All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-media@vger.kernel.org
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>,
	Benoit Parrot <bparrot@ti.com>, Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org
Subject: [PATCH 1/2] dt-bindings: media: Add bindings for OmniVision OV1063x sensors
Date: Mon,  4 Jan 2021 07:39:44 +0200	[thread overview]
Message-ID: <20210104053945.12409-2-laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <20210104053945.12409-1-laurent.pinchart@ideasonboard.com>

From: Benoit Parrot <bparrot@ti.com>

Add device tree bindings for the OmniVision OV10633 and OV10635 camera
sensors.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 .../bindings/media/i2c/ov1063x.yaml           | 97 +++++++++++++++++++
 MAINTAINERS                                   |  7 ++
 2 files changed, 104 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov1063x.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/ov1063x.yaml b/Documentation/devicetree/bindings/media/i2c/ov1063x.yaml
new file mode 100644
index 000000000000..b5e08dd2f496
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov1063x.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov1063x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV10633/OV1035 Camera Sensor
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The OmniVision OV1063x is a 720p camera sensor which supports resolutions up
+  to 1280x800 and 8- and 10-bit YUV output formats.
+
+properties:
+  compatible:
+    enum:
+      - ovti,ov10633
+      - ovti,ov10635
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clocks-names:
+    const: xvclk
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Specifier for the GPIO connected to the RESETB pin.
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      Specifier for the GPIO connected to the PWDN pin.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: ../video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          hsync-active: true
+          vsync-active: true
+          pclk-sample: true
+          bus-width:
+            enum: [ 8, 10 ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clocks-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        clock-frequency = <400000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@37 {
+            compatible = "ovti,ov10633";
+            reg = <0x37>;
+
+            clocks = <&fixed_clock>;
+            clocks-names = "xvclk";
+
+            reset-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+            powerdown-gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;
+
+            port {
+                camera1: endpoint {
+                     remote-endpoint = <&vin1a_ep>;
+                     hsync-active = <1>;
+                     vsync-active = <1>;
+                     pclk-sample = <0>;
+                     bus-width = <8>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 281de213ef47..9dc3a7d75460 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12867,6 +12867,13 @@ M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/char/pcmcia/cm4040_cs.*
 
+OMNIVISION OV10633 SENSOR DRIVER
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/ov1063x.yaml
+
 OMNIVISION OV13858 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
-- 
Regards,

Laurent Pinchart


  reply	other threads:[~2021-01-04  5:41 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-04  5:39 [PATCH 0/2] media: Driver for OV1063x camera sensor Laurent Pinchart
2021-01-04  5:39 ` Laurent Pinchart [this message]
2021-01-05 17:49   ` [PATCH 1/2] dt-bindings: media: Add bindings for OmniVision OV1063x sensors Rob Herring
2021-01-12  9:31   ` Tomi Valkeinen
2021-01-04  5:39 ` [PATCH 2/2] media: i2c: Add OV1063x sensor driver Laurent Pinchart
2021-01-04 11:41   ` Sakari Ailus
2021-01-04 13:56     ` Laurent Pinchart
2021-12-06 22:23     ` Laurent Pinchart
2021-01-04 12:47   ` Sakari Ailus
2021-01-04 13:05     ` Laurent Pinchart
2021-01-04 13:55       ` Sakari Ailus
2021-01-12 13:32   ` Tomi Valkeinen
2021-01-14  5:32     ` Laurent Pinchart
2021-01-18 14:04   ` Tomi Valkeinen
2021-01-20  8:26     ` Laurent Pinchart
2021-01-20 11:52       ` Tomi Valkeinen
2021-02-08 14:18   ` Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210104053945.12409-2-laurent.pinchart@ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=bparrot@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.