All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jack Pham <jackp@codeaurora.org>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, Mayank Rana <mrana@codeaurora.org>,
	Jack Pham <jackp@codeaurora.org>
Subject: [PATCH] usb: typec: ucsi: Add support for USB role switch
Date: Wed, 16 Dec 2020 22:20:47 -0800	[thread overview]
Message-ID: <20201217062047.13126-1-jackp@codeaurora.org> (raw)

From: Mayank Rana <mrana@codeaurora.org>

UCSI already conveys the information about a port's connection
status, whether it is operating in UFP or DFP mode, and whether the
partner supports USB data or not. This information can be used to
notify a dual-role controller to start up its host or peripheral
mode accordingly. Add optional support for this by querying each
port's fwnode to look for an associated USB role switch device.
If present, call usb_role_switch_set() with the determined data
role upon Connect Change or Connector Partner Change updates.

Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
---
 drivers/usb/typec/ucsi/ucsi.c | 55 +++++++++++++++++++++++++++++++++--
 drivers/usb/typec/ucsi/ucsi.h |  3 ++
 2 files changed, 55 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 51a570d40a42..8d3e3518a506 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -588,6 +588,7 @@ static void ucsi_unregister_partner(struct ucsi_connector *con)
 
 static void ucsi_partner_change(struct ucsi_connector *con)
 {
+	enum usb_role u_role = USB_ROLE_NONE;
 	int ret;
 
 	if (!con->partner)
@@ -595,11 +596,14 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 
 	switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
 	case UCSI_CONSTAT_PARTNER_TYPE_UFP:
-	case UCSI_CONSTAT_PARTNER_TYPE_CABLE:
 	case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP:
+		u_role = USB_ROLE_HOST;
+		fallthrough;
+	case UCSI_CONSTAT_PARTNER_TYPE_CABLE:
 		typec_set_data_role(con->port, TYPEC_HOST);
 		break;
 	case UCSI_CONSTAT_PARTNER_TYPE_DFP:
+		u_role = USB_ROLE_DEVICE;
 		typec_set_data_role(con->port, TYPEC_DEVICE);
 		break;
 	default:
@@ -610,6 +614,15 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 	if (!completion_done(&con->complete))
 		complete(&con->complete);
 
+	/* Only notify USB controller if partner supports USB data */
+	if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) & UCSI_CONSTAT_PARTNER_FLAG_USB))
+		u_role = USB_ROLE_NONE;
+
+	ret = usb_role_switch_set_role(con->usb_role_sw, u_role);
+	if (ret)
+		dev_err(con->ucsi->dev, "con:%d: failed to set usb role:%d\n",
+			con->num, u_role);
+
 	/* Can't rely on Partner Flags field. Always checking the alt modes. */
 	ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
 	if (ret)
@@ -626,6 +639,7 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 						  work);
 	struct ucsi *ucsi = con->ucsi;
 	enum typec_role role;
+	enum usb_role u_role = USB_ROLE_NONE;
 	u64 command;
 	int ret;
 
@@ -661,11 +675,14 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 
 		switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
 		case UCSI_CONSTAT_PARTNER_TYPE_UFP:
-		case UCSI_CONSTAT_PARTNER_TYPE_CABLE:
 		case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP:
+			u_role = USB_ROLE_HOST;
+			fallthrough;
+		case UCSI_CONSTAT_PARTNER_TYPE_CABLE:
 			typec_set_data_role(con->port, TYPEC_HOST);
 			break;
 		case UCSI_CONSTAT_PARTNER_TYPE_DFP:
+			u_role = USB_ROLE_DEVICE;
 			typec_set_data_role(con->port, TYPEC_DEVICE);
 			break;
 		default:
@@ -678,6 +695,16 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 			ucsi_unregister_partner(con);
 
 		ucsi_port_psy_changed(con);
+
+		/* Only notify USB controller if partner supports USB data */
+		if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) &
+				UCSI_CONSTAT_PARTNER_FLAG_USB))
+			u_role = USB_ROLE_NONE;
+
+		ret = usb_role_switch_set_role(con->usb_role_sw, u_role);
+		if (ret)
+			dev_err(ucsi->dev, "con:%d: failed to set usb role:%d\n",
+				con->num, u_role);
 	}
 
 	if (con->status.change & UCSI_CONSTAT_CAM_CHANGE) {
@@ -903,6 +930,7 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 	struct ucsi_connector *con = &ucsi->connector[index];
 	struct typec_capability *cap = &con->typec_cap;
 	enum typec_accessory *accessory = cap->accessory;
+	enum usb_role u_role = USB_ROLE_NONE;
 	u64 command;
 	int ret;
 
@@ -981,11 +1009,14 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 
 	switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
 	case UCSI_CONSTAT_PARTNER_TYPE_UFP:
-	case UCSI_CONSTAT_PARTNER_TYPE_CABLE:
 	case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP:
+		u_role = USB_ROLE_HOST;
+		fallthrough;
+	case UCSI_CONSTAT_PARTNER_TYPE_CABLE:
 		typec_set_data_role(con->port, TYPEC_HOST);
 		break;
 	case UCSI_CONSTAT_PARTNER_TYPE_DFP:
+		u_role = USB_ROLE_DEVICE;
 		typec_set_data_role(con->port, TYPEC_DEVICE);
 		break;
 	default:
@@ -1001,6 +1032,24 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 		ucsi_port_psy_changed(con);
 	}
 
+	con->usb_role_sw = fwnode_usb_role_switch_get(cap->fwnode);
+	if (IS_ERR(con->usb_role_sw)) {
+		dev_err(ucsi->dev, "con%d: failed to get usb role switch\n",
+			con->num);
+		con->usb_role_sw = NULL;
+	}
+
+	/* Only notify USB controller if partner supports USB data */
+	if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) & UCSI_CONSTAT_PARTNER_FLAG_USB))
+		u_role = USB_ROLE_NONE;
+
+	ret = usb_role_switch_set_role(con->usb_role_sw, u_role);
+	if (ret) {
+		dev_err(ucsi->dev, "con:%d: failed to set usb role:%d\n",
+			con->num, u_role);
+		ret = 0;
+	}
+
 	if (con->partner) {
 		ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
 		if (ret) {
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index b7a92f246050..8474342b79a7 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -8,6 +8,7 @@
 #include <linux/power_supply.h>
 #include <linux/types.h>
 #include <linux/usb/typec.h>
+#include <linux/usb/role.h>
 
 /* -------------------------------------------------------------------------- */
 
@@ -329,6 +330,8 @@ struct ucsi_connector {
 	u32 rdo;
 	u32 src_pdos[UCSI_MAX_PDOS];
 	int num_pdos;
+
+	struct usb_role_switch *usb_role_sw;
 };
 
 int ucsi_send_command(struct ucsi *ucsi, u64 command,
-- 
2.24.0

The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

             reply	other threads:[~2020-12-17  6:22 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-17  6:20 Jack Pham [this message]
2021-01-07 13:40 ` [PATCH] usb: typec: ucsi: Add support for USB role switch Heikki Krogerus
2021-01-11 20:49 ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201217062047.13126-1-jackp@codeaurora.org \
    --to=jackp@codeaurora.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=mrana@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.