From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org, khilman@baylibre.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, narmstrong@baylibre.com,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH 0/5] Thermal zone configuration for Meson8/Meson8b/Meson8m2
Date: Mon, 21 Dec 2020 19:13:01 +0100 [thread overview]
Message-ID: <20201221181306.904272-1-martin.blumenstingl@googlemail.com> (raw)
This adds the thermal zone configuration on Meson8/Meson8b/Meson8m2
SoCs. The thermal sensor reading is taken from SAR ADC. With
"generic-adc-thermal" it is then used to configure the thermal zone.
CPU and GPU frequencies can both be managed. The vendor kernel also
manages the number of active GPU pixel processor cores. This is not
supported yet so we skip it.
Martin Blumenstingl (5):
ARM: dts: meson: move iio-hwmon for the SoC temperature to meson.dtsi
ARM: dts: meson: add the ADC thermal sensor to meson.dtsi
ARM: dts: meson8: add the thermal-zones with cooling configuration
ARM: dts: meson8b: add the thermal-zones with cooling configuration
ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
arch/arm/boot/dts/meson.dtsi | 12 +++++
arch/arm/boot/dts/meson8.dtsi | 54 +++++++++++++++++++++++
arch/arm/boot/dts/meson8b-ec100.dts | 5 ---
arch/arm/boot/dts/meson8b-mxq.dts | 5 ---
arch/arm/boot/dts/meson8b-odroidc1.dts | 5 ---
arch/arm/boot/dts/meson8b.dtsi | 54 +++++++++++++++++++++++
arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 5 ---
arch/arm/configs/multi_v7_defconfig | 1 +
8 files changed, 121 insertions(+), 20 deletions(-)
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org, khilman@baylibre.com
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, narmstrong@baylibre.com
Subject: [PATCH 0/5] Thermal zone configuration for Meson8/Meson8b/Meson8m2
Date: Mon, 21 Dec 2020 19:13:01 +0100 [thread overview]
Message-ID: <20201221181306.904272-1-martin.blumenstingl@googlemail.com> (raw)
This adds the thermal zone configuration on Meson8/Meson8b/Meson8m2
SoCs. The thermal sensor reading is taken from SAR ADC. With
"generic-adc-thermal" it is then used to configure the thermal zone.
CPU and GPU frequencies can both be managed. The vendor kernel also
manages the number of active GPU pixel processor cores. This is not
supported yet so we skip it.
Martin Blumenstingl (5):
ARM: dts: meson: move iio-hwmon for the SoC temperature to meson.dtsi
ARM: dts: meson: add the ADC thermal sensor to meson.dtsi
ARM: dts: meson8: add the thermal-zones with cooling configuration
ARM: dts: meson8b: add the thermal-zones with cooling configuration
ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
arch/arm/boot/dts/meson.dtsi | 12 +++++
arch/arm/boot/dts/meson8.dtsi | 54 +++++++++++++++++++++++
arch/arm/boot/dts/meson8b-ec100.dts | 5 ---
arch/arm/boot/dts/meson8b-mxq.dts | 5 ---
arch/arm/boot/dts/meson8b-odroidc1.dts | 5 ---
arch/arm/boot/dts/meson8b.dtsi | 54 +++++++++++++++++++++++
arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 5 ---
arch/arm/configs/multi_v7_defconfig | 1 +
8 files changed, 121 insertions(+), 20 deletions(-)
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org, khilman@baylibre.com
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, narmstrong@baylibre.com
Subject: [PATCH 0/5] Thermal zone configuration for Meson8/Meson8b/Meson8m2
Date: Mon, 21 Dec 2020 19:13:01 +0100 [thread overview]
Message-ID: <20201221181306.904272-1-martin.blumenstingl@googlemail.com> (raw)
This adds the thermal zone configuration on Meson8/Meson8b/Meson8m2
SoCs. The thermal sensor reading is taken from SAR ADC. With
"generic-adc-thermal" it is then used to configure the thermal zone.
CPU and GPU frequencies can both be managed. The vendor kernel also
manages the number of active GPU pixel processor cores. This is not
supported yet so we skip it.
Martin Blumenstingl (5):
ARM: dts: meson: move iio-hwmon for the SoC temperature to meson.dtsi
ARM: dts: meson: add the ADC thermal sensor to meson.dtsi
ARM: dts: meson8: add the thermal-zones with cooling configuration
ARM: dts: meson8b: add the thermal-zones with cooling configuration
ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
arch/arm/boot/dts/meson.dtsi | 12 +++++
arch/arm/boot/dts/meson8.dtsi | 54 +++++++++++++++++++++++
arch/arm/boot/dts/meson8b-ec100.dts | 5 ---
arch/arm/boot/dts/meson8b-mxq.dts | 5 ---
arch/arm/boot/dts/meson8b-odroidc1.dts | 5 ---
arch/arm/boot/dts/meson8b.dtsi | 54 +++++++++++++++++++++++
arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 5 ---
arch/arm/configs/multi_v7_defconfig | 1 +
8 files changed, 121 insertions(+), 20 deletions(-)
--
2.29.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2020-12-21 18:14 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-21 18:13 Martin Blumenstingl [this message]
2020-12-21 18:13 ` [PATCH 0/5] Thermal zone configuration for Meson8/Meson8b/Meson8m2 Martin Blumenstingl
2020-12-21 18:13 ` Martin Blumenstingl
2020-12-21 18:13 ` [PATCH 1/5] ARM: dts: meson: move iio-hwmon for the SoC temperature to meson.dtsi Martin Blumenstingl
2020-12-21 18:13 ` Martin Blumenstingl
2020-12-21 18:13 ` Martin Blumenstingl
2021-01-11 14:03 ` Neil Armstrong
2021-01-11 14:03 ` Neil Armstrong
2021-01-11 14:03 ` Neil Armstrong
2020-12-21 18:13 ` [PATCH 2/5] ARM: dts: meson: add the ADC thermal sensor " Martin Blumenstingl
2020-12-21 18:13 ` Martin Blumenstingl
2020-12-21 18:13 ` Martin Blumenstingl
2021-01-11 14:03 ` Neil Armstrong
2021-01-11 14:03 ` Neil Armstrong
2021-01-11 14:03 ` Neil Armstrong
2020-12-21 18:13 ` [PATCH 3/5] ARM: dts: meson8: add the thermal-zones with cooling configuration Martin Blumenstingl
2020-12-21 18:13 ` Martin Blumenstingl
2020-12-21 18:13 ` Martin Blumenstingl
2021-01-11 14:04 ` Neil Armstrong
2021-01-11 14:04 ` Neil Armstrong
2021-01-11 14:04 ` Neil Armstrong
2020-12-21 18:13 ` [PATCH 4/5] ARM: dts: meson8b: " Martin Blumenstingl
2020-12-21 18:13 ` Martin Blumenstingl
2020-12-21 18:13 ` Martin Blumenstingl
2021-01-11 14:04 ` Neil Armstrong
2021-01-11 14:04 ` Neil Armstrong
2021-01-11 14:04 ` Neil Armstrong
2020-12-21 18:13 ` [PATCH 5/5] ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor Martin Blumenstingl
2020-12-21 18:13 ` Martin Blumenstingl
2020-12-21 18:13 ` Martin Blumenstingl
2021-01-25 18:42 ` [PATCH 0/5] Thermal zone configuration for Meson8/Meson8b/Meson8m2 Kevin Hilman
2021-01-25 18:42 ` Kevin Hilman
2021-01-25 18:42 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201221181306.904272-1-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.