[PATCH v3 5/7] drm/vc4: hdmi: Use the connector state pixel rate for the PHY

From: Maxime Ripard <maxime@cerno.tech>
To: Daniel Vetter <daniel.vetter@intel.com>,
	David Airlie <airlied@linux.ie>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>, Eric Anholt <eric@anholt.net>
Cc: linux-rpi-kernel@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	dri-devel@lists.freedesktop.org,
	Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH v3 5/7] drm/vc4: hdmi: Use the connector state pixel rate for the PHY
Date: Tue,  1 Dec 2020 14:12:47 +0100	[thread overview]
Message-ID: <20201201131249.438273-6-maxime@cerno.tech> (raw)
In-Reply-To: <20201201131249.438273-1-maxime@cerno.tech>

The PHY initialisation parameters are not based on the pixel clock but
the TMDS clock rate which can be the pixel clock in the standard case,
but could be adjusted based on some parameters like the bits per color.

Since the TMDS clock rate is stored in our custom connector state
already, let's reuse it from there instead of computing it again.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c     | 2 +-
 drivers/gpu/drm/vc4/vc4_hdmi.h     | 9 ++++-----
 drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 8 +++++---
 3 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 61baf3c39d43..64eff72d60b2 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -712,7 +712,7 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 		vc4_hdmi->variant->reset(vc4_hdmi);
 
 	if (vc4_hdmi->variant->phy_init)
-		vc4_hdmi->variant->phy_init(vc4_hdmi, mode);
+		vc4_hdmi->variant->phy_init(vc4_hdmi, vc4_conn_state);
 
 	HDMI_WRITE(HDMI_SCHEDULER_CONTROL,
 		   HDMI_READ(HDMI_SCHEDULER_CONTROL) |
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index bca6943de884..6cc5b6652cca 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -21,10 +21,9 @@ to_vc4_hdmi_encoder(struct drm_encoder *encoder)
 	return container_of(encoder, struct vc4_hdmi_encoder, base.base);
 }
 
-struct drm_display_mode;
-
 struct vc4_hdmi;
 struct vc4_hdmi_register;
+struct vc4_hdmi_connector_state;
 
 enum vc4_hdmi_phy_channel {
 	PHY_LANE_0 = 0,
@@ -82,7 +81,7 @@ struct vc4_hdmi_variant {
 
 	/* Callback to initialize the PHY according to the mode */
 	void (*phy_init)(struct vc4_hdmi *vc4_hdmi,
-			 struct drm_display_mode *mode);
+			 struct vc4_hdmi_connector_state *vc4_conn_state);
 
 	/* Callback to disable the PHY */
 	void (*phy_disable)(struct vc4_hdmi *vc4_hdmi);
@@ -192,13 +191,13 @@ conn_state_to_vc4_hdmi_conn_state(struct drm_connector_state *conn_state)
 }
 
 void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
-		       struct drm_display_mode *mode);
+		       struct vc4_hdmi_connector_state *vc4_conn_state);
 void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi);
 void vc4_hdmi_phy_rng_enable(struct vc4_hdmi *vc4_hdmi);
 void vc4_hdmi_phy_rng_disable(struct vc4_hdmi *vc4_hdmi);
 
 void vc5_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
-		       struct drm_display_mode *mode);
+		       struct vc4_hdmi_connector_state *vc4_conn_state);
 void vc5_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi);
 void vc5_hdmi_phy_rng_enable(struct vc4_hdmi *vc4_hdmi);
 void vc5_hdmi_phy_rng_disable(struct vc4_hdmi *vc4_hdmi);
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi_phy.c b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
index 057796b54c51..36535480f8e2 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
@@ -127,7 +127,8 @@
 
 #define OSCILLATOR_FREQUENCY	54000000
 
-void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi, struct drm_display_mode *mode)
+void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
+		       struct vc4_hdmi_connector_state *conn_state)
 {
 	/* PHY should be in reset, like
 	 * vc4_hdmi_encoder_disable() does.
@@ -339,11 +340,12 @@ static void vc5_hdmi_reset_phy(struct vc4_hdmi *vc4_hdmi)
 	HDMI_WRITE(HDMI_TX_PHY_POWERDOWN_CTL, BIT(10));
 }
 
-void vc5_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi, struct drm_display_mode *mode)
+void vc5_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
+		       struct vc4_hdmi_connector_state *conn_state)
 {
 	const struct phy_lane_settings *chan0_settings, *chan1_settings, *chan2_settings, *clock_settings;
 	const struct vc4_hdmi_variant *variant = vc4_hdmi->variant;
-	unsigned long long pixel_freq = mode->clock * 1000;
+	unsigned long long pixel_freq = conn_state->pixel_rate;
 	unsigned long long vco_freq;
 	unsigned char word_sel;
 	u8 vco_sel, vco_div;
-- 
2.28.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
