From: Christian Hewitt <christianshewitt@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH 5/5] boards: amlogic: update documentation for Beelink GT-King/Pro
Date: Fri, 18 Dec 2020 08:45:45 +0000 [thread overview]
Message-ID: <20201218084545.29135-6-christianshewitt@gmail.com> (raw)
In-Reply-To: <20201218084545.29135-1-christianshewitt@gmail.com>
Update the device matrix and add build instructions.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/beelink-gtking.rst | 115 +++++++++++++++++++++++
doc/board/amlogic/beelink-gtkingpro.rst | 116 ++++++++++++++++++++++++
doc/board/amlogic/index.rst | 4 +-
3 files changed, 234 insertions(+), 1 deletion(-)
create mode 100644 doc/board/amlogic/beelink-gtking.rst
create mode 100644 doc/board/amlogic/beelink-gtkingpro.rst
diff --git a/doc/board/amlogic/beelink-gtking.rst b/doc/board/amlogic/beelink-gtking.rst
new file mode 100644
index 0000000000..56ce2cb273
--- /dev/null
+++ b/doc/board/amlogic/beelink-gtking.rst
@@ -0,0 +1,115 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for Beelink GT-King
+==========================
+
+The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
+board with an S922X-H chip.
+
+- 4GB LPDDR4 RAM
+- 64GB eMMC storage
+- 10/100/1000 Base-T Ethernet
+- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
+- HDMI 2.1 video
+- S/PDIF optical output
+- Analogue audio output
+- 1x USB 2.0 port
+- 2x USB 3.0 ports
+- IR receiver
+- 1x micro SD card slot
+
+Beelink do not provide public schematics, but have been willing
+to share them with known distro developers on request.
+
+U-Boot compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make beelink-gtking_defconfig
+ $ make
+
+Image creation
+--------------
+
+Amlogic does not provide sources for the firmware and for tools needed
+to create the bootloader image. Beelink have provided the Amlogic "SDK"
+in their forums, but the u-boot sources included result in 2GB RAM being
+detected. The following FIPs were generated with newer private sources
+and give correct (4GB) RAM detection:
+
+https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
+
+NB: Beelink use a common board config for GT-King, GT-King Pro and the
+GS-King-X model, hence the "beelink-s922x" name.
+
+.. code-block:: bash
+
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip
+ $ unzip master.zip
+ $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+ $ cp $FIPDIR/* fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
+ $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ fip/aml_encrypt_g12b --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+and then write the image to SD with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/your_sd_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/doc/board/amlogic/beelink-gtkingpro.rst b/doc/board/amlogic/beelink-gtkingpro.rst
new file mode 100644
index 0000000000..d750351361
--- /dev/null
+++ b/doc/board/amlogic/beelink-gtkingpro.rst
@@ -0,0 +1,116 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for Beelink GT-King Pro
+==============================
+
+The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference
+board with an S922X-H chip.
+
+- 4GB LPDDR4 RAM
+- 64GB eMMC storage
+- 10/100/1000 Base-T Ethernet
+- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
+- HDMI 2.1 video
+- Analogue audio output
+- 1x RS232 port
+- 2x USB 2.0 port
+- 2x USB 3.0 ports
+- IR receiver
+- 1x SD card slot
+- 1x Power on/off button
+
+Beelink do not provide public schematics, but have been willing
+to share them with known distro developers on request.
+
+U-Boot compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make beelink-gtkingpro_defconfig
+ $ make
+
+Image creation
+--------------
+
+Amlogic does not provide sources for the firmware and for tools needed
+to create the bootloader image. Beelink have provided the Amlogic "SDK"
+in their forums, but the u-boot sources included result in 2GB RAM being
+detected. The following FIPs were generated with newer private sources
+and give correct (4GB) RAM detection:
+
+https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
+
+NB: Beelink use a common board config for GT-King, GT-King Pro and the
+GS-King-X model, hence the "beelink-s922x" name.
+
+.. code-block:: bash
+
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip
+ $ unzip master.zip
+ $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+ $ cp $FIPDIR/* fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
+ $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ fip/aml_encrypt_g12b --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+and then write the image to SD with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/your_sd_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index a585d857df..275c3664b7 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -17,7 +17,7 @@ This matrix concerns the actual source code version.
+===============================+===========+=================+==============+============+============+=============+==============+
| Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 |
| | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L |
-| | P200 | LibreTech-CC v1 | WeTek Core2 | | | | Odroid-C4 |
+| | P200 | LibreTech-CC v1 | WeTek Core2 | | | GT-King/Pro | Odroid-C4 |
| | P201 | LibreTech-AC v2 | | | | | |
+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
@@ -77,6 +77,8 @@ Board Documentation
.. toctree::
:maxdepth: 1
+ beelink-gtking
+ beelink-gtkingpro
khadas-vim2
khadas-vim3l
khadas-vim3
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Christian Hewitt <christianshewitt@gmail.com>
To: u-boot@lists.denx.de, u-boot-amlogic@groups.io,
linux-amlogic@lists.infradead.org
Cc: Christian Hewitt <christianshewitt@gmail.com>
Subject: [PATCH 5/5] boards: amlogic: update documentation for Beelink GT-King/Pro
Date: Fri, 18 Dec 2020 08:45:45 +0000 [thread overview]
Message-ID: <20201218084545.29135-6-christianshewitt@gmail.com> (raw)
In-Reply-To: <20201218084545.29135-1-christianshewitt@gmail.com>
Update the device matrix and add build instructions.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/beelink-gtking.rst | 115 +++++++++++++++++++++++
doc/board/amlogic/beelink-gtkingpro.rst | 116 ++++++++++++++++++++++++
doc/board/amlogic/index.rst | 4 +-
3 files changed, 234 insertions(+), 1 deletion(-)
create mode 100644 doc/board/amlogic/beelink-gtking.rst
create mode 100644 doc/board/amlogic/beelink-gtkingpro.rst
diff --git a/doc/board/amlogic/beelink-gtking.rst b/doc/board/amlogic/beelink-gtking.rst
new file mode 100644
index 0000000000..56ce2cb273
--- /dev/null
+++ b/doc/board/amlogic/beelink-gtking.rst
@@ -0,0 +1,115 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for Beelink GT-King
+==========================
+
+The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
+board with an S922X-H chip.
+
+- 4GB LPDDR4 RAM
+- 64GB eMMC storage
+- 10/100/1000 Base-T Ethernet
+- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
+- HDMI 2.1 video
+- S/PDIF optical output
+- Analogue audio output
+- 1x USB 2.0 port
+- 2x USB 3.0 ports
+- IR receiver
+- 1x micro SD card slot
+
+Beelink do not provide public schematics, but have been willing
+to share them with known distro developers on request.
+
+U-Boot compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make beelink-gtking_defconfig
+ $ make
+
+Image creation
+--------------
+
+Amlogic does not provide sources for the firmware and for tools needed
+to create the bootloader image. Beelink have provided the Amlogic "SDK"
+in their forums, but the u-boot sources included result in 2GB RAM being
+detected. The following FIPs were generated with newer private sources
+and give correct (4GB) RAM detection:
+
+https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
+
+NB: Beelink use a common board config for GT-King, GT-King Pro and the
+GS-King-X model, hence the "beelink-s922x" name.
+
+.. code-block:: bash
+
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip
+ $ unzip master.zip
+ $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+ $ cp $FIPDIR/* fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
+ $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ fip/aml_encrypt_g12b --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+and then write the image to SD with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/your_sd_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/doc/board/amlogic/beelink-gtkingpro.rst b/doc/board/amlogic/beelink-gtkingpro.rst
new file mode 100644
index 0000000000..d750351361
--- /dev/null
+++ b/doc/board/amlogic/beelink-gtkingpro.rst
@@ -0,0 +1,116 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for Beelink GT-King Pro
+==============================
+
+The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference
+board with an S922X-H chip.
+
+- 4GB LPDDR4 RAM
+- 64GB eMMC storage
+- 10/100/1000 Base-T Ethernet
+- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
+- HDMI 2.1 video
+- Analogue audio output
+- 1x RS232 port
+- 2x USB 2.0 port
+- 2x USB 3.0 ports
+- IR receiver
+- 1x SD card slot
+- 1x Power on/off button
+
+Beelink do not provide public schematics, but have been willing
+to share them with known distro developers on request.
+
+U-Boot compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make beelink-gtkingpro_defconfig
+ $ make
+
+Image creation
+--------------
+
+Amlogic does not provide sources for the firmware and for tools needed
+to create the bootloader image. Beelink have provided the Amlogic "SDK"
+in their forums, but the u-boot sources included result in 2GB RAM being
+detected. The following FIPs were generated with newer private sources
+and give correct (4GB) RAM detection:
+
+https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
+
+NB: Beelink use a common board config for GT-King, GT-King Pro and the
+GS-King-X model, hence the "beelink-s922x" name.
+
+.. code-block:: bash
+
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip
+ $ unzip master.zip
+ $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+ $ cp $FIPDIR/* fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
+ $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ fip/aml_encrypt_g12b --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+and then write the image to SD with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/your_sd_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index a585d857df..275c3664b7 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -17,7 +17,7 @@ This matrix concerns the actual source code version.
+===============================+===========+=================+==============+============+============+=============+==============+
| Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 |
| | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L |
-| | P200 | LibreTech-CC v1 | WeTek Core2 | | | | Odroid-C4 |
+| | P200 | LibreTech-CC v1 | WeTek Core2 | | | GT-King/Pro | Odroid-C4 |
| | P201 | LibreTech-AC v2 | | | | | |
+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
@@ -77,6 +77,8 @@ Board Documentation
.. toctree::
:maxdepth: 1
+ beelink-gtking
+ beelink-gtkingpro
khadas-vim2
khadas-vim3l
khadas-vim3
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Christian Hewitt <christianshewitt@gmail.com>
To: u-boot@lists.denx.de, u-boot-amlogic@groups.io,
linux-amlogic@lists.infradead.org
Cc: Christian Hewitt <christianshewitt@gmail.com>
Subject: [PATCH 5/5] boards: amlogic: update documentation for Beelink GT-King/Pro
Date: Fri, 18 Dec 2020 08:45:45 +0000 [thread overview]
Message-ID: <20201218084545.29135-6-christianshewitt@gmail.com> (raw)
In-Reply-To: <20201218084545.29135-1-christianshewitt@gmail.com>
Update the device matrix and add build instructions.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/beelink-gtking.rst | 115 +++++++++++++++++++++++
doc/board/amlogic/beelink-gtkingpro.rst | 116 ++++++++++++++++++++++++
doc/board/amlogic/index.rst | 4 +-
3 files changed, 234 insertions(+), 1 deletion(-)
create mode 100644 doc/board/amlogic/beelink-gtking.rst
create mode 100644 doc/board/amlogic/beelink-gtkingpro.rst
diff --git a/doc/board/amlogic/beelink-gtking.rst b/doc/board/amlogic/beelink-gtking.rst
new file mode 100644
index 0000000000..56ce2cb273
--- /dev/null
+++ b/doc/board/amlogic/beelink-gtking.rst
@@ -0,0 +1,115 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for Beelink GT-King
+==========================
+
+The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
+board with an S922X-H chip.
+
+- 4GB LPDDR4 RAM
+- 64GB eMMC storage
+- 10/100/1000 Base-T Ethernet
+- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
+- HDMI 2.1 video
+- S/PDIF optical output
+- Analogue audio output
+- 1x USB 2.0 port
+- 2x USB 3.0 ports
+- IR receiver
+- 1x micro SD card slot
+
+Beelink do not provide public schematics, but have been willing
+to share them with known distro developers on request.
+
+U-Boot compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make beelink-gtking_defconfig
+ $ make
+
+Image creation
+--------------
+
+Amlogic does not provide sources for the firmware and for tools needed
+to create the bootloader image. Beelink have provided the Amlogic "SDK"
+in their forums, but the u-boot sources included result in 2GB RAM being
+detected. The following FIPs were generated with newer private sources
+and give correct (4GB) RAM detection:
+
+https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
+
+NB: Beelink use a common board config for GT-King, GT-King Pro and the
+GS-King-X model, hence the "beelink-s922x" name.
+
+.. code-block:: bash
+
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip
+ $ unzip master.zip
+ $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+ $ cp $FIPDIR/* fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
+ $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ fip/aml_encrypt_g12b --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+and then write the image to SD with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/your_sd_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/doc/board/amlogic/beelink-gtkingpro.rst b/doc/board/amlogic/beelink-gtkingpro.rst
new file mode 100644
index 0000000000..d750351361
--- /dev/null
+++ b/doc/board/amlogic/beelink-gtkingpro.rst
@@ -0,0 +1,116 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for Beelink GT-King Pro
+==============================
+
+The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference
+board with an S922X-H chip.
+
+- 4GB LPDDR4 RAM
+- 64GB eMMC storage
+- 10/100/1000 Base-T Ethernet
+- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
+- HDMI 2.1 video
+- Analogue audio output
+- 1x RS232 port
+- 2x USB 2.0 port
+- 2x USB 3.0 ports
+- IR receiver
+- 1x SD card slot
+- 1x Power on/off button
+
+Beelink do not provide public schematics, but have been willing
+to share them with known distro developers on request.
+
+U-Boot compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make beelink-gtkingpro_defconfig
+ $ make
+
+Image creation
+--------------
+
+Amlogic does not provide sources for the firmware and for tools needed
+to create the bootloader image. Beelink have provided the Amlogic "SDK"
+in their forums, but the u-boot sources included result in 2GB RAM being
+detected. The following FIPs were generated with newer private sources
+and give correct (4GB) RAM detection:
+
+https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
+
+NB: Beelink use a common board config for GT-King, GT-King Pro and the
+GS-King-X model, hence the "beelink-s922x" name.
+
+.. code-block:: bash
+
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip
+ $ unzip master.zip
+ $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+ $ cp $FIPDIR/* fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
+ $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ fip/aml_encrypt_g12b --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+and then write the image to SD with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/your_sd_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index a585d857df..275c3664b7 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -17,7 +17,7 @@ This matrix concerns the actual source code version.
+===============================+===========+=================+==============+============+============+=============+==============+
| Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 |
| | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L |
-| | P200 | LibreTech-CC v1 | WeTek Core2 | | | | Odroid-C4 |
+| | P200 | LibreTech-CC v1 | WeTek Core2 | | | GT-King/Pro | Odroid-C4 |
| | P201 | LibreTech-AC v2 | | | | | |
+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
@@ -77,6 +77,8 @@ Board Documentation
.. toctree::
:maxdepth: 1
+ beelink-gtking
+ beelink-gtkingpro
khadas-vim2
khadas-vim3l
khadas-vim3
--
2.17.1
next prev parent reply other threads:[~2020-12-18 8:45 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-18 8:45 [PATCH 0/5] board: amlogic: add Beelink GT-King/Pro support Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 8:45 ` [PATCH 1/5] ARM: dts: import Beelink GT-King/Pro DTs from Linux 5.10 Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 9:42 ` Neil Armstrong
2020-12-18 9:42 ` Neil Armstrong
2020-12-18 9:42 ` Neil Armstrong
2020-12-18 8:45 ` [PATCH 2/5] boards: amlogic: add Beelink S922X board family support Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 9:42 ` Neil Armstrong
2020-12-18 9:42 ` Neil Armstrong
2020-12-18 9:42 ` Neil Armstrong
2020-12-18 8:45 ` [PATCH 3/5] boards: amlogic: add Beelink GT-King defconfig Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 9:43 ` Neil Armstrong
2020-12-18 9:43 ` Neil Armstrong
2020-12-18 9:43 ` Neil Armstrong
2020-12-18 8:45 ` [PATCH 4/5] boards: amlogic: add Beelink GT-King Pro defconfig Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 9:43 ` Neil Armstrong
2020-12-18 9:43 ` Neil Armstrong
2020-12-18 9:43 ` Neil Armstrong
2020-12-18 8:45 ` Christian Hewitt [this message]
2020-12-18 8:45 ` [PATCH 5/5] boards: amlogic: update documentation for Beelink GT-King/Pro Christian Hewitt
2020-12-18 8:45 ` Christian Hewitt
2020-12-18 9:47 ` Neil Armstrong
2020-12-18 9:47 ` Neil Armstrong
2020-12-18 9:47 ` Neil Armstrong
2020-12-18 9:49 ` [PATCH 0/5] board: amlogic: add Beelink GT-King/Pro support Neil Armstrong
2020-12-18 9:49 ` Neil Armstrong
2020-12-18 9:49 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201218084545.29135-6-christianshewitt@gmail.com \
--to=christianshewitt@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.