From: Andre Przywara <andre.przywara@arm.com> To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh@kernel.org> Cc: Jernej Skrabec <jernej.skrabec@siol.net>, Icenowy Zheng <icenowy@aosc.io>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@googlegroups.com Subject: [PATCH 3/7] arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card Date: Wed, 6 Jan 2021 15:05:21 +0000 [thread overview] Message-ID: <20210106150525.15403-4-andre.przywara@arm.com> (raw) In-Reply-To: <20210106150525.15403-1-andre.przywara@arm.com> The SD card on the SoPine SoM module is somewhat concealed, so was originally defined as "non-removable". However there is a working card-detect pin, and in certain SoM base boards it might be actually accessible at runtime. Also the Pine64-LTS shares the SoPine base .dtsi, so inherited the non-removable flag, even though the SD card slot is perfectly accessible and usable there. (It turns out that just *my* board has a broken card detect switch, so I originally thought CD wouldn't work on the LTS.) Drop the "non-removable" flag to describe the SD card slot properly. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index c48692b06e1f..3402cec87035 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -32,7 +32,6 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - non-removable; disable-wp; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ -- 2.17.5
WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com> To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org, Jernej Skrabec <jernej.skrabec@siol.net>, linux-sunxi@googlegroups.com, linux-arm-kernel@lists.infradead.org, Icenowy Zheng <icenowy@aosc.io> Subject: [PATCH 3/7] arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card Date: Wed, 6 Jan 2021 15:05:21 +0000 [thread overview] Message-ID: <20210106150525.15403-4-andre.przywara@arm.com> (raw) In-Reply-To: <20210106150525.15403-1-andre.przywara@arm.com> The SD card on the SoPine SoM module is somewhat concealed, so was originally defined as "non-removable". However there is a working card-detect pin, and in certain SoM base boards it might be actually accessible at runtime. Also the Pine64-LTS shares the SoPine base .dtsi, so inherited the non-removable flag, even though the SD card slot is perfectly accessible and usable there. (It turns out that just *my* board has a broken card detect switch, so I originally thought CD wouldn't work on the LTS.) Drop the "non-removable" flag to describe the SD card slot properly. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index c48692b06e1f..3402cec87035 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -32,7 +32,6 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - non-removable; disable-wp; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ -- 2.17.5 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-06 15:06 UTC|newest] Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-06 15:05 [PATCH 0/7] arm64: dts: allwinner: Various DT fixes Andre Przywara 2021-01-06 15:05 ` Andre Przywara 2021-01-06 15:05 ` [PATCH 1/7] arm64: dts: allwinner: H6/A64: properly connect USB PHY to port 0 Andre Przywara 2021-01-06 15:05 ` Andre Przywara 2021-01-06 15:56 ` [linux-sunxi] " Chen-Yu Tsai 2021-01-06 15:56 ` Chen-Yu Tsai 2021-01-13 10:30 ` André Przywara 2021-01-13 10:30 ` André Przywara 2021-01-13 10:43 ` Chen-Yu Tsai 2021-01-13 10:43 ` Chen-Yu Tsai 2021-01-06 15:05 ` [PATCH 2/7] arm64: dts: allwinner: Pine64-LTS: Add status LED Andre Przywara 2021-01-06 15:05 ` Andre Przywara 2021-01-06 15:53 ` [linux-sunxi] " Chen-Yu Tsai 2021-01-06 15:53 ` Chen-Yu Tsai 2021-01-06 16:08 ` André Przywara 2021-01-06 16:08 ` André Przywara 2021-01-13 14:02 ` Emmanuel Vadot 2021-01-13 14:02 ` Emmanuel Vadot 2021-01-06 16:01 ` Maxime Ripard 2021-01-06 16:01 ` Maxime Ripard 2021-01-06 15:05 ` Andre Przywara [this message] 2021-01-06 15:05 ` [PATCH 3/7] arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card Andre Przywara 2021-01-06 15:57 ` [linux-sunxi] " Chen-Yu Tsai 2021-01-06 15:57 ` Chen-Yu Tsai 2021-01-06 15:05 ` [PATCH 4/7] arm64: dts: allwinner: H6: Allow up to 150 MHz MMC bus frequency Andre Przywara 2021-01-06 15:05 ` Andre Przywara 2021-01-06 16:01 ` [linux-sunxi] " Chen-Yu Tsai 2021-01-06 16:01 ` Chen-Yu Tsai 2021-01-06 15:05 ` [PATCH 5/7] arm64: dts: allwinner: A64: Limit MMC2 bus frequency to 150 MHz Andre Przywara 2021-01-06 15:05 ` Andre Przywara 2021-01-06 15:58 ` [linux-sunxi] " Chen-Yu Tsai 2021-01-06 15:58 ` Chen-Yu Tsai 2021-01-06 15:05 ` [PATCH 6/7] arm64: dts: allwinner: Pine64-LTS/SoPine: Enable HS200 eMMC mode Andre Przywara 2021-01-06 15:05 ` Andre Przywara 2021-01-06 15:59 ` [linux-sunxi] " Chen-Yu Tsai 2021-01-06 15:59 ` Chen-Yu Tsai 2021-01-06 15:05 ` [PATCH 7/7] arm64: dts: allwinner: Pine H64: " Andre Przywara 2021-01-06 15:05 ` Andre Przywara 2021-01-06 16:00 ` [linux-sunxi] " Chen-Yu Tsai 2021-01-06 16:00 ` Chen-Yu Tsai
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210106150525.15403-4-andre.przywara@arm.com \ --to=andre.przywara@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=icenowy@aosc.io \ --cc=jernej.skrabec@siol.net \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-sunxi@googlegroups.com \ --cc=mripard@kernel.org \ --cc=robh@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.