All of lore.kernel.org
 help / color / mirror / Atom feed
From: Damien Le Moal <damien.lemoal@wdc.com>
To: Palmer Dabbelt <palmer@dabbelt.com>, linux-riscv@lists.infradead.org
Cc: Sean Anderson <seanga2@gmail.com>
Subject: [PATCH v11 06/10] riscv: Add SiPeed MAIX GO board device tree
Date: Tue, 12 Jan 2021 09:58:44 +0900	[thread overview]
Message-ID: <20210112005848.199951-7-damien.lemoal@wdc.com> (raw)
In-Reply-To: <20210112005848.199951-1-damien.lemoal@wdc.com>

Add the device tree sipeed_maix_go.dts for the SiPeed MAIX GO board.
This device tree enables buttons, LEDs, gpio, i2c and spi/mmc SD card
devices.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
---
 arch/riscv/boot/dts/canaan/sipeed_maix_go.dts | 237 ++++++++++++++++++
 1 file changed, 237 insertions(+)
 create mode 100644 arch/riscv/boot/dts/canaan/sipeed_maix_go.dts

diff --git a/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts b/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts
new file mode 100644
index 000000000000..c3294dfaa3c6
--- /dev/null
+++ b/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SiPeed MAIX GO";
+	compatible = "sipeed,maix-go", "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green {
+			gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		red {
+			gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>;
+		};
+
+		blue {
+			gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		up {
+			label = "UP";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1_0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		press {
+			label = "PRESS";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		down {
+			label = "DOWN";
+			linux,code = <BTN_2>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&mic>;
+		};
+	};
+
+	mic: mic {
+		#sound-dai-cells = <0>;
+		compatible = "memsensing,msm261s4030h0";
+		status = "disabled";
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&jtag_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	jtag_pinctrl: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	gpio_pinctrl: gpio-pinmux {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(9, K210_PCF_GPIO1)>,
+			 <K210_FPIOA(10, K210_PCF_GPIO2)>,
+			 <K210_FPIOA(11, K210_PCF_GPIO3)>,
+			 <K210_FPIOA(12, K210_PCF_GPIO4)>,
+			 <K210_FPIOA(13, K210_PCF_GPIO5)>,
+			 <K210_FPIOA(14, K210_PCF_GPIO6)>,
+			 <K210_FPIOA(15, K210_PCF_GPIO7)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(17, K210_PCF_GPIOHS1)>,
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>,
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>,
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>,
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>,
+			 <K210_FPIOA(33, K210_PCF_GPIOHS17)>,
+			 <K210_FPIOA(34, K210_PCF_GPIOHS18)>,
+			 <K210_FPIOA(35, K210_PCF_GPIOHS19)>;
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_GPIOHS13)>; /* cs */
+	};
+
+	i2c1_pinctrl: i2c1-pinmux {
+		pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>,
+			 <K210_FPIOA(31, K210_PCF_I2C1_SDA)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&gpio_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pinctrl>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&dvp0 {
+	pinctrl-0 = <&dvp_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		spi-max-frequency = <15000000>;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};
-- 
2.29.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply	other threads:[~2021-01-12  0:59 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-12  0:58 [PATCH v11 00/10] RISC-V Kendryte K210 support improvements Damien Le Moal
2021-01-12  0:58 ` [PATCH v11 01/10] clk: Add RISC-V Canaan Kendryte K210 clock driver Damien Le Moal
2021-01-12  0:58 ` [PATCH v11 02/10] pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver Damien Le Moal
2021-01-14 23:32   ` Palmer Dabbelt
2021-01-15  0:17     ` Damien Le Moal
2021-01-15  0:39       ` Sean Anderson
2021-01-12  0:58 ` [PATCH v11 03/10] riscv: Update Canaan Kendryte K210 device tree Damien Le Moal
2021-01-14 23:32   ` Palmer Dabbelt
     [not found]     ` <9d32abd1-ffb4-a887-a40d-fc173a371d23@gmail.com>
2021-01-15  0:06       ` Sean Anderson
2021-01-15  0:35         ` Sean Anderson
2021-01-15  1:03           ` Damien Le Moal
2021-01-15  1:14             ` Sean Anderson
2021-01-15  1:18               ` Damien Le Moal
2021-01-15  0:33     ` Damien Le Moal
2021-01-15  5:56     ` Damien Le Moal
2021-01-12  0:58 ` [PATCH v11 04/10] riscv: Add SiPeed MAIX BiT board " Damien Le Moal
2021-01-12  0:58 ` [PATCH v11 05/10] riscv: Add SiPeed MAIX DOCK " Damien Le Moal
2021-01-12  0:58 ` Damien Le Moal [this message]
2021-01-12  0:58 ` [PATCH v11 07/10] riscv: Add SiPeed MAIXDUINO " Damien Le Moal
2021-01-12  0:58 ` [PATCH v11 08/10] riscv: Add Kendryte KD233 " Damien Le Moal
2021-01-12  0:58 ` [PATCH v11 09/10] riscv: Update Canaan Kendryte K210 defconfig Damien Le Moal
2021-01-12  0:58 ` [PATCH v11 10/10] riscv: Add Canaan Kendryte K210 SD card defconfig Damien Le Moal
2021-01-12  1:07 ` [PATCH v11 00/10] RISC-V Kendryte K210 support improvements Damien Le Moal
2021-01-12  1:07   ` Damien Le Moal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210112005848.199951-7-damien.lemoal@wdc.com \
    --to=damien.lemoal@wdc.com \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=seanga2@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.