From: Ryan Chen <ryan_chen@aspeedtech.com> To: <BMC-SW@aspeedtech.com>, Felipe Balbi <balbi@kernel.org>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>, <linux-usb@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org> Cc: Ryan Chen <ryan_chen@aspeedtech.com> Subject: [PATCH 1/1] usb: gadget: aspeed: fix stop dma register setting. Date: Fri, 8 Jan 2021 16:12:38 +0800 [thread overview] Message-ID: <20210108081238.10199-2-ryan_chen@aspeedtech.com> (raw) In-Reply-To: <20210108081238.10199-1-ryan_chen@aspeedtech.com> The vhub engine has two dma mode, one is descriptor list, another is single stage DMA. Each mode has different stop register setting. Descriptor list operation (bit2) : 0 disable reset, 1: enable reset Single mode operation (bit0) : 0 : disable, 1: enable Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> --- drivers/usb/gadget/udc/aspeed-vhub/epn.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c index 0bd6b20435b8..02d8bfae58fb 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c @@ -420,7 +420,10 @@ static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep, u32 state, reg, loops; /* Stop DMA activity */ - writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + if (ep->epn.desc_mode) + writel(VHUB_EP_DMA_CTRL_RESET, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + else + writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); /* Wait for it to complete */ for (loops = 0; loops < 1000; loops++) { -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Ryan Chen <ryan_chen@aspeedtech.com> To: <BMC-SW@aspeedtech.com>, Felipe Balbi <balbi@kernel.org>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>, <linux-usb@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org> Cc: Ryan Chen <ryan_chen@aspeedtech.com> Subject: [PATCH 1/1] usb: gadget: aspeed: fix stop dma register setting. Date: Fri, 8 Jan 2021 16:12:38 +0800 [thread overview] Message-ID: <20210108081238.10199-2-ryan_chen@aspeedtech.com> (raw) In-Reply-To: <20210108081238.10199-1-ryan_chen@aspeedtech.com> The vhub engine has two dma mode, one is descriptor list, another is single stage DMA. Each mode has different stop register setting. Descriptor list operation (bit2) : 0 disable reset, 1: enable reset Single mode operation (bit0) : 0 : disable, 1: enable Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> --- drivers/usb/gadget/udc/aspeed-vhub/epn.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c index 0bd6b20435b8..02d8bfae58fb 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c @@ -420,7 +420,10 @@ static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep, u32 state, reg, loops; /* Stop DMA activity */ - writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + if (ep->epn.desc_mode) + writel(VHUB_EP_DMA_CTRL_RESET, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + else + writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); /* Wait for it to complete */ for (loops = 0; loops < 1000; loops++) { -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-08 8:15 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-08 8:12 [PATCH 0/1] Fix vhub engine stop dma register setting Ryan Chen 2021-01-08 8:12 ` Ryan Chen 2021-01-08 8:12 ` Ryan Chen [this message] 2021-01-08 8:12 ` [PATCH 1/1] usb: gadget: aspeed: fix " Ryan Chen 2021-01-08 12:21 ` Felipe Balbi 2021-01-08 12:21 ` Felipe Balbi 2021-01-11 2:24 ` Joel Stanley 2021-01-11 2:24 ` Joel Stanley
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210108081238.10199-2-ryan_chen@aspeedtech.com \ --to=ryan_chen@aspeedtech.com \ --cc=BMC-SW@aspeedtech.com \ --cc=andrew@aj.id.au \ --cc=balbi@kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=joel@jms.id.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-aspeed@lists.ozlabs.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.