All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Krzysztof Kozlowski <krzk@kernel.org>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
	linux-rtc@vger.kernel.org,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH] rtc: s5m: use devm_i2c_new_dummy_device()
Date: Wed,  6 Jan 2021 07:47:01 +0100	[thread overview]
Message-ID: <20210106064701.30682-1-brgl@bgdev.pl> (raw)

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Use the managed variant of i2c_new_dummy_device() to shrink code and
remove the goto label. We can drop the remove callback now too.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/rtc/rtc-s5m.c | 34 ++++++++--------------------------
 1 file changed, 8 insertions(+), 26 deletions(-)

diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index eb9dde4095a9..8d42592bc58e 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -760,7 +760,8 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	info->i2c = i2c_new_dummy_device(s5m87xx->i2c->adapter, RTC_I2C_ADDR);
+	info->i2c = devm_i2c_new_dummy_device(&pdev->dev, s5m87xx->i2c->adapter,
+					      RTC_I2C_ADDR);
 	if (IS_ERR(info->i2c)) {
 		dev_err(&pdev->dev, "Failed to allocate I2C for RTC\n");
 		return PTR_ERR(info->i2c);
@@ -768,10 +769,9 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 
 	info->regmap = devm_regmap_init_i2c(info->i2c, regmap_cfg);
 	if (IS_ERR(info->regmap)) {
-		ret = PTR_ERR(info->regmap);
 		dev_err(&pdev->dev, "Failed to allocate RTC register map: %d\n",
-				ret);
-		goto err;
+			ret);
+		return PTR_ERR(info->regmap);
 	}
 
 	info->dev = &pdev->dev;
@@ -781,10 +781,9 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 	if (s5m87xx->irq_data) {
 		info->irq = regmap_irq_get_virq(s5m87xx->irq_data, alarm_irq);
 		if (info->irq <= 0) {
-			ret = -EINVAL;
 			dev_err(&pdev->dev, "Failed to get virtual IRQ %d\n",
 				alarm_irq);
-			goto err;
+			return -EINVAL;
 		}
 	}
 
@@ -797,10 +796,8 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 	info->rtc_dev = devm_rtc_device_register(&pdev->dev, "s5m-rtc",
 						 &s5m_rtc_ops, THIS_MODULE);
 
-	if (IS_ERR(info->rtc_dev)) {
-		ret = PTR_ERR(info->rtc_dev);
-		goto err;
-	}
+	if (IS_ERR(info->rtc_dev))
+		return PTR_ERR(info->rtc_dev);
 
 	if (!info->irq) {
 		dev_info(&pdev->dev, "Alarm IRQ not available\n");
@@ -813,23 +810,9 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
 			info->irq, ret);
-		goto err;
+		return ret;
 	}
 
-	return 0;
-
-err:
-	i2c_unregister_device(info->i2c);
-
-	return ret;
-}
-
-static int s5m_rtc_remove(struct platform_device *pdev)
-{
-	struct s5m_rtc_info *info = platform_get_drvdata(pdev);
-
-	i2c_unregister_device(info->i2c);
-
 	return 0;
 }
 
@@ -874,7 +857,6 @@ static struct platform_driver s5m_rtc_driver = {
 		.pm	= &s5m_rtc_pm_ops,
 	},
 	.probe		= s5m_rtc_probe,
-	.remove		= s5m_rtc_remove,
 	.id_table	= s5m_rtc_id,
 };
 
-- 
2.29.1


             reply	other threads:[~2021-01-06  6:47 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-06  6:47 Bartosz Golaszewski [this message]
  -- strict thread matches above, loose matches on Subject: below --
2021-01-05 13:44 [PATCH] rtc: s5m: use devm_i2c_new_dummy_device() Bartosz Golaszewski
2021-01-05 16:50 ` Krzysztof Kozlowski
2021-01-06  6:34   ` Bartosz Golaszewski
2021-01-06  6:46 ` kernel test robot
2021-01-06  6:46   ` kernel test robot
2021-01-06  6:52   ` Bartosz Golaszewski
2021-01-06  6:52     ` Bartosz Golaszewski
2021-01-06  6:59     ` Bartosz Golaszewski
2021-01-06  6:59       ` Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210106064701.30682-1-brgl@bgdev.pl \
    --to=brgl@bgdev.pl \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.