From: Timon Baetz <timon.baetz@protonmail.com>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Lee Jones <lee.jones@linaro.org>,
Sebastian Reichel <sre@kernel.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-pm@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
Timon Baetz <timon.baetz@protonmail.com>
Subject: [PATCH v4 2/7] regulator: dt-bindings: Document max8997-pmic nodes
Date: Wed, 23 Dec 2020 13:42:43 +0000 [thread overview]
Message-ID: <20201223134221.804943-2-timon.baetz@protonmail.com> (raw)
In-Reply-To: <20201223134221.804943-1-timon.baetz@protonmail.com>
Add maxim,max8997-battery and maxim,max8997-muic optional nodes.
Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
---
.../bindings/regulator/max8997-regulator.txt | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
index 6fe825b8ac1b..faaf2bbf0272 100644
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -53,6 +53,18 @@ Additional properties required if either of the optional properties are used:
- max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used
for dvs. The format of the gpio specifier depends in the gpio controller.
+Optional nodes:
+- charger: Node for configuring the charger driver.
+ Required properties:
+ - compatible: "maxim,max8997-battery"
+ Optional properties:
+ - extcon: extcon specifier for charging events
+ - charger-supply: regulator node for charging current
+
+- muic: Node used only by extcon consumers.
+ Required properties:
+ - compatible: "maxim,max8997-muic"
+
Regulators: The regulators of max8997 that have to be instantiated should be
included in a sub-node named 'regulators'. Regulator nodes included in this
sub-node should be of the format as listed below.
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Timon Baetz <timon.baetz@protonmail.com>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
Timon Baetz <timon.baetz@protonmail.com>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Sebastian Reichel <sre@kernel.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
~postmarketos/upstreaming@lists.sr.ht,
Lee Jones <lee.jones@linaro.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/7] regulator: dt-bindings: Document max8997-pmic nodes
Date: Wed, 23 Dec 2020 13:42:43 +0000 [thread overview]
Message-ID: <20201223134221.804943-2-timon.baetz@protonmail.com> (raw)
In-Reply-To: <20201223134221.804943-1-timon.baetz@protonmail.com>
Add maxim,max8997-battery and maxim,max8997-muic optional nodes.
Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
---
.../bindings/regulator/max8997-regulator.txt | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
index 6fe825b8ac1b..faaf2bbf0272 100644
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -53,6 +53,18 @@ Additional properties required if either of the optional properties are used:
- max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used
for dvs. The format of the gpio specifier depends in the gpio controller.
+Optional nodes:
+- charger: Node for configuring the charger driver.
+ Required properties:
+ - compatible: "maxim,max8997-battery"
+ Optional properties:
+ - extcon: extcon specifier for charging events
+ - charger-supply: regulator node for charging current
+
+- muic: Node used only by extcon consumers.
+ Required properties:
+ - compatible: "maxim,max8997-muic"
+
Regulators: The regulators of max8997 that have to be instantiated should be
included in a sub-node named 'regulators'. Regulator nodes included in this
sub-node should be of the format as listed below.
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-12-23 13:43 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-23 13:42 [PATCH v4 1/7] extcon: max8997: Add CHGINS and CHGRM interrupt handling Timon Baetz
2020-12-23 13:42 ` Timon Baetz
2020-12-23 13:42 ` Timon Baetz [this message]
2020-12-23 13:42 ` [PATCH v4 2/7] regulator: dt-bindings: Document max8997-pmic nodes Timon Baetz
2020-12-24 9:45 ` Krzysztof Kozlowski
2020-12-24 9:45 ` Krzysztof Kozlowski
2020-12-23 13:42 ` [PATCH v4 3/7] mfd: max8997: Add of_compatible to extcon and charger mfd_cell Timon Baetz
2020-12-23 13:42 ` Timon Baetz
2020-12-23 15:32 ` Lee Jones
2020-12-23 15:32 ` Lee Jones
2020-12-24 11:23 ` Timon Baetz
2020-12-24 11:23 ` Timon Baetz
2020-12-24 12:58 ` Lee Jones
2020-12-24 12:58 ` Lee Jones
2020-12-23 13:43 ` [PATCH v4 4/7] power: supply: max8997_charger: Set CHARGER current limit Timon Baetz
2020-12-23 13:43 ` Timon Baetz
2020-12-24 9:55 ` Krzysztof Kozlowski
2020-12-24 9:55 ` Krzysztof Kozlowski
2020-12-24 13:13 ` Timon Baetz
2020-12-24 13:13 ` Timon Baetz
2020-12-24 13:37 ` Krzysztof Kozlowski
2020-12-24 13:37 ` Krzysztof Kozlowski
2020-12-24 14:00 ` Krzysztof Kozlowski
2020-12-24 14:00 ` Krzysztof Kozlowski
2020-12-25 11:33 ` Timon Baetz
2020-12-25 11:33 ` Timon Baetz
2020-12-28 10:30 ` Krzysztof Kozlowski
2020-12-28 10:30 ` Krzysztof Kozlowski
2020-12-23 13:43 ` [PATCH v4 5/7] ARM: dts: exynos: Added muic and charger nodes for i9100 Timon Baetz
2020-12-23 13:43 ` Timon Baetz
2020-12-23 13:43 ` [PATCH v4 6/7] ARM: dts: exynos: Fix charging regulator voltage and current " Timon Baetz
2020-12-23 13:43 ` Timon Baetz
2020-12-23 13:43 ` [PATCH v4 7/7] ARM: dts: exynos: Add top-off charging regulator node " Timon Baetz
2020-12-23 13:43 ` Timon Baetz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201223134221.804943-2-timon.baetz@protonmail.com \
--to=timon.baetz@protonmail.com \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.