From: Maxime Ripard <maxime@cerno.tech> To: Daniel Vetter <daniel.vetter@intel.com>, David Airlie <airlied@linux.ie>, Maarten Lankhorst <maarten.lankhorst@linux.intel.com>, Thomas Zimmermann <tzimmermann@suse.de>, Maxime Ripard <maxime@cerno.tech>, Eric Anholt <eric@anholt.net> Cc: linux-rpi-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, linux-arm-kernel@lists.infradead.org, dri-devel@lists.freedesktop.org, Dave Stevenson <dave.stevenson@raspberrypi.com> Subject: [PATCH v3 3/7] drm/vc4: hdmi: Create a custom connector state Date: Tue, 1 Dec 2020 14:12:45 +0100 [thread overview] Message-ID: <20201201131249.438273-4-maxime@cerno.tech> (raw) In-Reply-To: <20201201131249.438273-1-maxime@cerno.tech> When run with a higher bpc than 8, the clock of the HDMI controller needs to be adjusted. Let's create a connector state that will be used at atomic_check and atomic_enable to compute and store the clock rate associated to the state. Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- drivers/gpu/drm/vc4/vc4_hdmi.c | 27 +++++++++++++++++++++++++-- drivers/gpu/drm/vc4/vc4_hdmi.h | 10 ++++++++++ 2 files changed, 35 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index 5a608ed1d75e..9fb7a77c86e8 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -170,16 +170,39 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector) static void vc4_hdmi_connector_reset(struct drm_connector *connector) { - drm_atomic_helper_connector_reset(connector); + struct vc4_hdmi_connector_state *conn_state = kzalloc(sizeof(*conn_state), GFP_KERNEL); + + if (connector->state) + __drm_atomic_helper_connector_destroy_state(connector->state); + + kfree(connector->state); + + __drm_atomic_helper_connector_reset(connector, &conn_state->base); drm_atomic_helper_connector_tv_reset(connector); } +static struct drm_connector_state * +vc4_hdmi_connector_duplicate_state(struct drm_connector *connector) +{ + struct drm_connector_state *conn_state = connector->state; + struct vc4_hdmi_connector_state *vc4_state = conn_state_to_vc4_hdmi_conn_state(conn_state); + struct vc4_hdmi_connector_state *new_state; + + new_state = kzalloc(sizeof(*new_state), GFP_KERNEL); + if (!new_state) + return NULL; + + __drm_atomic_helper_connector_duplicate_state(connector, &new_state->base); + + return &new_state->base; +} + static const struct drm_connector_funcs vc4_hdmi_connector_funcs = { .detect = vc4_hdmi_connector_detect, .fill_modes = drm_helper_probe_single_connector_modes, .destroy = vc4_hdmi_connector_destroy, .reset = vc4_hdmi_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_duplicate_state = vc4_hdmi_connector_duplicate_state, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, }; diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h index 0526a9cf608a..2cf5362052e2 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.h +++ b/drivers/gpu/drm/vc4/vc4_hdmi.h @@ -180,6 +180,16 @@ encoder_to_vc4_hdmi(struct drm_encoder *encoder) return container_of(_encoder, struct vc4_hdmi, encoder); } +struct vc4_hdmi_connector_state { + struct drm_connector_state base; +}; + +static inline struct vc4_hdmi_connector_state * +conn_state_to_vc4_hdmi_conn_state(struct drm_connector_state *conn_state) +{ + return container_of(conn_state, struct vc4_hdmi_connector_state, base); +} + void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi, struct drm_display_mode *mode); void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi); -- 2.28.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime@cerno.tech> To: Daniel Vetter <daniel.vetter@intel.com>, David Airlie <airlied@linux.ie>, Maarten Lankhorst <maarten.lankhorst@linux.intel.com>, Thomas Zimmermann <tzimmermann@suse.de>, Maxime Ripard <maxime@cerno.tech>, Eric Anholt <eric@anholt.net> Cc: linux-rpi-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, linux-arm-kernel@lists.infradead.org, dri-devel@lists.freedesktop.org, Dave Stevenson <dave.stevenson@raspberrypi.com> Subject: [PATCH v3 3/7] drm/vc4: hdmi: Create a custom connector state Date: Tue, 1 Dec 2020 14:12:45 +0100 [thread overview] Message-ID: <20201201131249.438273-4-maxime@cerno.tech> (raw) In-Reply-To: <20201201131249.438273-1-maxime@cerno.tech> When run with a higher bpc than 8, the clock of the HDMI controller needs to be adjusted. Let's create a connector state that will be used at atomic_check and atomic_enable to compute and store the clock rate associated to the state. Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- drivers/gpu/drm/vc4/vc4_hdmi.c | 27 +++++++++++++++++++++++++-- drivers/gpu/drm/vc4/vc4_hdmi.h | 10 ++++++++++ 2 files changed, 35 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index 5a608ed1d75e..9fb7a77c86e8 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -170,16 +170,39 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector) static void vc4_hdmi_connector_reset(struct drm_connector *connector) { - drm_atomic_helper_connector_reset(connector); + struct vc4_hdmi_connector_state *conn_state = kzalloc(sizeof(*conn_state), GFP_KERNEL); + + if (connector->state) + __drm_atomic_helper_connector_destroy_state(connector->state); + + kfree(connector->state); + + __drm_atomic_helper_connector_reset(connector, &conn_state->base); drm_atomic_helper_connector_tv_reset(connector); } +static struct drm_connector_state * +vc4_hdmi_connector_duplicate_state(struct drm_connector *connector) +{ + struct drm_connector_state *conn_state = connector->state; + struct vc4_hdmi_connector_state *vc4_state = conn_state_to_vc4_hdmi_conn_state(conn_state); + struct vc4_hdmi_connector_state *new_state; + + new_state = kzalloc(sizeof(*new_state), GFP_KERNEL); + if (!new_state) + return NULL; + + __drm_atomic_helper_connector_duplicate_state(connector, &new_state->base); + + return &new_state->base; +} + static const struct drm_connector_funcs vc4_hdmi_connector_funcs = { .detect = vc4_hdmi_connector_detect, .fill_modes = drm_helper_probe_single_connector_modes, .destroy = vc4_hdmi_connector_destroy, .reset = vc4_hdmi_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_duplicate_state = vc4_hdmi_connector_duplicate_state, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, }; diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h index 0526a9cf608a..2cf5362052e2 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.h +++ b/drivers/gpu/drm/vc4/vc4_hdmi.h @@ -180,6 +180,16 @@ encoder_to_vc4_hdmi(struct drm_encoder *encoder) return container_of(_encoder, struct vc4_hdmi, encoder); } +struct vc4_hdmi_connector_state { + struct drm_connector_state base; +}; + +static inline struct vc4_hdmi_connector_state * +conn_state_to_vc4_hdmi_conn_state(struct drm_connector_state *conn_state) +{ + return container_of(conn_state, struct vc4_hdmi_connector_state, base); +} + void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi, struct drm_display_mode *mode); void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi); -- 2.28.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-12-01 13:14 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-01 13:12 [PATCH v3 0/7] drm/vc4: hdmi: Support the 10/12 bit output Maxime Ripard 2020-12-01 13:12 ` Maxime Ripard 2020-12-01 13:12 ` [PATCH v3 1/7] drm/vc4: hvs: Align the HVS atomic hooks to the new API Maxime Ripard 2020-12-01 13:12 ` Maxime Ripard 2020-12-01 14:25 ` Thomas Zimmermann 2020-12-01 14:25 ` Thomas Zimmermann 2020-12-01 13:12 ` [PATCH v3 2/7] drm/vc4: Pass the atomic state to encoder hooks Maxime Ripard 2020-12-01 13:12 ` Maxime Ripard 2020-12-01 13:12 ` Maxime Ripard [this message] 2020-12-01 13:12 ` [PATCH v3 3/7] drm/vc4: hdmi: Create a custom connector state Maxime Ripard 2020-12-01 13:12 ` [PATCH v3 4/7] drm/vc4: hdmi: Store pixel frequency in the " Maxime Ripard 2020-12-01 13:12 ` Maxime Ripard 2020-12-01 13:12 ` [PATCH v3 5/7] drm/vc4: hdmi: Use the connector state pixel rate for the PHY Maxime Ripard 2020-12-01 13:12 ` Maxime Ripard 2020-12-01 13:12 ` [PATCH v3 6/7] drm/vc4: hdmi: Limit the BCM2711 to the max without scrambling Maxime Ripard 2020-12-01 13:12 ` Maxime Ripard 2020-12-01 13:12 ` [PATCH v3 7/7] drm/vc4: hdmi: Enable 10/12 bpc output Maxime Ripard 2020-12-01 13:12 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201201131249.438273-4-maxime@cerno.tech \ --to=maxime@cerno.tech \ --cc=airlied@linux.ie \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=daniel.vetter@intel.com \ --cc=dave.stevenson@raspberrypi.com \ --cc=dri-devel@lists.freedesktop.org \ --cc=eric@anholt.net \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=maarten.lankhorst@linux.intel.com \ --cc=tzimmermann@suse.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.