From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> To: linux-kernel@vger.kernel.org, iommu@lists.linux-foundation.org Cc: joro@8bytes.org, will@kernel.org, jsnitsel@redhat.com, Jon.Grimm@amd.com, thomas.lendacky@amd.com, Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Subject: [PATCH] iommu/amd: Add sanity check for interrupt remapping table length macros Date: Thu, 10 Dec 2020 10:24:36 -0600 [thread overview] Message-ID: <20201210162436.126321-1-suravee.suthikulpanit@amd.com> (raw) Currently, macros related to the interrupt remapping table length are defined separately. This has resulted in an oversight in which one of the macros were missed when changing the length. To prevent this, redefine the macros to add built-in sanity check. Also, rename macros to use the name of the DTE[IntTabLen] field as specified in the AMD IOMMU specification. There is no functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Will Deacon <will@kernel.org> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> --- drivers/iommu/amd/amd_iommu_types.h | 19 ++++++++++--------- drivers/iommu/amd/init.c | 6 +++--- drivers/iommu/amd/iommu.c | 2 +- 3 files changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/iommu/amd/amd_iommu_types.h b/drivers/iommu/amd/amd_iommu_types.h index 494b42a31b7a..899ce62df3f0 100644 --- a/drivers/iommu/amd/amd_iommu_types.h +++ b/drivers/iommu/amd/amd_iommu_types.h @@ -255,11 +255,19 @@ /* Bit value definition for dte irq remapping fields*/ #define DTE_IRQ_PHYS_ADDR_MASK (((1ULL << 45)-1) << 6) #define DTE_IRQ_REMAP_INTCTL_MASK (0x3ULL << 60) -#define DTE_IRQ_TABLE_LEN_MASK (0xfULL << 1) #define DTE_IRQ_REMAP_INTCTL (2ULL << 60) -#define DTE_IRQ_TABLE_LEN (9ULL << 1) #define DTE_IRQ_REMAP_ENABLE 1ULL +/* + * AMD IOMMU hardware only support 512 IRTEs despite + * the architectural limitation of 2048 entries. + */ +#define DTE_INTTAB_ALIGNMENT 128 +#define DTE_INTTABLEN_VALUE 9ULL +#define DTE_INTTABLEN (DTE_INTTABLEN_VALUE << 1) +#define DTE_INTTABLEN_MASK (0xfULL << 1) +#define MAX_IRQS_PER_TABLE (1 << DTE_INTTABLEN_VALUE) + #define PAGE_MODE_NONE 0x00 #define PAGE_MODE_1_LEVEL 0x01 #define PAGE_MODE_2_LEVEL 0x02 @@ -409,13 +417,6 @@ extern bool amd_iommu_np_cache; /* Only true if all IOMMUs support device IOTLBs */ extern bool amd_iommu_iotlb_sup; -/* - * AMD IOMMU hardware only support 512 IRTEs despite - * the architectural limitation of 2048 entries. - */ -#define MAX_IRQS_PER_TABLE 512 -#define IRQ_TABLE_ALIGNMENT 128 - struct irq_remap_table { raw_spinlock_t lock; unsigned min_index; diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c index 23a790f8f550..6bec8913d064 100644 --- a/drivers/iommu/amd/init.c +++ b/drivers/iommu/amd/init.c @@ -989,10 +989,10 @@ static bool copy_device_table(void) irq_v = old_devtb[devid].data[2] & DTE_IRQ_REMAP_ENABLE; int_ctl = old_devtb[devid].data[2] & DTE_IRQ_REMAP_INTCTL_MASK; - int_tab_len = old_devtb[devid].data[2] & DTE_IRQ_TABLE_LEN_MASK; + int_tab_len = old_devtb[devid].data[2] & DTE_INTTABLEN_MASK; if (irq_v && (int_ctl || int_tab_len)) { if ((int_ctl != DTE_IRQ_REMAP_INTCTL) || - (int_tab_len != DTE_IRQ_TABLE_LEN)) { + (int_tab_len != DTE_INTTABLEN)) { pr_err("Wrong old irq remapping flag: %#x\n", devid); return false; } @@ -2674,7 +2674,7 @@ static int __init early_amd_iommu_init(void) remap_cache_sz = MAX_IRQS_PER_TABLE * (sizeof(u64) * 2); amd_iommu_irq_cache = kmem_cache_create("irq_remap_cache", remap_cache_sz, - IRQ_TABLE_ALIGNMENT, + DTE_INTTAB_ALIGNMENT, 0, NULL); if (!amd_iommu_irq_cache) goto out; diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c index b9cf59443843..f7abf16d1e3a 100644 --- a/drivers/iommu/amd/iommu.c +++ b/drivers/iommu/amd/iommu.c @@ -3191,7 +3191,7 @@ static void set_dte_irq_entry(u16 devid, struct irq_remap_table *table) dte &= ~DTE_IRQ_PHYS_ADDR_MASK; dte |= iommu_virt_to_phys(table->table); dte |= DTE_IRQ_REMAP_INTCTL; - dte |= DTE_IRQ_TABLE_LEN; + dte |= DTE_INTTABLEN; dte |= DTE_IRQ_REMAP_ENABLE; amd_iommu_dev_table[devid].data[2] = dte; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> To: linux-kernel@vger.kernel.org, iommu@lists.linux-foundation.org Cc: thomas.lendacky@amd.com, Jon.Grimm@amd.com, will@kernel.org Subject: [PATCH] iommu/amd: Add sanity check for interrupt remapping table length macros Date: Thu, 10 Dec 2020 10:24:36 -0600 [thread overview] Message-ID: <20201210162436.126321-1-suravee.suthikulpanit@amd.com> (raw) Currently, macros related to the interrupt remapping table length are defined separately. This has resulted in an oversight in which one of the macros were missed when changing the length. To prevent this, redefine the macros to add built-in sanity check. Also, rename macros to use the name of the DTE[IntTabLen] field as specified in the AMD IOMMU specification. There is no functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Will Deacon <will@kernel.org> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> --- drivers/iommu/amd/amd_iommu_types.h | 19 ++++++++++--------- drivers/iommu/amd/init.c | 6 +++--- drivers/iommu/amd/iommu.c | 2 +- 3 files changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/iommu/amd/amd_iommu_types.h b/drivers/iommu/amd/amd_iommu_types.h index 494b42a31b7a..899ce62df3f0 100644 --- a/drivers/iommu/amd/amd_iommu_types.h +++ b/drivers/iommu/amd/amd_iommu_types.h @@ -255,11 +255,19 @@ /* Bit value definition for dte irq remapping fields*/ #define DTE_IRQ_PHYS_ADDR_MASK (((1ULL << 45)-1) << 6) #define DTE_IRQ_REMAP_INTCTL_MASK (0x3ULL << 60) -#define DTE_IRQ_TABLE_LEN_MASK (0xfULL << 1) #define DTE_IRQ_REMAP_INTCTL (2ULL << 60) -#define DTE_IRQ_TABLE_LEN (9ULL << 1) #define DTE_IRQ_REMAP_ENABLE 1ULL +/* + * AMD IOMMU hardware only support 512 IRTEs despite + * the architectural limitation of 2048 entries. + */ +#define DTE_INTTAB_ALIGNMENT 128 +#define DTE_INTTABLEN_VALUE 9ULL +#define DTE_INTTABLEN (DTE_INTTABLEN_VALUE << 1) +#define DTE_INTTABLEN_MASK (0xfULL << 1) +#define MAX_IRQS_PER_TABLE (1 << DTE_INTTABLEN_VALUE) + #define PAGE_MODE_NONE 0x00 #define PAGE_MODE_1_LEVEL 0x01 #define PAGE_MODE_2_LEVEL 0x02 @@ -409,13 +417,6 @@ extern bool amd_iommu_np_cache; /* Only true if all IOMMUs support device IOTLBs */ extern bool amd_iommu_iotlb_sup; -/* - * AMD IOMMU hardware only support 512 IRTEs despite - * the architectural limitation of 2048 entries. - */ -#define MAX_IRQS_PER_TABLE 512 -#define IRQ_TABLE_ALIGNMENT 128 - struct irq_remap_table { raw_spinlock_t lock; unsigned min_index; diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c index 23a790f8f550..6bec8913d064 100644 --- a/drivers/iommu/amd/init.c +++ b/drivers/iommu/amd/init.c @@ -989,10 +989,10 @@ static bool copy_device_table(void) irq_v = old_devtb[devid].data[2] & DTE_IRQ_REMAP_ENABLE; int_ctl = old_devtb[devid].data[2] & DTE_IRQ_REMAP_INTCTL_MASK; - int_tab_len = old_devtb[devid].data[2] & DTE_IRQ_TABLE_LEN_MASK; + int_tab_len = old_devtb[devid].data[2] & DTE_INTTABLEN_MASK; if (irq_v && (int_ctl || int_tab_len)) { if ((int_ctl != DTE_IRQ_REMAP_INTCTL) || - (int_tab_len != DTE_IRQ_TABLE_LEN)) { + (int_tab_len != DTE_INTTABLEN)) { pr_err("Wrong old irq remapping flag: %#x\n", devid); return false; } @@ -2674,7 +2674,7 @@ static int __init early_amd_iommu_init(void) remap_cache_sz = MAX_IRQS_PER_TABLE * (sizeof(u64) * 2); amd_iommu_irq_cache = kmem_cache_create("irq_remap_cache", remap_cache_sz, - IRQ_TABLE_ALIGNMENT, + DTE_INTTAB_ALIGNMENT, 0, NULL); if (!amd_iommu_irq_cache) goto out; diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c index b9cf59443843..f7abf16d1e3a 100644 --- a/drivers/iommu/amd/iommu.c +++ b/drivers/iommu/amd/iommu.c @@ -3191,7 +3191,7 @@ static void set_dte_irq_entry(u16 devid, struct irq_remap_table *table) dte &= ~DTE_IRQ_PHYS_ADDR_MASK; dte |= iommu_virt_to_phys(table->table); dte |= DTE_IRQ_REMAP_INTCTL; - dte |= DTE_IRQ_TABLE_LEN; + dte |= DTE_INTTABLEN; dte |= DTE_IRQ_REMAP_ENABLE; amd_iommu_dev_table[devid].data[2] = dte; -- 2.17.1 _______________________________________________ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
next reply other threads:[~2020-12-10 16:23 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-10 16:24 Suravee Suthikulpanit [this message] 2020-12-10 16:24 ` [PATCH] iommu/amd: Add sanity check for interrupt remapping table length macros Suravee Suthikulpanit 2020-12-10 17:29 ` Jerry Snitselaar 2020-12-10 17:29 ` Jerry Snitselaar 2020-12-11 13:10 ` Will Deacon 2020-12-11 13:10 ` Will Deacon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201210162436.126321-1-suravee.suthikulpanit@amd.com \ --to=suravee.suthikulpanit@amd.com \ --cc=Jon.Grimm@amd.com \ --cc=iommu@lists.linux-foundation.org \ --cc=joro@8bytes.org \ --cc=jsnitsel@redhat.com \ --cc=linux-kernel@vger.kernel.org \ --cc=thomas.lendacky@amd.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.