-12-01 12:39 ` Martin Kepplinger 2020-12-01 12:39 ` [PATCH v2 4/7] dt-bindings: mxsfb: Add interconnect bindings for LCDIF path Martin Kepplinger 2020-12-01 12:39 ` Martin Kepplinger 2020-12-01 13:46 ` Guido Günther 2020-12-01 13:46 ` Guido Günther 2020-12-01 12:39 ` [PATCH v2 5/7] interconnect: imx8mq: Use icc_sync_state Martin Kepplinger 2020-12-01 12:39 ` Martin Kepplinger 2020-12-01 12:39 ` [PATCH v2 6/7] arm64: defconfig: updates for 5.10 Martin Kepplinger 2020-12-01 12:39 ` Martin Kepplinger 2020-12-02 8:30 ` Georgi Djakov 2020-12-02 8:30 ` Georgi Djakov 2020-12-01 12:39 ` [PATCH v2 7/7] arm64: defconfig: Enable interconnect for imx8mq Martin Kepplinger 2020-12-01 12:39 ` Martin Kepplinger 2020-12-01 13:10 ` Georgi Djakov 2020-12-01 13:10 ` Georgi Djakov 2020-12-01 13:15 ` Martin Kepplinger 2020-12-01 13:15 ` Martin Kepplinger 2020-12-02 8:03 ` Krzysztof Kozlowski 2020-12-02 8:03 ` Krzysztof Kozlowski 2020-12-02 8:05 ` Krzysztof Kozlowski 2020-12-02 8:05 ` Krzysztof Kozlowski 2020-12-02 11:27 ` Martin Kepplinger 2020-12-02 11:27 ` Martin Kepplinger 2020-12-02 12:23 ` Krzysztof Kozlowski 2020-12-02 12:23 ` Krzysztof Kozlowski 2020-12-02 8:02 ` Krzysztof Kozlowski 2020-12-02 8:02 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201201123932.12312-2-martin.kepplinger@puri.sm \ --to=martin.kepplinger@puri.sm \ --cc=catalin.marinas@arm.com \ --cc=cdleonard@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=georgi.djakov@linaro.org \ --cc=kernel@pengutronix.de \ --cc=kernel@puri.sm \ --cc=leonard.crestez@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=robh@kernel.org \ --cc=shawnguo@kernel.org \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.