From: Christian Hewitt <christianshewitt@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH 4/5] boards: amlogic: add Beelink GT-King Pro defconfig
Date: Fri, 18 Dec 2020 08:45:44 +0000 [thread overview]
Message-ID: <20201218084545.29135-5-christianshewitt@gmail.com> (raw)
In-Reply-To: <20201218084545.29135-1-christianshewitt@gmail.com>
Add a defconfig for the Beelink GT-King Pro Android STB, which is based
on the Amlogic W400 reference design.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
configs/beelink-gtkingpro_defconfig | 71 +++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 configs/beelink-gtkingpro_defconfig
diff --git a/configs/beelink-gtkingpro_defconfig b/configs/beelink-gtkingpro_defconfig
new file mode 100644
index 0000000000..569031600a
--- /dev/null
+++ b/configs/beelink-gtkingpro_defconfig
@@ -0,0 +1,71 @@
+CONFIG_ARM=y
+CONFIG_SYS_BOARD="beelink-s922x"
+CONFIG_ARCH_MESON=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x2000
+CONFIG_DM_GPIO=y
+CONFIG_MESON_G12A=y
+CONFIG_DEBUG_UART_BASE=0xff803000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_IDENT_STRING=" beelink"
+CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-gtking-pro"
+CONFIG_DEBUG_UART=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+CONFIG_OF_CONTROL=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MESON_G12A_USB_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_MESON_G12A=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MESON_EE_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_MESON_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_DWC3_MESON_G12A=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
+CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_DM_VIDEO=y
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP16 is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_VIDEO_MESON=y
+CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
+CONFIG_OF_LIBFDT_OVERLAY=y
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Christian Hewitt <christianshewitt@gmail.com>
To: u-boot@lists.denx.de, u-boot-amlogic@groups.io,
linux-amlogic@lists.infradead.org
Cc: Christian Hewitt <christianshewitt@gmail.com>
Subject: [PATCH 4/5] boards: amlogic: add Beelink GT-King Pro defconfig
Date: Fri, 18 Dec 2020 08:45:44 +0000 [thread overview]
Message-ID: <20201218084545.29135-5-christianshewitt@gmail.com> (raw)
In-Reply-To: <20201218084545.29135-1-christianshewitt@gmail.com>
Add a defconfig for the Beelink GT-King Pro Android STB, which is based
on the Amlogic W400 reference design.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
configs/beelink-gtkingpro_defconfig | 71 +++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 configs/beelink-gtkingpro_defconfig
diff --git a/configs/beelink-gtkingpro_defconfig b/configs/beelink-gtkingpro_defconfig
new file mode 100644
index 0000000000..569031600a
--- /dev/null
+++ b/configs/beelink-gtkingpro_defconfig
@@ -0,0 +1,71 @@
+CONFIG_ARM=y
+CONFIG_SYS_BOARD="beelink-s922x"
+CONFIG_ARCH_MESON=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x2000
+CONFIG_DM_GPIO=y
+CONFIG_MESON_G12A=y
+CONFIG_DEBUG_UART_BASE=0xff803000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_IDENT_STRING=" beelink"
+CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-gtking-pro"
+CONFIG_DEBUG_UART=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+CONFIG_OF_CONTROL=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MESON_G12A_USB_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_MESON_G12A=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MESON_EE_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_MESON_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_DWC3_MESON_G12A=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
+CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_DM_VIDEO=y
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP16 is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_VIDEO_MESON=y
+CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
+CONFIG_OF_LIBFDT_OVERLAY=y
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Christian Hewitt <christianshewitt@gmail.com>
To: u-boot@lists.denx.de, u-boot-amlogic@groups.io,
linux-amlogic@lists.infradead.org
Cc: Christian Hewitt <christianshewitt@gmail.com>
Subject: [PATCH 4/5] boards: amlogic: add Beelink GT-King Pro defconfig
Date: Fri, 18 Dec 2020 08:45:44 +0000 [thread overview]
Message-ID: <20201218084545.29135-5-christianshewitt@gmail.com> (raw)
In-Reply-To: <20201218084545.29135-1-christianshewitt@gmail.com>
Add a defconfig for the Beelink GT-King Pro Android STB, which is based
on the Amlogic W400 reference design.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
configs/beelink-gtkingpro_defconfig | 71 +++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 configs/beelink-gtkingpro_defconfig
diff --git a/configs/beelink-gtkingpro_defconfig b/configs/beelink-gtkingpro_defconfig
new file mode 100644
index 0000000000..569031600a
--- /dev/null
+++ b/configs/beelink-gtkingpro_defconfig
@@ -0,0 +1,71 @@
+CONFIG_ARM=y
+CONFIG_SYS_BOARD="beelink-s922x"
+CONFIG_ARCH_MESON=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x2000
+CONFIG_DM_GPIO=y
+CONFIG_MESON_G12A=y
+CONFIG_DEBUG_UART_BASE=0xff803000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_IDENT_STRING=" beelink"
+CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-gtking-pro"
+CONFIG_DEBUG_UART=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+CONFIG_OF_CONTROL=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MESON_G12A_USB_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_MESON_G12A=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MESON_EE_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_MESON_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_DWC3_MESON_G12A=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
+CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_DM_VIDEO=y
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP16 is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_VIDEO_MESON=y
+CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
+CONFIG_OF_LIBFDT_OVERLAY=y
--
2.17.1
next prev parent reply other threads:[~2020-12-18 8:45 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-18 8:45 [PATCH 0/5] board: amlogic: add Beelink GT-King/Pro support Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 8:45 ` [PATCH 1/5] ARM: dts: import Beelink GT-King/Pro DTs from Linux 5.10 Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 9:42 ` Neil Armstrong
2020-12-18 9:42 ` Neil Armstrong
2020-12-18 9:42 ` Neil Armstrong
2020-12-18 8:45 ` [PATCH 2/5] boards: amlogic: add Beelink S922X board family support Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 9:42 ` Neil Armstrong
2020-12-18 9:42 ` Neil Armstrong
2020-12-18 9:42 ` Neil Armstrong
2020-12-18 8:45 ` [PATCH 3/5] boards: amlogic: add Beelink GT-King defconfig Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 9:43 ` Neil Armstrong
2020-12-18 9:43 ` Neil Armstrong
2020-12-18 9:43 ` Neil Armstrong
2020-12-18 8:45 ` Christian Hewitt [this message]
2020-12-18 8:45 ` [PATCH 4/5] boards: amlogic: add Beelink GT-King Pro defconfig Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 9:43 ` Neil Armstrong
2020-12-18 9:43 ` Neil Armstrong
2020-12-18 9:43 ` Neil Armstrong
2020-12-18 8:45 ` [PATCH 5/5] boards: amlogic: update documentation for Beelink GT-King/Pro Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 9:47 ` Neil Armstrong
2020-12-18 9:47 ` Neil Armstrong
2020-12-18 9:47 ` Neil Armstrong
2020-12-18 9:49 ` [PATCH 0/5] board: amlogic: add Beelink GT-King/Pro support Neil Armstrong
2020-12-18 9:49 ` Neil Armstrong
2020-12-18 9:49 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201218084545.29135-5-christianshewitt@gmail.com \
--to=christianshewitt@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.