From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> To: Catalin Marinas <catalin.marinas@arm.com>, Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Cc: peng.fan@nxp.com, Will Deacon <will@kernel.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH] arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA Date: Fri, 18 Dec 2020 17:33:07 +0100 [thread overview] Message-ID: <20201218163307.10150-1-nsaenzjulienne@suse.de> (raw) Systems configured with CONFIG_ZONE_DMA32, CONFIG_ZONE_NORMAL and !CONFIG_ZONE_DMA will fail to properly setup ARCH_LOW_ADDRESS_LIMIT. The limit will default to ~0ULL, effectively spanning the whole memory, which is too high for a configuration that expects low memory to be capped at 4GB. Fix ARCH_LOW_ADDRESS_LIMIT by falling back to arm64_dma32_phys_limit when arm64_dma_phys_limit isn't set. arm64_dma32_phys_limit will honour CONFIG_ZONE_DMA32, or span the entire memory when not enabled. Fixes: 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> --- arch/arm64/include/asm/processor.h | 3 ++- arch/arm64/mm/init.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index ca2cd75d3286..69ad25fbeae4 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -94,7 +94,8 @@ #endif /* CONFIG_ARM64_FORCE_52BIT */ extern phys_addr_t arm64_dma_phys_limit; -#define ARCH_LOW_ADDRESS_LIMIT (arm64_dma_phys_limit - 1) +extern phys_addr_t arm64_dma32_phys_limit; +#define ARCH_LOW_ADDRESS_LIMIT ((arm64_dma_phys_limit ? : arm64_dma32_phys_limit) - 1) struct debug_info { #ifdef CONFIG_HAVE_HW_BREAKPOINT diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 75addb36354a..7deddf56f7c3 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -59,7 +59,7 @@ EXPORT_SYMBOL(memstart_addr); * bit addressable memory area. */ phys_addr_t arm64_dma_phys_limit __ro_after_init; -static phys_addr_t arm64_dma32_phys_limit __ro_after_init; +phys_addr_t arm64_dma32_phys_limit __ro_after_init; #ifdef CONFIG_KEXEC_CORE /* -- 2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> To: Catalin Marinas <catalin.marinas@arm.com>, Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Cc: peng.fan@nxp.com, Will Deacon <will@kernel.org>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH] arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA Date: Fri, 18 Dec 2020 17:33:07 +0100 [thread overview] Message-ID: <20201218163307.10150-1-nsaenzjulienne@suse.de> (raw) Systems configured with CONFIG_ZONE_DMA32, CONFIG_ZONE_NORMAL and !CONFIG_ZONE_DMA will fail to properly setup ARCH_LOW_ADDRESS_LIMIT. The limit will default to ~0ULL, effectively spanning the whole memory, which is too high for a configuration that expects low memory to be capped at 4GB. Fix ARCH_LOW_ADDRESS_LIMIT by falling back to arm64_dma32_phys_limit when arm64_dma_phys_limit isn't set. arm64_dma32_phys_limit will honour CONFIG_ZONE_DMA32, or span the entire memory when not enabled. Fixes: 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> --- arch/arm64/include/asm/processor.h | 3 ++- arch/arm64/mm/init.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index ca2cd75d3286..69ad25fbeae4 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -94,7 +94,8 @@ #endif /* CONFIG_ARM64_FORCE_52BIT */ extern phys_addr_t arm64_dma_phys_limit; -#define ARCH_LOW_ADDRESS_LIMIT (arm64_dma_phys_limit - 1) +extern phys_addr_t arm64_dma32_phys_limit; +#define ARCH_LOW_ADDRESS_LIMIT ((arm64_dma_phys_limit ? : arm64_dma32_phys_limit) - 1) struct debug_info { #ifdef CONFIG_HAVE_HW_BREAKPOINT diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 75addb36354a..7deddf56f7c3 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -59,7 +59,7 @@ EXPORT_SYMBOL(memstart_addr); * bit addressable memory area. */ phys_addr_t arm64_dma_phys_limit __ro_after_init; -static phys_addr_t arm64_dma32_phys_limit __ro_after_init; +phys_addr_t arm64_dma32_phys_limit __ro_after_init; #ifdef CONFIG_KEXEC_CORE /* -- 2.29.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-12-18 16:34 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-18 16:33 Nicolas Saenz Julienne [this message] 2020-12-18 16:33 ` [PATCH] arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA Nicolas Saenz Julienne 2021-01-04 11:49 ` Catalin Marinas 2021-01-04 11:49 ` Catalin Marinas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201218163307.10150-1-nsaenzjulienne@suse.de \ --to=nsaenzjulienne@suse.de \ --cc=catalin.marinas@arm.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=peng.fan@nxp.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.