All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Vidya Sagar <vidyas@nvidia.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Krishna Kishore <kthota@nvidia.com>,
	Manikanta Maddireddy <mmaddireddy@nvidia.com>,
	Vidya Sagar <sagar.tv@gmail.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH v3 1/3] PCI/MSI: Move MSI/MSI-X init to msi.c
Date: Thu,  3 Dec 2020 12:51:08 -0600	[thread overview]
Message-ID: <20201203185110.1583077-2-helgaas@kernel.org> (raw)
In-Reply-To: <20201203185110.1583077-1-helgaas@kernel.org>

From: Bjorn Helgaas <bhelgaas@google.com>

Move pci_msi_setup_pci_dev(), which disables MSI and MSI-X interrupts, from
probe.c to msi.c so it's with all the other MSI code and more consistent
with other capability initialization.  This means we must compile msi.c
always, even without CONFIG_PCI_MSI, so wrap the rest of msi.c in an #ifdef
and adjust the Makefile accordingly.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/Makefile |  3 +--
 drivers/pci/msi.c    | 36 ++++++++++++++++++++++++++++++++++++
 drivers/pci/pci.h    |  2 ++
 drivers/pci/probe.c  | 21 ++-------------------
 4 files changed, 41 insertions(+), 21 deletions(-)

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 522d2b974e91..11cc79411e2d 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -5,7 +5,7 @@
 obj-$(CONFIG_PCI)		+= access.o bus.o probe.o host-bridge.o \
 				   remove.o pci.o pci-driver.o search.o \
 				   pci-sysfs.o rom.o setup-res.o irq.o vpd.o \
-				   setup-bus.o vc.o mmap.o setup-irq.o
+				   setup-bus.o vc.o mmap.o setup-irq.o msi.o
 
 obj-$(CONFIG_PCI)		+= pcie/
 
@@ -18,7 +18,6 @@ endif
 obj-$(CONFIG_OF)		+= of.o
 obj-$(CONFIG_PCI_QUIRKS)	+= quirks.o
 obj-$(CONFIG_HOTPLUG_PCI)	+= hotplug/
-obj-$(CONFIG_PCI_MSI)		+= msi.o
 obj-$(CONFIG_PCI_ATS)		+= ats.o
 obj-$(CONFIG_PCI_IOV)		+= iov.o
 obj-$(CONFIG_PCI_BRIDGE_EMUL)	+= pci-bridge-emul.o
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d52d118979a6..555791c0ee1a 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -26,6 +26,8 @@
 
 #include "pci.h"
 
+#ifdef CONFIG_MSI
+
 static int pci_msi_enable = 1;
 int pci_msi_ignore_mask;
 
@@ -1577,3 +1579,37 @@ bool pci_dev_has_special_msi_domain(struct pci_dev *pdev)
 }
 
 #endif /* CONFIG_PCI_MSI_IRQ_DOMAIN */
+#endif /* CONFIG_PCI_MSI */
+
+void pci_msi_init(struct pci_dev *dev)
+{
+	u16 ctrl;
+
+	/*
+	 * Disable the MSI hardware to avoid screaming interrupts
+	 * during boot.  This is the power on reset default so
+	 * usually this should be a noop.
+	 */
+	dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI);
+	if (!dev->msi_cap)
+		return;
+
+	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &ctrl);
+	if (ctrl & PCI_MSI_FLAGS_ENABLE)
+		pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS,
+				      ctrl & ~PCI_MSI_FLAGS_ENABLE);
+}
+
+void pci_msix_init(struct pci_dev *dev)
+{
+	u16 ctrl;
+
+	dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+	if (!dev->msix_cap)
+		return;
+
+	pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &ctrl);
+	if (ctrl & PCI_MSIX_FLAGS_ENABLE)
+		pci_write_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS,
+				      ctrl & ~PCI_MSIX_FLAGS_ENABLE);
+}
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index f86cae9aa1f4..3f5f303775c4 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -104,6 +104,8 @@ void pci_config_pm_runtime_get(struct pci_dev *dev);
 void pci_config_pm_runtime_put(struct pci_dev *dev);
 void pci_pm_init(struct pci_dev *dev);
 void pci_ea_init(struct pci_dev *dev);
+void pci_msi_init(struct pci_dev *dev);
+void pci_msix_init(struct pci_dev *dev);
 void pci_allocate_cap_save_buffers(struct pci_dev *dev);
 void pci_free_cap_save_buffers(struct pci_dev *dev);
 bool pci_bridge_d3_possible(struct pci_dev *dev);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 4289030b0fff..50b480c016bf 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1716,22 +1716,6 @@ static u8 pci_hdr_type(struct pci_dev *dev)
 
 #define LEGACY_IO_RESOURCE	(IORESOURCE_IO | IORESOURCE_PCI_FIXED)
 
-static void pci_msi_setup_pci_dev(struct pci_dev *dev)
-{
-	/*
-	 * Disable the MSI hardware to avoid screaming interrupts
-	 * during boot.  This is the power on reset default so
-	 * usually this should be a noop.
-	 */
-	dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI);
-	if (dev->msi_cap)
-		pci_msi_set_enable(dev, 0);
-
-	dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
-	if (dev->msix_cap)
-		pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
-}
-
 /**
  * pci_intx_mask_broken - Test PCI_COMMAND_INTX_DISABLE writability
  * @dev: PCI device
@@ -2397,9 +2381,8 @@ void pcie_report_downtraining(struct pci_dev *dev)
 static void pci_init_capabilities(struct pci_dev *dev)
 {
 	pci_ea_init(dev);		/* Enhanced Allocation */
-
-	/* Setup MSI caps & disable MSI/MSI-X interrupts */
-	pci_msi_setup_pci_dev(dev);
+	pci_msi_init(dev);		/* Disable MSI */
+	pci_msix_init(dev);		/* Disable MSI-X */
 
 	/* Buffers for saving PCIe and PCI-X capabilities */
 	pci_allocate_cap_save_buffers(dev);
-- 
2.25.1


  reply	other threads:[~2020-12-03 18:52 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-03 18:51 [PATCH v3 0/3] PCI/MSI: Cleanup init and improve 32-bit MSI checking Bjorn Helgaas
2020-12-03 18:51 ` Bjorn Helgaas [this message]
2020-12-04 11:05   ` [PATCH v3 1/3] PCI/MSI: Move MSI/MSI-X init to msi.c Thierry Reding
2020-12-04 18:11     ` Bjorn Helgaas
2020-12-03 18:51 ` [PATCH v3 2/3] PCI/MSI: Move MSI/MSI-X flags updaters " Bjorn Helgaas
2020-12-04 11:06   ` Thierry Reding
2020-12-03 18:51 ` [PATCH v3 3/3] PCI/MSI: Set device flag indicating only 32-bit MSI support Bjorn Helgaas
2020-12-04 11:07   ` Thierry Reding
2020-12-04 18:21 ` [PATCH v3 0/3] PCI/MSI: Cleanup init and improve 32-bit MSI checking Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201203185110.1583077-2-helgaas@kernel.org \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=jonathanh@nvidia.com \
    --cc=kthota@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mmaddireddy@nvidia.com \
    --cc=sagar.tv@gmail.com \
    --cc=thierry.reding@gmail.com \
    --cc=vidyas@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.